• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.259-264
• /
• 2001

This paper presents impact factors of domestic journals in mechanical engineering area to present an objective data for journal evaluation. For this purpose, reference data of 47 Korean journals are databased and analyzed. From the developed database, impact factor, immediacy index and self citation index are calculated.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.2057-2066
• /
• 1996

^In this paper, diagnostic technique for detecting the engine faults, especially misfire, are introduced and compared with each other under the same conditions. With all of them the instantaneous angular velocitys, measured at the flywheel, were analyzed. The techniques include the frequency analysis, auto-correlation function, velocity index, acceleration index, maximum acceleration index, and integrated torque index. Since the main driving components for the angular velocity fluctuation are both the pressure and the inertia torque, the component of the inertia torque in it must be excluded to extract the information of the combustion from the angular velocity. To do this, it is required to consider only the first half of the combustion period in the angular velocity fluctuations, which has never been proposed in the existing methods. On the basis of this fact, the results show that the most effective diagnostic technique is maximum acceleration index.

• 제어로봇시스템학회논문지
• /
• 제21권3호
• /
• pp.210-216
• /
• 2015

This paper proposes a method to determine vehicle driving state using the driving characteristics index. This index is a quantitative value to classify the driving state of a vehicle with its velocity and heading angle in that instant. It can classify driving state into straight driving, lane changing driving and curve driving in real time. In addition, the number of positional information is movably set up by designed region of interest. The proposed index is expressed on the stable driving states. Each driving state has characteristic tendency, and is compared with index distributional areas. The proposed method is verified by the actual driving experiment on the KATECH proving ground.

• 한국정밀공학회지
• /
• 제28권7호
• /
• pp.859-865
• /
• 2011

A bio-check unit and health index were developed to provide information on personal health state with easily available noninvasive measurements and surveys. Four health indices were defined such as cardiovascular index, stress index, obesity index, and management index. Methods were developed to calculate health index scores from measured physiological signals and answer of survey questions. In order to evaluate effectiveness of the health indices, a clinical trial was conducted for 362 persons who visited general hospital for annual health inspection. The cardiovascular index showed a good correlation coefficient of 0.685 with the cardiovascular health graded by a medical doctor. The stress index showed a good correlation coefficient of 0.638 with the results of stress questionnaires being used in the public health center. Once the health index function is added in the bio-check unit, the unit may provide useful contents for personal health management.

• 한국기계가공학회지
• /
• 제21권8호
• /
• pp.60-65
• /
• 2022

This study focuses on the driving control design of an index, which is a key component of a rotary transfer machine that is effective in improving productivity and reducing manufacturing costs by shortening cycle time. Although various index studies have been conducted on the rotation of workpieces such as general-purpose machine tools and tilting indices, the development of an index for rotary transfer machines for transfer is insufficient. The index consists of a body, table, hydraulic cylinder, motor, reducer, and curved coupling. The torque of the table for driving was selected, and the angular velocity and torque pattern were simulated using the motor manufacturer's program. The specifications of the drive motor were determined based on the selected torque.

• 한국강구조학회 논문집
• /
• 제15권2호
• /
• pp.147-157
• /
• 2003

최소유지관리의 LCC관점에서 강구조물에의 적용이 증가하고 있는 내후성강재를 대상으로 Mill Sheet를 수집하고 이를 통계적으로 분석하여 화학성분, 기계적성질, 용접성지수, Weathering Index 및 충격흡수에너지에 대해 정량적으로 조사하였다. 본 연구결과 국내에서 생산되고 있는 내후성강재의 화학성분, 기계적 성질 및 충격흡수에너지는 분산의 폭이 약간 크게 나타났으며 KS에서 규정하는 기준값을 충분히 만족하고 있는 것으로 나타났다. 또, 용접성지수 및 Weathering Index는 일본 도로교시방서 및 ASTM의 기준을 만족하고 있는 것으로부터 국내 내후성강재의 품질을 확인 할 수 있었다.

• 설비공학논문집
• /
• 제19권8호
• /
• pp.599-606
• /
• 2007

An experimental study was performed to measure a ice concentration of ice slurry flowing in a pipe in a real time. In the present paper, we suggested a measuring method by a refractive index and compared it to other methods by a freezing point and a density. To measure the refractive index of the solution, ice particles in the ice slurry should be completely removed and a hydro-cyclone was introduced instead of a mesh. The measuring method through the refractive index coincided with the density method using the real-time solution density within ${\pm}5%$ error range, having the error range less than the other two methods. In the other hand, the measuring method through the density has a good resolution, but the result using the initial density of the solution was different more than 10% error from that using the real-time density. And it has an error range 1.5 times greater than the method through the refractive index.

• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.821-826
• /
• 2006

This paper describes a rollover index (RI)-based rollover mitigation control (RMC) system. A rollover index which indicates an impending rollover has been developed by a roll dynamics phase plane analysis. The rollover index is calculated using the roll angle, the roll rate, the lateral acceleration and time to wheel lift (TTWL). A differential braking control law based on a 2-D bicycle model has been designed using the direct yaw control (DYC) method. An RMC threshold has been determined from the rollover index. The performance of the RMC scheme and the effectiveness of the proposed rollover index are illustrated using a vehicle simulator.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.1-6
• /
• 2003

This study was carried out to investigate the effect of internal fibrillation on the pulp and paper properties. The internal fibrillation was introduced into the SwBKP and recycled SwBKP by the mechanical treatment with Hobart mixer. WRV and physical properties of SwBKP were improved by the internal fibrillation. However the mechanical treatment of recycled SwBKP resulted in the decrease of strength properties of paper except for the tear index, although it was observed that WRV was somewhat increased by the mechanical treatment. The decrease of strength properties of recycled SwBKP might be caused by the hornification of fiber and the decrease of fiber strength.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.25-28
• /
• 1999

In this article, a new performance index is proposed to re-duce the collision impulsive force by controlling the null motion of redundant manipulators. First, we define the normalized impact ellipsoid in the viewpoint of instantaneous velocity change. Then, we propose a new impact performance index based on velocity direction for null motion to reduce initial impulsive effects. It gives some advantage for the case of unknown environment. The optimization of this index is that the successional impact forces are reduced. The performance of the proposed index is demonstrated by simulation study.