• Applied Biological Chemistry
• /
• v.42 no.4
• /
• pp.317-323
• /
• 1999

Immature plums(Prunus salicina L.) were coated with edible coatings, calcium-added methyl cellulose(CaMC) and hydroxy propyl methyl cellulose-15(CaHPMC-15). Weight loss and respiration rate of immature plums coated with CaMC and CaHPMC-15 were lower only at the earlier storage period. The titratable acidity of plums was decreased and pH was increased during storage, Soluble pectin, pectinesterase, and polygalacturonase activity as the marker of softening were commonly increased with storage time, but those increases were lower in CaMC and CaHPMC-15-coated plums. Mechanical firmness became significantly soft during storage, while the coated plums were remained harder. As a result of sensory evaluation, softening of plum tissue was found during storage, but the coated plums had the harder texture. These data suggest that the application of CaMC or CaHPMC-15 coatings into immature plums can reduce the postharvest softening during storage.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.132-137
• /
• 2011

In the present investigation, thermal aging behavior of H-NBR/NBR blend with various H-NBR content was investigated. Mixture of dicumyl peroxide and sulfur were used as a curing agent. The influence of the thermal aging of the H-NBR/NBR blends on the solid state properties such as tensile strength, elongation at break, hardness and abrasion resistance was investigated. Tensile strength was increased with increasing H-NBR content, while abrasion resistance was decreased. Both elongation at break and hardness were not affected by the addition of H-NBR. The properties such as hardness, tensile strength and elongation at break of the aged samples were lower than unaged samples. However, the rate of deterioration of those properties was decreased by increasing the H-NBR content, which indicated that improved thermal aging behavior was obtained by the addition of H-NBR. Abrasion loss was increased with increasing aging time, but it became less by the addition of H-NBR addition.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.393-398
• /
• 2013

Two types of polymeric micro-needles with 250 and $750{\mu}m$ lengths were prepared by a micromolding process. The geometry of dissolving micro-needles with minoxidil was investigated and the mechanical property of polymer micro-needles was also evaluated. Water dissolving micro-needles containing minoxidil were successfully inserted into skin and delivered minoxidil to the skin layer after 30 min of insertion. The observed hair growth was less when the minoxidil treatment was not applied or used without the micro-needles than that the minoxidil was applied by micro-needles. Histologically, these hair follicles became bigger, and the hair papillae were totally encircled by the hair bulbs. In this feasibility test, we show the successful delivery of minoxidil, and effective treatment of hair loss can be possible by using dissolving micro-needles with minoxidil.

• Korean Journal of Weed Science
• /
• v.12 no.3
• /
• pp.230-260
• /
• 1992

The paper was reviewed the research results on weed dynamics and effective control methods in direct-seeded rice crop. Direct seeding method resulted in drastic increment of weed growth compared to transplanting method and also changed in troublesome weed flora. Two to three fold more weeds were harvested at the direct seeded rice and weed flora of dominant species shifted toward $C_4$type grass weeds. Some of the important troublesome weeds in direct seeded rice were Echinochloa crus-galle, Oryza saliva ssp spontanea, Leptochloa chinensis. Setaria viridus. Digitaria adsendens, Sesbania exaltata, Aeschynomene indica, Algae, etc. Yield loss due to weed competiton was about 40-60% for water-seeded and about 70-100% for dry-seeded rice while these for transplanted rice were about 25-35% for mechanical transplanting and about 10-20% for manual transplanting, respectively. Integrated weed management concept was neede to approach weed control effectively. Several cultural technologies were very effective to suppress the weed growth. These were tillage operation, water management, seeding date and seeding rate. Crop residues of barley, rice, wheat, oat and italian ryegrass were also effectivly suppressed the paddy weeds particularly to Potamogeton distiuctus, a perennial broadleaf weed. A pathogen of Epicoccosorus nematosporus identified from Eleocharis kuroguwai was an excellent potential bioagent to control the most troublesome perennial sedge weed of E. Kuroguwai without arising any detrimental effect. The herbicidal efficacy of this pathogen was as high as bentazon herbicide. Plant growth regulator of paclobutrazol (pp-333) was another possible alternative to reduce the herbicide use. In current, herbicide exhibited the most conspicuous results to control weeds in direct-seeded rice even though the application technologies were not fully established. Recommendations for herbicide application were suggested for in both water-and dry-seeded rice in USA, Japan and Korea, respectively. To make better and comprehensive recommendations further studies on weed ecology and herbicide development were emphasized.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.105-110
• /
• 2007

We have built the millimeter-wave passive imaging system with a lens and mechanical scan antenna. The lens was designed based on optical theory in order to focus millimeter-wane. A full image was taken from image points scanned by Placing antenna at the representative focal plane selectively. An integrated antenna array device for low-loss and low-noise with the array of 4 by 1, where components such as antenna, balun, MMIC, and detector were assembled on a sin91e substrate, and a fermi tapered slot antenna with high-gain and low-side lobe were used for elements of this millimeter-wave passive imaging system. Two dimensional antenna arrangement on focal plane was achieved in this imaging system.

