• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.515-522
• /
• 2020

This study examined the effect of the blend ratio of wool and polyester fibers, yarn and fabric structural parameters to the appearance property and the formability of worsted fabrics. The mechanical properties of twenty types of manufactured worsted and PET/wool blend fabrics were measured using KES-FB and FAST systems. Garment formability increases with the thickness and cover factor as well as increases with wool content. The correlation between KES-FB and FAST system showed a relatively high correlation with an extensibility of 0.98, bending and shear rigidity 0.71; both were higher than polyester synthetic fiber. The correlation coefficient of garment formability between KES-FB and FAST systems was 0.93 and the correlation coefficient between formability and fabric extensibility was 0.8. These results were higher than those of bending and shear rigidity. This revealed that garment formability was influenced by wool content, cover factor and fabric thickness; however, wool content and fabric thickness were the most important factors for the seam pucker. The garment formability of the worsted fabrics can be predicted by fabric mechanical properties measured from KES-FB and FAST systems.

• Structural Engineering and Mechanics
• /
• 제44권4호
• /
• pp.521-538
• /
• 2012

In this study, the transverse vibrations of an axially moving flexible beams resting on multiple supports are investigated. The time-dependent velocity is assumed to vary harmonically about a constant mean velocity. Simple-simple, fixed-fixed, simple-simple-simple and fixed-simple-fixed boundary conditions are considered. The equation of motion becomes independent from geometry and material properties and boundary conditions, since equation is expressed in terms of dimensionless quantities. Then the equation is obtained by assuming small flexural rigidity. For this case, the fourth order spatial derivative multiplies a small parameter; the mathematical model converts to a boundary layer type of problem. Perturbation techniques (The Method of Multiple Scales and The Method of Matched Asymptotic Expansions) are applied to the equation of motion to obtain approximate analytical solutions. Outer expansion solution is obtained by using MMS (The Method of Multiple Scales) and it is observed that this solution does not satisfy the boundary conditions for moment and incline. In order to eliminate this problem, inner solutions are obtained by employing a second expansion near the both ends of the flexible beam. Then the outer and the inner expansion solutions are combined to obtain composite solution which approximately satisfying all the boundary conditions. Effects of axial speed and flexural rigidity on first and second natural frequency of system are investigated. And obtained results are compared with older studies.

• 미래기술융합논문지
• /
• 제2권2호
• /
• pp.9-14
• /
• 2023

이 연구는 1050MPa급 경량 연성 주철 주관류 컨트롤 암을 개발하기 위한 첫 해의 결과를 보여줍니다. 첫째, 최적 설계 구조를 위한 레이아웃 설계 및 구성 요소 개발, 그리고 컨트롤 암 강성과 최적 구조 디자인 및 강건성 설계를 통해 예상 응력을 제어하는 중점 영역의 강건성을 달성합니다. 둘째, 높은 강성과 고성능 경량 구조를 반영하는 컨트롤 암을 개발합니다. 중공을 통해 소비자가 요구하는 설계와 강성을 충족시키기 위해 개발된 컨트롤 암은 코어 제작 공정을 개발합니다. 셋째, 최적의 합금 조성과 열처리 방법을 통해 철 합금 (Cu, Ni, Mo)의 양과 Austempered 열처리 및 조화 상태를 도출합니다. 넷째, 저강도, 고강성 구성 요소 개발을 위해 최적의 성형기술 개발을 통해 최적의 주조 기술 개발로 이어지는 구성 요소 개발을 위한 높은 강도의 주조 형성 기술을 개발하기 위한 시도를 합니다.

• 한국의류학회지
• /
• 제22권8호
• /
• pp.1079-1089
• /
• 1998

Various fabrics, including natural fibers, regenerated cellulosic fibers, synthetic fibers, blend yarn, and mixture fabrics, were treated with the solutions of high purity chitosan in 1% acetic acid, having high viscosity of 930cps or low viscosity of 8cps. Physical/ mechanical properties of the treated fabrics samples were measured using Kawabata Evaluation System and drape tester. From these, hand values and total hand values of the fabric samples were calculated using Kawabata-Niwa translation equations. KOSHI, SHARI, HARI values have increased for the treated samples, while FUKURAMI values have decreased in general.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.728-733
• /
• 2001

The subject of this paper is to perform the basic research to make design guide as finding out the structural characteristics of polypropylene Ankle Foot Orthosis(AFO) for hemiplegics. Target shape of AFO is a solid standard type. In this study we measure ridity as dorsiflexion and thicknesses of AFO with three types of ankle widths and analyze correlation between rigidity and ankle widths, thicknesses. As a result, the rigidity characteristic is specified complex effect of ankle widths and thicknesses.

