• 한국음향학회지
• /
• 제41권6호
• /
• pp.680-690
• /
• 2022

일반적으로 배관에서 발생하는 진동은 배관을 파손시키는 문제를 넘어 배관 파손으로 유발되는 다른 위험한 문제의 원인이 된다. 배관 진동의 원인 분석과 이를 줄이기 위한 수많은 연구들이 존재하는데, 그 중 마찰 지지대를 이용한 배관 진동저감에 대한 연구가 소수 진행되고 있다. 하지만 마찰 지지대에 관한 연구들은 마찰 지지대 성능 예측과 평가에만 집중하였고, 지지대 설치 위치에 따라 달라지는 마찰 지지대의 효과는 고려하지 않았다. 따라서, 본 연구에서는 마찰 지지대의 설치 위치에 따른 배관 진동 저감 효과를 입증하고 전체 시스템의 진동을 줄이기 위한 마찰 지지대 위치 선정 방법을 제시한다. 설계단계에서 최적화 방법을 효과적으로 적용하기 위해 선형 해석으로만 마찰 지지대의 최적 위치를 예측하고, 설계된 마찰 지지대를 시간 영역 해석을 통해 방법론의 타당성을 입증하였다. 또한, 배관 시스템에서 마찰 지지대의 우수한 진동 저감 효과를 정량적으로 해석하여, 지지대 설치 위치를 예측하는 방법의 효용성을 증명하였다.

• 농업생명과학연구
• /
• 제50권2호
• /
• pp.187-194
• /
• 2016

본 연구는 무창돈사에서 최적 환경조절이 가능한 시스템을 구축하고자 환경조절이 가능한 모형돈사를 제작하여 온도분포특성을 분석하고 ICT 융합기술을 활용한 온도센서 위치 최적화 및 컨트롤 일체형 환기팬을 개발하고자 하였다. 팬 상부에 부착된 센서에 의해 측정된 온도는 다른 측점온도보다 1℃ 내의 낮은 온도차를 나타내어 측정오차를 고려할 때 온도센서가 팬 상부에 위치하여도 문제가 없을 것으로 판단되었다. 환기팬 성능은 최대 출력일 때 회전수 1920rpm, 송풍량 125㎥/min로 나타났으며, 최대 효율은 개방면적비 약 70%를 고려할 경우 사용된 환기팬의 적정 송풍량은 75㎥/min에 60pa로 나타났다. 댐퍼의 개방면적비가 약 70%일 때 환기팬의 동력과 상관없이 최대효율을 나타내었다. 팬의 출력별 회전수는 출력 100%일 때 최대 1,920rpm으로 나타났으며, 컨트롤러의 펄스 듀티비를 변화시킴에 따라 AC 출력 위상이 지연 없이 변화하는 것으로 나타나 빠른 응답속도로 팬 속도조절이 가능한 것으로 판단되었다.

• 자원리싸이클링
• /
• 제32권2호
• /
• pp.33-42
• /
• 2023

금속 에멀젼(metal emulsion)은 제강 공정의 효율성을 높이는 방법으로 수십 년 동안 연구되어 왔습니다. 본 연구는 육안으로 관찰하기 어려운 고온 실험의 단점을 보완하기 위해 상온에서 관찰 가능한 수모델을 이용하여 수행하였다. 슬래그 내 금속 에멀젼의 대신하여 증류수를 실리콘 오일에 적하하여 운동량 균형 방정식에 의한 계산 결과와 비교하는 실험을 하였다. 물방울의 하강 속도는 물방울의 직경과 유체(실리콘 오일)의 점도가 증가함에 따라 감소하였다. 교반 조건에서 실리콘 오일에서 물방울의 하강 속도를 시뮬레이션하기 위해 유체(실리콘 오일)의 유속을 입자 이미지 속도계(PIV) 방법으로 측정하였다. 물방울의 하강 속도 계산은 점성 실리콘 오일을 교반하거나 교반하지 않고 측정된 값과 잘 일치하였다.