• Journal of the Korean Ceramic Society
• /
• v.52 no.1
• /
• pp.77-82
• /
• 2015

The effect of the electrode type on the dielectric and piezoelectric properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbZrO_3-PbTiO_3$ (PMN-PZT) single crystals was investigated in an effort to improve their properties for various piezoelectric applications. First, three different types of PMN-PZT single crystals [PMN-PZT-A (piezoelectrically soft type; dielectric constant ~ 10,000), PMN-PZT-B (piezoelectrically soft type; phase-transition temperature between the rhombohedral and tetragonal phases ($T_{RT}$) ~ $145^{\circ}C$), PMN-PZT-C (piezoelectrically hard type; high mechanical quality factor ($Q_m$) ~ 1,000)] were fabricated using the solid-state single crystal growth (SSCG) method. Then, four different types of electrodes [sputtered Au, sputtered Cr/Au, sputtered Ti/Au, and fired Ag] were formed on the single crystals, and their dielectric and piezoelectric properties were measured. The single crystals with a sputtered Ti/Au electrode showed the highest dielectric and piezoelectric constants but the lowest coercive electric field ($E_C$). The single crystals with a fired Ag electrode showed the lowest dielectric and piezoelectric constants but the highest coercive electric field ($E_C$). This dependence on the type of electrode was most significant in the piezoelectrically hard PMN-PZT-C single crystals. However, the effects of the electrode type on the phase transition temperatures ($T_C$, $T_{RT}$) and dielectric loss were negligible. These results clearly demonstrate that it is important to select an appropriate electrode so as to maximize the dielectric and piezoelectric properties of single crystals in each type of piezoelectric application.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.580-585
• /
• 2009

Harmful Algal Blooms (HABs), caused by Cochlodinium polykrikoides that causative fishery mortality, impact on aquaculture and economic loss appear particularly in summer and fall seasons in the Korean seas. It was studied on characteristics of HABs in the South Sea of Korea by using satellite and in-situ data. The in-situ data encompassed oceanic and meteorological data from July to October 2002-2008 and satellite data from July to October 2002-2006. Chlorophyll concentrations were calculated using Seaviewing Wide Field-of-view Sensor images by an Ocean Color (OC4) algorithm, and HABs were estimated using the Red tide index Chlorophyll Algorithm (RCA). The HAB occurrences were dominant when water temperature was $22.6-28^{\circ}C$ in August. The frequency of the individual numbers during 2002-2008, the HABs more than 1000 cells/ml (alert condition), were 73.57 %. In meteorological data from July to September during 2002-2008, the average precipitation, the mean air temperature, the mean wind speed and direction, and the sunshine were 9.31 mm/day, $24.07^{\circ}C$, 2.34 m/s and easterly, and 1-11 h, respectively. Our results suggest that the upwelling is caused by southwesterly wind in summer season and the Tsushima Warm Current which have influenced on the dispersion and moving of HAB (chlorophyll). In addition, the fresh water from Nakdong River, as the source of nutrients, also influences the occurrence of HABs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.298-304
• /
• 2009

The effect of the surface treatments on the high temperature properties of the Inconel 617, one of the promising candidate alloys for high temperature heat-transport system, has been studied. Various surface modification methods including a rapid thermal process(RTP), a hydrothermal treatment, and a physical vapor deposition($2{\mu}m$ thick TiAlN film by an arc discharge) were applied to the Inconel 617. The morphological and the structural properties of the surface-modified Inconel 617 samples after heat treatment at $1000^{\circ}C$ in the air were compared to find out whether inhomogeneous formation of $Cr_2O_3$ crust at the surface region was suppressed or not. TiAlN-coated Inconel 617 showed homogeneous microstructure and the lowest wear loss compared to bare, RTP- and hydrothermally-treated Inconel 617 by suppressing the $Cr_2O_3$ crust formation.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.63-68
• /
• 2011

The investigation is directed to lead free (Pb-free) frits that can be used for organic light emitting diode, plasma display screen devices and other sealing materials. $P_2O_5$-SnO system glasses have been prepared for Pb-free low temperature glass frit. Structure and properties of the glasses with the composition SnO-$xB_2O_3-(60-x)P_2O_5$ (x=0, 5, 10, 15, 20, 25, 30, 35, 40 mol%) were characterized by infrared spectra (IR), X-ray diffraction(XRD), Density, Molar volume, Thermo mechanical analysis(TMA) and weight loss after immersion test. Glass transition temperature($T_g$), dilatometric softening temperature($T_d$) and chemical durability increased, and coefficient of thermal expansion($\alpha$) decrease with the substitution of $B_2O_3$ for $P_2O_5$ in the range of 0~25 mol%.

• Journal of the Korea Concrete Institute
• /
• v.14 no.2
• /
• pp.249-256
• /
• 2002

High performance concrete is prone to large autogenous shrinkage due to its low water to binder ratio (W/B). The autogenous shrinkage of concrete is caused by self-desiccation as a result of water consumption by the hydration of cement. In this study, the autogenous shrinkage of high performance concrete with and without fly ash was Investigated. The properties of fresh concrete, slump loss, air content, and flowability as well as the mechanical properties, compressive strength and modulus of elasticity, were also measured. Test results was shown that the autogenous shrinkage of concrete increased as the W/B decreased. For the same W/B, the autogenous shrinkage of high strength concrete with fly ash was considerably reduced although the development of its compressive strength was delayed at early ages. Furthermore, the autogenous shrinkage and compressive strength of high strength concrete were more rapidly developed than those of normal strength concrete. It was concluded that fly ash could improve the quality of high strength concrete with respect to the workability and autogenous shrinkage.