• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.155-164
• /
• 2002

The power steering system for vehicles is becoming essential for supporting the steering efforts of the drivers, especially for the parking lot maneuver Although hydraulic power steering has been widely used for years, its efficiency is not high enough. The problems associated with a hydraulic howe. steering system can be solved by a motor driven power steering (MDPS) system. In this study, a dynamic model and a control algorithm for the ball screw type of MDPS system have been derived and analyzed by using the method of discrete modeling technology. To improve steering feel and power steering characteristics, two derivative gains are added to the conventional power boosting control algorithm. Through simulations, the effects of the control gain on the steering angle gain were verified in the frequency domain. The steering returnability and steering torque phase lag in on-center handling test were also evaluated in the time domain.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1261-1267
• /
• 2003

The Steering system is the most important system for a vehicle, in terms of safety and driving feel. But in many cases, experiments to improve the steering feel using a real vehicle are very difficult in the aspects of repeatability, safety and money. Repeatability in testing steering systems is very important because the steering feel for a driver varies according to the environmental conditions. In addition to that, steering tests using vehicle are so dangerous that the driver might not concentrate on the tests. In this paper, a new steering system simulator using the front part of a steering and suspension system is described. This simulator allows cheap, safe, and repeatable testing of the steering system compared with the real vehicle test.

• Journal of Mechanical Science and Technology
• /
• 제19권3호
• /
• pp.792-801
• /
• 2005

This paper discusses a dc motor equipped electric power steering (EPS) system and demonstrates its advantages over a typical hydraulic power steering (HPS) system. The tire-road interaction torque at the steering tires is calculated using the 2 d.o.f. bicycle model, in other words by using a single-track model, which was verified with the J-turn test of a real vehicle. Because the detail parameters of a steering system are not easily acquired, a simple system is modeled here. In previous EPS systems, the assisting torque for the measured driving torque is developed as a boost curve similar to that of the HPS system. To improve steering stiffness and return-ability of the steering system, a third-order polynomial as a torque map is introduced and modified within the preferred driving torques researched by Bertollini. Using the torque map modification sufficiently improves the EPS system.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.923-929
• /
• 2001

Steering system is most important for vehicle in safety and driving feel. However, testing using real car to improve steering feel is often difficult in aspect to repeatability, safety and money. Repeatability in testing steering system is very important because steering feel for driver is variable according to the environment condition. And steering testing of vehicle is so dangerous that driver may not concentrate in testing. In this paper, the steering system simulator using front part of steering and suspension system was developed. We can test the electric power steering system for the light weight vehicle using this simulator cheap, safely and repeatably.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.103-110
• /
• 2017

Most commercial vehicles have adopted the hydraulic power steering system. To reduce fuel consumption and to improve steering controllability, a hybrid electric power steering system is being developed for commercial vehicles. In this study, the HILS (Hardware In the Loop Simulation) system equipped with a commercial vehicle hybrid electric power steering system was developed and the vehicle dynamic performance of a truck with the steering system was evaluated. The hybrid electric power steering system is composed of the EHPS motor pump, column mounted EPS system, and ball nut steering gear box for heavy commercial vehicles. The accuracy of vehicle models equipped with the HILS system was verified with comparisons between the simulation results and field test results. The road reaction forces of the steering system were generated from the vehicle model and verified using field test results. Step steering tests using the verified HILS system were carried out and the performance of a newly developed commercial vehicle hybrid electric power steering system was evaluated.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.444-451
• /
• 2005

The analysis of human arm motion during steering maneuver is carried out for investigation of man-machine interface of driver and steering system Each arm is modeled as interconnection of upper arm, lower arm, and hand by rotational joints that can properly represents permissible joint motion, and both arms are connected to a steering wheel through spring and damper at the contact points. The joint motion law during steering motion is determined through the measurement of each arm movement, and subsequent inverse kinematic analysis. Combining the joint motion law and inverse dynamic analysis, joint stiffness of arm is estimated. Arm dynamic analysis model for steering maneuver is setup, and is validated through the comparison with experimentally measured data, which shows relatively good agreement. To demonstrate the usefulness of the arm model, it is applied to study the effect of steering column angle on the steering motion.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.401-407
• /
• 2016

For high fuel economy, many kinds of unit in vehicle have been developed. In steering system, as a result, HPS(Hydraulic Power Steering) system has been replaced as EHPS and EPS system. But the structures of these systems are totally different, and that causes the uncertainty of fuel economy evaluation. Therefore we undertake to research to find results and tendency of fuel economy and energy in steering system. For accurate evaluation, we modeled different types of steering systems on same vehicle model. The simulation came into action on various driving cycle. The driving condition is designed to show standby power of pump. Results show differences of fuel efficiency and energy consumption.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1008-1013
• /
• 2012

EHPS는 탈엔진형 조향기술로 BLDC 모터를 통해 유압펌프를 작동시켜 조향력을 보조하는 동력 조향장치이다. EHPS는 BLDC 모터, 기어펌프 및 유압회로, 파워 스티어링 등으로 이루어진 전기전자, 유압 및 기계시스템의 복합적 시스템으로 모델링이 어렵다. 본 논문에서는 EHPS 시스템의 구성 부품을 수학적 모델링 하였고, AMESim을 이용하여 multi-domain 시스템의 시뮬레이션 모델을 구축하였다. 이를 활용한 다양한 시뮬레이션을 통해 개발 초기단계에서의 시행착오를 줄이고 완성도 높은 EHPS 개발 업무를 수행하는 데 도움을 줄 수 있을 것으로 사료된다.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1371-1376
• /
• 2008

A Steer-by-Wire system has so many advantages comparing with conventional mechanical steering system that it is expected to take key role in future environment friendly vehicle and intelligent transportation system. The mechanical connection between the hand wheel and the front axle will become obsolete. SBW system provides many benefits in terms of functionality, and at the same time present significant challenges - fault tolerant, fail safety - too. In this paper, failure analysis of SBW system will be performed and than sensor fusion technique will be proposed for fail safety of SBW system. A sensor fusion logic of steering angle sensor by using steering angle sensor, torque sensor and rack position sensor will be developed and simulated by fault injection simulation.

• Journal of Biosystems Engineering
• /
• 제30권6호통권113호
• /
• pp.327-332
• /
• 2005

In this study, the electronic power steering control system was developed and it was carried out to investigate experimentally the effect of the steering force for the on-road and off-road. The electronic power steering control system was engineered new trend system of power steering control system for tractor. It was composed of the electronic controller, detector, motor and mechanism mounted on tractor chassis. It was tested at the field in condition of tractor traveling speed 0 km/h, 3 km/h, 8 km/h, 11 km/h, 15 km/h, 18 km/h, 22 km/h, 25 km/h for measuring a maximum steering force. As a speed of tractor increased, a steering force decreased regardless of on-road or off-road. In addition, it is sufficiently a possibility of application of the steering system of tractor.