• Journal of Biosystems Engineering
• /
• 제27권4호
• /
• pp.283-292
• /
• 2002

Mechanical and physical properties of various parts of jujube (Zizyphus jojoba Miller) such as fruits, leaves, secondary branches, and leafy stems were measured and analyzed. The physical dimensions of the fruits were measured using a digital caliper, and the detachment force of the fruit and leafy stems was measured using a force gauge. The physical characteristics of the secondary branches such as the modulus of elasticity and the torsional rigidity were tested using a universal testing machine (UTM). The physical characteristics of leafy stems such as length and weight were also measured using a digital caliper and a digital scale, respectively. The detachment force of leafy stems and the area of the leaf also measured. The terminal velocities of the jujube fruits, leaves, and leafy stems were measured using a custom made terminal velocity experiment system. Diameter of the major and minor axis of the jujube fruit, weight of the fruit, and detachment force of the fruit stem was average of 32.02 mm, 23.92 mm. 10.0 ${\times}$ 10$\^$6/ ㎥, 8.99 g, and 5.43 N. respectively. The detachment forces of the jujube fruits increased and the force-to-weight ratio of the jujube fruits decreased as the weight of the jujube fruits increased. The modulus of elasticity of the secondary branches of the jujube was average of 7.01 ${\times}$ 10$\^$8/ N/㎡ and decreased as diameter of the secondary branches increased. The average torsional rigidity of the secondary jujube branches was 5.2 ${\times}$ 10$\^$-/ N/㎡, and the torsional rigidity decreased as the secondary branch diameter increased. The distribution of the torsional rigidity data associated with the diameter of the branches, however. widely scattered and it was difficult to find any relationship between the diameter of the branches and the torsional rigidity of tile branches. The weight of the leafy stems, number of loaves attached to the leafy stems, diameter of the stem side of the leafy stems, diameter of the leafy stem end was average or 0.7 g, 6.6 ea, 12.2 cm, 4.5 mm, and 2.7 mm, respectively. The major and minor axis of the .jujube loaves, area of leaves, weight of the leaves. and detachment force of the leaves was average of 5.7 cm, 3.3 cm, 12.98 cm$^2$, 0.20 g, and 4.39 N, respectively. The terminal velocity of the .jujube fruits increased as the weight of the fruits increased. The terminal velocity of the leafy stems, however, did not show a relationship with the weight of the leafy stems and the number of leaves attached to the leafy stem. The terminal velocity, however, slightly increased as the length of the leafy stems increased.

• 한국가시화정보학회지
• /
• 제17권2호
• /
• pp.17-24
• /
• 2019

The purpose of this study is to study the fluid-dynamic and structural characteristics of the conventional greenhouse and to find possible improvement on the current greenhouse. The greenhouse is required to have enough rigidity of the structure while the installation and reinforcement should be as easy as possible. In this study, the structural stability to the snow load was tested through the computational structure analysis based on the building structure standard, and the wind load was computed by computational fluid-structure interaction analysis. The current analysis can be used as a reference data for a new greenhouse and it will be economically viable by reducing installation and maintenance costs.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.49-58
• /
• 2006

The purpose of this study was to examine the effect of covering yarn's twist on mechanical properties of knitted fabrics of composite yarns with single covering process. Four yarns that were used in this study: two different composite yarns made from the four kinds of cotton and functional polyester-(Poly-A) with the ratio of 52:48, and the rest two yarns are the original cotton 100% yarn and the poly-A 100% yarn. The two kinds of composite yarns, CP1 and CP2, were processed on the single covering process. CP1 was applied on the single covering process with S-800 tpm, where Poly-A was used as covering yarn and cotton was used as core yarn. CP2 was applied on the same process as CP1 except that Poly-A had been applied on the two-for-one twisting process with S-400 tpm on the previous step. Sixteen mechanical properties of all the four knifed fabrics knitted under the same knitting conditions were measured by KES-FB system with the outer knit condition. And 3D CAD dressmaking simulations, which were driven by some of the mechanical properties, were presented. The results were as follows: CP2 had high RT values with twisting of covering yarn. CP2 also had high B, 2HB values because of higher linear density. SMD was affected rather by twisting of covering yarn than by fine hair of the cotton surface. Twisting of covering yarn made it decreasing T value and increasing W value. Dressmaking 3D CAD simulations showed that there are buckling effects on CP2 because of high bending rigidity and shear rigidity.

• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.195-204
• /
• 2024

The study involves a finite element analysis to evaluate the structural integrity of the neck mount block for a type 4 hydrogen storage vessel, with the aim of enhancing its strength and rigidity. The existing neck mount block consists of a fixed part and a sliding part, each comprising a body block for load support, a screw part for neck boss fixation, and bolts. To analyze the vulnerabilities of the neck mount block under bolt fastening and load conditions relative to vehicle travel directions, a structural analysis process was developed. Comparative analysis between the enhanced design and the existing model was performed, resulting in improved strength and rigidity. The objective is to provide guidance for the current product development and to offer fundamental data for the design and structural analysis of future development projects.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.328-335
• /
• 2005

For high speed railway vehicles, we consider a vibration of flexible track/wheel system. It is very important to deal with the complex phenomena of high-speed vehicles that can be occurred in the vertical vibration of the system. From a viewpoint of multibody dynamics, this kind of problem needs accurate analysis because the system includes mutual dynamic behaviors of rigid body and flexible body. The simulation technique for the complex problems is also discussed. We consider the high-speed translation, rail elasticity, elastic supports under the rail and contact rigidity. Eigen value analysis is also completed to verify the mechanism of the coupled vertical vibration of the system.