• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1841-1844
• /
• 2004

'Mixing Index($D_I$)'s generally used to measure the degree of mixing. A new method to calculate $D_I$ was proposed, when insoluble solution flows in micromixer. 'Vortex Index (${\Omega}_I$)'which indicate the degree of chaotic advection, is defined and formulated. A lots of arbitrary shaped microchannels were tested to calculate the $D_I$ and ${\Omega}_I$. And then a simple algebraic equation, $D_I=A{\Omega}_I+B$, was obtained. This equation may be used instead of partial differential equation, concentration equation.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2460-2464
• /
• 2008

The present paper suggests new method to know the effects of molecular diffusion and the helicity of microchannel flows on mixing in passive micromixers, which are essential components of a microfluidic chip. In this study, 'Helix Index' is newly defined as the magnitude of chaotic advection. Relationship between Helix Index and Mixing Index is analyzed numerically such as the wide range of Peclet and Reynolds numbers in three dimensional serpentine microchannel when using soluble solutions (water/glycerol). As a result, a simple algebraic equation is derived by this relationship based on a regression analysis. The algebraic equation is found to be able to accurately predict the mixing performance without solving the coupled, complex momentum and mass transfer equations.

• International journal of steel structures
• /
• v.18 no.5
• /
• pp.1710-1722
• /
• 2018

Investigating remained damages from terrible earthquakes, it could be concluded that some events including explosion because of defect and failure in the building mechanical facilities or caused by gas leak, firing, aftershocks, etc., which are occurred during or a few time after the earthquake, will increase the effects of damages. In this paper, by introducing a complete risk analysis which included direct and indirect risks for earthquake (the main shock) and aftershock, the corresponding robustness index was created that called as "robustness index sequential critical events risk-based". One of the main properties of the intended robustness index is using progressive collapse percentage in its evaluation. Then, in a numerical example for a 4-storey moment resisting steel frame structure, a method is presented for obtaining all effective parameters in robustness index evaluation based on the intended risk and at last its results were reported.

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.188-188
• /
• 2007

• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.631-646
• /
• 1998

The purpose of this study was to access the clinical effects of C31G, Listerine and CPC on the earlyx periodontitis when they were used as a adjunctives to the mechanical plaque control. Each groups were composed of 12 patients and in three test groups, C31G(Exp 1 group), Listerine(Exp 2 group) and CPC mouthrinse(Exp 3 group) were used three times a day. and as a control, placebo solution was used. Plaque index, gingival index, bleeding index, pocket depth and loss of attachment were measured as clinical parameters. After scaling and oral hygiene instruction, root planing is done two weeks later. During the eight weeks of experimental period, mouth gargling is done by all groups. The changes in the clinical parameters of the all sites were monitored every two weeks. The results were as follows : 1. The plaque index showed a siginificant difference in Exp 1 group compared with test 2 group after 2 weeks use of mouth rinse(P<0.05). 2. The gingival index showed a significant difference in Exp 1 group compared with baseline value(P<0.05) but there was no significant difference between the groups after 2 weeks use of mouthrinse (P<0.05). 3. The plaque index, gingival index and bleeding index showed a significant difference in all groups compared with baseline value after 4 weeks of root planing and mouthrinse use(P<0.05). but there was no significant difference between the groups(P<0.05). 4. Periodontal pocket depth showed a significant difference in all groups compared with baseline value after 4 weeks of root planing and mouthrinse use(P<0.05). and there was significant difference between the Exp 1 group and control group(P<0.05). 5. Loss of attachment showed a significant difference in all Exp groups compared with baseline value after 4 weeks of root planing and mouthrinse use(P<0.05). and there was significant difference between the Exp 1 group and control group(P<0.05). The results suggest that C31G, Listerine and CPC were effective for early periodontitis as a adjunctive to mechanical plaqe control.

• Composites Research
• /
• v.30 no.4
• /
• pp.229-234
• /
• 2017

Generally, joints are the weakest part in the composite structures. Composite joints can be classified into adhesive joints and mechanical joints, and mechanical joints are mainly used in areas less sensitive to environmental conditions. In this paper, the failure loads of composite mechanical joints with five different stacking angles are tested and predicted. Finite element analysis of mechanical joints were performed and failure loads were predicted by the FAI(Failure Area Index) method using Tsai-Wu and Yamada-Sun failure criteria, and the predicted failure loads were compared with experimental results. From the experiment and analysis, the failure loads of the mechanical joints were decreased as the ratio of 0 degree layer was low and they could be predicted within 13.03% using the FAI method and Yamada-Sun failure criteria.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.2
• /
• pp.108-116
• /
• 2014

With the increasing the importance of emotional quality of vehicle, the sound quality of systems with electric motor components has become increasingly important. Electric motors are used for windows, seats, sun roof, mirrors, steering columns, windshield wiper and climate control blowers, etc. In this paper, a study was conducted to identify sound quality factors that contribute to customer's satisfaction and preference of the window lift system. Jury test for subjective evaluation was carried out and sound quality index was developed. Averaged sound pressure level and sharpness were significant factors when glass moves down. Also, maximum loudness at stop section and averaged loudness were significant factor when glass moves up. Next, noise source identification was carried out using beam forming method during glass transferred section and impulsive noise at stop section. Several improvement methods were applied using the source identification result. And finally, the degree of sound quality improvement was judged using sound quality index.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.499-504
• /
• 2010

It is important to determine the exact soot mass in a DPF system in order to control the timing of PM regeneration. The soot mass accumulated in a filter can be estimated from the pressure drop in the filter and the exhaust gas flow rates. In this study, the soot index is defined as the pressure drop in the DPF divided by the pressure drop in a DOC. An effective signal processing method for determining the soot index is proposed; the results yielded by this method indicate good correlation between the soot index and the amount of soot loaded into the filter for both steady-state and transient-state operating conditions in a 3L diesel engine for passenger vehicles.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.11
• /
• pp.1113-1120
• /
• 2012

This paper deals with the analysis of interior noise and low frequency noise characteristic for the Busan citizens to use public transport, Busan Metro Line 3. The interior noise evaluation index, articulation index(AI) is evaluated the lower value about average 22 % in a whole range, this is difficult to have a conversation. Also, noise criteria(NC) curve is partially evaluated as NC-65 below 2000 Hz, space type is evaluated as factories. Another of interior noise evaluation index, preferred speech interference level(PSIL) is evaluated the upper value about average 66 dB(A) in a whole range, this is evaluated to be interrupted. In the case of low frequency noise(20~200 Hz), the measurement of low frequency noise is assessed largely beyond noise criteria of ISO 226. The low frequency noise should be reduced because low frequency noise affects on psychological stress and displeasure although low frequency noise is not recognized by auditory sense. The low frequency noise criteria and guideline will be enacted from now on in Korea.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.629-639
• /
• 2016

Batch process TRN(Terrain Relative Navigation) using an altimeter is a technique to correct position by correlating a series of periodically measured terrain height profile and terrain height candidate profile of the DEM(Digital Elevation Map). However, it is generally known that the performance of TRN is degraded when measured terrain height profile and terrain height candidate profiles of the DEM are similar at hill or repetitive terrain. In this paper, area based terrain slope roughness index[11] is applied and area based terrain curvature roughness index which can detect similarity of terrain in ROI(Region Of Interest) is proposed to overcome this problem. Applying terrain roughness indexes to terrain relative navigation system of lunar lander, it is shown that TRN using area based terrain roughness results in improved performance compared to conventional trajectory based method through simulation.