• Interaction and multiscale mechanics
• /
• 제2권2호
• /
• pp.189-207
• /
• 2009

Dynamics of the electric system for the toroidal drive under mechanical disturbance is presented. Using the method of perturbation, free vibrations of the electric system under mechanical disturbance are studied. The forced responses of the electric system to voltage excitation under mechanical disturbance are also presented. We show that as the time grows, the resonance vibration caused by voltage excitation still exists and the vibrations caused by mechanical disturbance are enlarged. The coupled resonance vibration caused by mechanical disturbance and voltage excitation is discussed. The conditions of the occurrence of coupled resonance are studied.

• 한국연소학회지
• /
• 제20권1호
• /
• pp.43-51
• /
• 2015

A study on laminar jet flames in coflow air diluted with helium has been conducted to investigate self-excitations for various propane mole fractions and nozzle exit velocities. The stability map was represented as a function of nozzle exit velocity and fuel mole fraction for propane. The results show that two types of self-excitation were observed : (1) buoyancy-driven self-excitation (hereafter called BDSE) and (2) Lewis-number induced-self-excitation coupled with (1) (hereafter called LCB) near extinction limit for 9.4 mm nozzle diameter. It was shown that with 0.95 mm nozzle diameter, Lewis-number-induced self-excitation (hereafter LISE) and BDSE could be separated. The differences between the two self-excitations were shown and discussed.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.97-104
• /
• 2003

The main objectives of this study are to examine the random responses of a vibration absorber system with autoparametric coupling in the neighborhood of internal resonance subjected to narrow band random excitation by Gaussian closure scheme and to compare the results with those obtained by Monte Carlo simulation. The Monte Carlo simulation is found to support the main features of the nonlinear modal interaction in the neighborhood of internal resonance conditions. The jump phenomenon of the cantilever mode and saturation phenomenon of the main system are shown to occur if the excitation bandwidth is sufficiently small.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.879-889
• /
• 2003

This research deals with the nonlinearities of rocking vibration associated with impact and sliding on the rocking behavior of rigid block under two dimensional sinusoidal excitation which has different frequencies in two excitation direction. The varied excitation direction influences not only the rocking response but also the sliding motion and the rocking response shape. Chaotic responses are observed in wider excitation amplitude region, when the frequencies in each excitation direction are different. The complex behavior of chaotic response, in the phase space, is related with the trajectory of base excitation and sliding motion.

• 한국연소학회지
• /
• 제19권2호
• /
• pp.21-27
• /
• 2014

Experimental study in laminar propane coflow jet flames has been conducted to investigate self-excitations. For various propane mole fractions and jet velocities, two types of self-excitation were observed: (1) buoyancydriven self-excitation (hereafter called BDSE) and (2) Lewis-number-induced self-excitation coupled with (1) (hereafter called LCB). The mechanism of Lewis-number-induced self-excitation (hereafter called LISE) is proposed. When the system $Damk\ddot{o}hler$ number was lowered, LISE was shown to be launched. The LISE is closely related to heat loss, such that it can be launched in even helium-diluted methane coflow-jet flame (Lewis number less than unity). Particularly, The LISE becomes significant as the $Damk\ddot{o}hler$ number decreases and heat-loss is excessively large.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.549-556
• /
• 2024

A serial pendulum dynamic vibration absorber (DVA) was designed to suppress the vibration of two degrees of freedom (Two-DOF) structure model. The optimal DVA parameters are selected using a genetic algorithm (GA) by minimizing the fitness function formulated from the system's frequency response function (FRF). Two fitness function criteria, using one and two target frequency ranges, were utilized to calculate the optimal DVA parameters. The optimized serial pendulum DVA parameters were used to reduce structural vibration under free and forced excitation conditions. The simulation study found that the serial pendulum DVA can effectively reduce the vibration response for a small excitation amplitude. However, the DVA performance decreases for a large excitation amplitude due to the nonlinearity of pendulum motion, and the percentage of vibration response attenuation is smaller than that obtained using a small excitation amplitude.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.603-609
• /
• 1999

The effect of an external acoustic excitation on the wake structure behind a circular cylinder was experimentally investigated. The sound wave was excited in the frequency range of the shear layer instability and two sound pressure levels of 114 and 120dB were used in this study. As a result, the acoustic excitation modified the wake structure by increasing the velocity fluctuation energy without changing the vortex shedding frequency. The acoustic excitation enhanced the vortex shedding process and promoted the shear layer instability. Consequently, the acoustic excitation reduced the length of the vortex formation region and decreased the base pressure. In addition, the vortex strength of vortices was increased and the width of the wake was spread out due to the acoustic excitation. When the excitation frequency was identical to the shear layer instability frequency, the effect of the external flow control on the cylinder wake was maximized. In addition, with increasing the sound pressure level, the effect of the external acoustic excitation on the wake structure increased.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2364-2375
• /
• 2018

Two-phase simultaneous excitation mode of the switched reluctance motor (SRM) has been shown to effectively improve the average torque output compared with traditional single-phase excitation mode. But the torque ripple of the two-phase excitation SRM with traditional winding distribution increases because of the inconsistent electromagnetic field. To reduce the torque ripple, a two-phase excitation 8/6 SRM with novel winding distribution is proposed in this paper. The static torques generated by various magnetic circuits are analyzed and obtained to verify the torque increase. Then the electromagnetic characteristics of the proposed SRM are investigated by the numerical calculation method in detail, including flux linkage, inductance, and torque. Finally, an experiment for measuring the SRM static electromagnetic characteristics and dynamic performance is designed and performed based on the novel mode, and the comparing results show that the proposed two-phase SRM is effective.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.48-53
• /
• 2005

본 연구의 목적은 기계적인 전단층 자극방법을 이용 스월제트 혼합향상의 가능성을 고찰함에 있다. 이를 위해 기계적 자극장치가 설계, 제작되었다. 주요 구성품으로는 두개의 아음속 노즐, 스월 발생기, 그리고 유동 자극기 등이다. 실험은 다음과 같은 다양한 헬리컬 모드들에서 수행되었다; m=+0, m=$\pm$1, m=$\pm$2, m=$\pm$3, m=$\pm$4. 열선유속계를 이용한 plane 파동과 헬리컬 파동 자극에 따른 제트속도 측정이 이루어 졌다. 다양한 헬리컬 모드에서의 결과 값들이 기준 값(plane-wave)과 비교되었다. 획득된 결과는 3-D mesh plot 과 2-D contour plot으로 표현되었다. 이로써 새로 고안된 장치는 헬리컬 불안정파 자극에 대한 효과를 입증하였고 또한 결과적으로 스월제트의 혼합을 증진시켰다.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.59-65
• /
• 2014

To obtain an elliptical trajectory at the cutting edge during elliptical vibration cutting, sinusoidal voltage excitations of two piezoelectric actuators have commonly been used. In this study, PWM excitation, which is relatively simple to generate, was employed and its characteristics were investigated. In experimental and analytical analyses, we found that for PWM excitation, the integer-multiple frequencies of the excitation voltage distorted the shape of the elliptical trajectory, whereas at a duty ratio(DR) of 50%, the distortion of the elliptical trajectory was minimized due to disappearance of the first overtone. When the magnitude of the maximum excitation voltage was maintained at the same level for both PWM and sinusoidal excitation, PWM (DR=50%) excitation produced a greater vibration amplitude than sinusoidal excitation but resulted in more rapid saturation of a high-frequency power amplifier.