• Computers and Concrete
• /
• 제31권2호
• /
• pp.111-121
• /
• 2023

The influence of material composition such as aggregate types, addition of supplementary cementitious materials as well as exposed temperature levels have significant impacts on concrete residual mechanical strength properties when exposed to elevated temperature. This study is based on data obtained from literature for fly ash blended concrete produced with natural and recycled concrete aggregates to efficiently develop prediction models for estimating its residual compressive strength after exposure to high temperatures. To achieve this, an extensive database that contains different mix proportions of fly ash blended concrete was gathered from published articles. The specific design variables considered were percentage replacement level of Recycled Concrete Aggregate (RCA) in the mix, fly ash content (FA), Water to Binder Ratio (W/B), and exposed Temperature level. Thereafter, a simplified mathematical equation for the prediction of concrete's residual compressive strength using Gene Expression Programming (GEP) was developed. The relative importance of each variable on the model outputs was also determined through global sensitivity analysis. The GEP model performance was validated using different statistical fitness formulas including R², MSE, RMSE, RAE, and MAE in which high R² values above 0.9 are obtained in both the training and validation phase. The low measured errors (e.g., mean square error and mean absolute error are in the range of 0.0160 - 0.0327 and 0.0912 - 0.1281 MPa, respectively) in the developed model also indicate high efficiency and accuracy of the model in predicting the residual compressive strength of fly ash blended concrete exposed to elevated temperatures.

• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.283-299
• /
• 2023

Structural stability of floating platforms has long since been a crucial issue in the field of marine engineering. Excessive motions would not only deteriorate the operating conditions but also seriously impact the safety, service life, and production efficiency. In recent decades, several control devices have been proposed to reduce unwanted motions, and an attractive one is the tuned heave plate (THP). However, the THP system may reduce or even lose its effectiveness when it is mistuned due to the shift of dominant wave frequency. In the present study, a novel adaptive tuned heave plate (ATHP) is proposed based on inerter by adjusting its inertance, which allows to overcome the limitation of the conventional THP and realize adaptations to the dominant wave frequencies in real time. Specifically, the analytical model of a representative semisubmersible platform (SSP) equipped with an ATHP is created, and the equations of motion are formulated accordingly. Two optimization strategies (i.e., J₁ and J₂ optimizations) are developed to determine the optimum design parameters of ATHP. The control effectiveness of the optimized ATHP is then examined in the frequency domain by comparing to those without control and controlled by the conventional THP. Moreover, parametric analyses are systematically performed to evaluate the influences of the pre-specified frequency ratio, damping ratio, heave plate sizes, peak periods and wave heights on the performance of ATHP. Furthermore, a Simulink model is also developed to examine the control performance of ATHP in the time domain. It is demonstrated that the proposed ATHP could adaptively adjust the optimum inertance-to-mass ratio by tracking the dominant wave frequencies in real time, and the proposed system shows better control performance than the conventional THP.

• 한국수소및신에너지학회논문집
• /
• 제33권2호
• /
• pp.148-157
• /
• 2022

Research on hydrogen storage is active to properly deal with hydrogen, which is considered a next-generation energy medium. In particular, research on metal hydride with excellent safety and energy efficiency has attracted attention, and among them, magnesium-based hydrogen storage alloys have been studied for a long time due to their high storage density, low cost, and abundance. However, Mg-based alloys require high temperature conditions due to strong binding enthalpy, and have many difficulties due to slow hydrogenation kinetics and reduction in hydrogen storage capacity due to oxidation, and various strategies have been proposed for this. This research manufactured Mg₂Ni to improve hydrogenation kinetics and synthesize about 5, 10, 20 wt% of CaF₂ as a catalyst for controlling oxidation. Mg₂NiHx-CaF₂ produced by hydrogen induced mechanical alloying analyzed hydrogenation kinetics through an automatic PCT measurement system under conditions of 423 K, 523 K, and 623 K. In addition, material life cycle assessment was conducted through Gabi software and CML 2001 and Eco-Indicator 99' methodology, and the environmental impact characteristics of the manufacturing process of the composites were analyzed. In conclusion, it was found that the effects of resource depletion (ARD) and fossil fuels had a higher burden than other impact categories.

• Tribology and Lubricants
• /
• 제39권5호
• /
• pp.183-189
• /
• 2023

A bearing is a mechanical component that transmits rotation and supports loads. According to the type of rotating mechanism, bearings are categorized into ball bearings and tapered roller bearings. Tapered roller bearings have higher load-bearing capabilities than ball bearings. They are used in applications where high loads need to be supported, such as wheel bearings for commercial vehicles and trucks, aircraft and high-speed trains, and heavy-duty spindles for heavy machinery. In recent times, the demand for reducing the driving friction torque in automobiles has been increasing owing to the CO₂ emission regulations and fuel efficiency requirements. Accordingly, the research on the driving friction torque of bearings has become more essential. Researchers have conducted various studies on the lubrication, friction, and contact in tapered roller bearings. Although researchers have conducted numerous studies on the friction in the lips and on roller misalignment and skew, studies considering the influence of roller shape, specifically roller shape errors including lips, are few. This study investigates the driving friction torque of tapered roller bearings considering roller geometric uncertainties. Initially, the study calculates the driving friction torque of tapered roller bearings when subjected to axial loads and compares it with experimental results. Additionally, it performs Monte Carlo simulations to evaluate the influence of roller geometric uncertainties (i.e., the effects of roller geometric deviations) on the driving friction torque of the bearings. It then analyzes the results of these simulations.

• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.487-502
• /
• 2023

In the realm of nanotechnology, the nonlocal strain gradient theory takes center stage as it scrutinizes the behavior of spinning cantilever nanobeams and nanotubes, pivotal components supporting various mechanical movements in sport structures. The dynamics of these structures have sparked debates within the scientific community, with some contending that nonlocal cantilever models fail to predict dynamic softening, while others propose that they can indeed exhibit stiffness softening characteristics. To address these disparities, this paper investigates the dynamic response of a nonlocal cantilever cylindrical beam under the influence of external discontinuous dynamic loads. The study employs four distinct models: the Euler-Bernoulli beam model, Timoshenko beam model, higher-order beam model, and a novel higher-order tube model. These models account for the effects of functionally graded materials (FGMs) in the radial tube direction, giving rise to nanotubes with varying properties. The Hamilton principle is employed to formulate the governing differential equations and precise boundary conditions. These equations are subsequently solved using the generalized differential quadrature element technique (GDQEM). This research not only advances our understanding of the dynamic behavior of nanotubes but also reveals the intriguing phenomena of both hardening and softening in the nonlocal parameter within cantilever nanostructures. Moreover, the findings hold promise for practical applications, including drug delivery, where the controlled vibrations of nanotubes can enhance the precision and efficiency of medication transport within the human body. By exploring the multifaceted characteristics of nanotubes, this study not only contributes to the design and manufacturing of rotating nanostructures but also offers insights into their potential role in revolutionizing drug delivery systems.

• 한국음향학회지
• /
• 제27권6호
• /
• pp.271-278
• /
• 2008

압전판의 길이나 폭에 따라 두께가 변화하는 압전 세라믹을 사용하여 광대역 특성을 구현하는 초음파 트랜스듀서에 대하여 압전진동자의 측면에서 본 형태에 따른 전기-음향적 특성해석을 이론적으로 수행하였다. 압전진동자의 길이방향에 따른 두께 변화를 지수함수의 조합으로 표현하고 이 함수를 이용하여 압전진동자의 전기단자에서 본 자유 어드미턴스 및 파워전달함수에 대한 식을 도출하였다. 대표적인 PZT압전 세라믹을 예로 들어 압전 진동자의 측면 형태변화에 따른 비 대역폭을 고찰해본 결과 넓은 대역폭를 얻기 위한 최적의 형태가 존재함을 알 수 있었으며, 압전진동자의 최대두께에 대한 최소두께 비가 자아짐에 따라 대역폭은 100%이상까지도 넓어질 수 있으나 파워전달함수는 반대로 감소하는 경향을 확인할 수 있었다. 또 압전진동자의 길이가 길어질수록 전달함수의 크기는 증가하나 광대역 특성을 갖는 압전진동자의 형태는 매우 한정적이 됨을 확인할 수 있었으며 이는 고효율의 광대역 초음파 트렌스듀서 제작에 있어서는 정밀한 가공이 요구됨을 확인할 수 있었다.

• Steel and Composite Structures
• /
• 제50권3호
• /
• pp.319-336
• /
• 2024

Ultra-high-performance concrete (UHPC) has attracted increasing attention in prefabricated steel-concrete composite beams as achieving the onsite construction time savings and structural performance improvement. The inferior replacement and removal efficiency of conventional prefabricated steel-UHPC composite beams (PSUCBs) has thwarted its sustainable applications because of the widely used welded-connectors. Single embedded nut bolted shear connectors (SENBs) have recently introduced as an attempt to enhance demountability of PSUCBs. An in-depth exploration of the mechanical behavior of SENBs in UHPC is necessary to evidence feasibilities of corresponding PSUCBs. However, existing research has been limited to SENB arrangement impacts and lacked considerations on SENB geometric configuration counterparts. To this end, this paper performed twenty push-out tests and theoretical analyses on the shear performance and design recommendation of SENBs. Key test parameters comprised the diameter and grade of SENBs, degree and sequence of pretension, concrete casting method and connector type. Test results indicated that both diameters and grades of bolts exerted remarkable impacts on the SENB shear performance with respect to the shear and frictional responses. Also, there was limited influence of the bolt preload degrees on the shear capacity and ductility of SENBs, but non-negligible contributions to their corresponding frictional resistance and initial shear stiffness. Moreover, inverse pretension sequences or monolithic cast slabs presented slight improvements in the ultimate shear and slip capacity. Finally, design-oriented models with higher accuracy were introduced for predictions of the ultimate shear resistance and load-slip relationship of SENBs in PSUCBs.