• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.804-807
• /
• 2005

The characteristics of the standard floor impact sources and the human impact source were investigated. First, the mechanical impedance of the each source was evaluated. Second, the impact force exposure levels and impact sounds level driven by the each source were measured. The results showed that the mechanical impedance and impact force exposure level of the impact ball are the most similar to those of the human impact source among the standard impact sources.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.86.6-86
• /
• 2002

This work presents a study on development of a practical and quantitative technique for assessment of the healthy state of a structure by piezoelectric impedance-based technique associated with longitudinal wave propagation measuring method. A truss structure embedded with piezoelectric patches is investigated for a fundamental study on estimation of the looseness of bolts in the joint. In order to evaluate the minute mechanical impedance change due to loosening bolt, a harmonic longitudinal elastic wave is applied to the structure by a pair of PZT patches and their electric impedance is measured simultaneously. According to the experimental results, the change of the electric impedance of P...

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.18-28
• /
• 2001

The present study investigates flow dynamics between two dimensional compliant plates under sinusoidal flow conditions in order to understand influence of wall motion, impedance phase angle (time delay between pressure and flow waveforms), and non-Newtonian fluid on wall shear stress using computational fluid dynamics. The results showed that wall motion induced additional terms in the streamwise velocity profile and the pressure gradient. These additional terms due to wall motion reduced the amplitude of wall shear stress and also changed the mean wall shear stress. The trend of the changes was very different depending on the impedance phase angle. As the impedance phase angle was changed to more negative values, the mean wall shear stress decreased while the amplitude of wall shear stress increased. As the phase angle was reduced from 0°to -90°under $\pm$4% wall motion, the mean wall shear stress decreased by 12% and the amplitude of wall shear stress increased by 9%. Therefore, for hypertensive patients who have large negative phase angles, the ratio of amplitude and mean of the wall shear stress is raised resulting in a more vulnerable state to atherosclerosis according to the low and oscillatory shear stress theory. We also found that non-Newtonian characteristics of the blood protect atherosclerosis by decreasing the oscillatory shear index.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.667-673
• /
• 2010

본 논문은 의사-임피던스 모델을 이용하여 2족보행로봇이 비평탄면에서 보행하는 제어기법을 제안한다. 의사-임피던스 모델은 인간이 보행 시, 발바닥이 지면과 순응하는 동작을 모사하였다. 지면과 접촉하면서 인간의 발바닥은 2가지 보행상태를 갖게 된다. 첫 번째 상태에서는 지면과 순응하기 위해 노력이나 의도적인 토크를 가하는 것이 아니라 수동적인 모션으로 순응하게 된다. 두 번째 상태에서는 지면과 접촉한 후, 적절한 토크를 유지하여 인간의 몸이 보행을 지속할 수 있게끔 유도하며 이를 하중이동단계라고 한다. 이러한 과정이 안정적으로 로봇의 보행을 유지할 수 있음을 12자유도의 2족보행로봇과 6축의 힘을 가지는 환경모델을 반영한 시뮬레이션을 통해 보여준다. 이러한 시뮬레이션결과가 제안된 의사-임피던스 모델이 효과적임을 보여준다.

• Smart Structures and Systems
• /
• 제1권4호
• /
• pp.339-353
• /
• 2005

This paper presents the results of a feasibility study on an impedance-based damage detection technique using thickness modes of piezoelectric (PZT) patches for steel structures. It is newly proposed to analyze the changes of the impedances of the thickness modes (frequency range > 1 MHz) at the PZT based on its resonant frequency shifts rather than those of the lateral modes (frequency range > 20 kHz) at the PZT based on its root mean square (RMS) deviations, since the former gives more significant variations in the resonant frequency shifts of the signals for identifying localities of small damages under the same measurement condition. In this paper, firstly, a numerical analysis was performed to understand the basics of the NDE technique using the impedance using an idealized 1-D electro-mechanical model consisting of a steel plate and a PZT patch. Then, experimental studies were carried out on two kinds of structural members of steel. Comparisons have been made between the results of crack detections using the thickness and lateral modes of the PZT patches.

• Smart Structures and Systems
• /
• 제5권1호
• /
• pp.81-94
• /
• 2009

A vibration-impedance-based monitoring method is proposed to predict the loss of prestress forces in prestressed concrete (PSC) girder bridges. Firstly, a global damage alarming algorithm using the change in frequency responses is formulated to detect the occurrence of damage in PSC girders. Secondly, a local damage detection algorithm using the change in electro-mechanical impedance features is selected to identify the prestress-loss in tendon and anchoring members. Thirdly, a prestress-loss prediction algorithm using the change in natural frequencies is selected to estimate the extent of prestress-loss in PSC girders. Finally, the feasibility of the proposed method is experimentally evaluated on a scaled PSC girder model for which acceleration responses and electro-mechanical impedances were measured for several damage scenarios of prestress-loss.

• 대한기계학회논문집A
• /
• 제39권5호
• /
• pp.499-505
• /
• 2015

압전 진동 에너지 수확 장치의 설계 및 성능 평가 시 에너지 변환 효율을 고려하는 것은 매우 당연하다. 본 연구에서 고려하는 에너지 변환 효율은 부하 저항이 부착된 압전 진동 에너지 수확 장치에 입력되는 가진 진동 파워 대비 전기 출력 값으로 정의된다. 기존의 연구에서는 근사적으로 임피던스 정합된 부하 저항에서의 전기 출력을 고려한 반면, 본 연구에서는 최적의 임피던스 정합 값을 사용하여 새롭게 에너지 변환 효율 식을 유도하였다. 유도된 식의 타당성을 검증하기 위해 3 개의 서로 다른 전기-역학 연성 계수 값을 갖는 진동 에너지 수확 장치에 대한 유한 요소 해석 결과를 이용하였다. 또한, 부하 저항의 임피던스 정합 방법의 차이에 따른 에너지 변환 및 변환 효율 특성을 살펴보았다.

• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.347-352
• /
• 2011

일반 산업용 로봇의 위치정밀도는 $100{\mu}m$ 정도임에 반해, 정밀부품의 조립공차는 수십 ${\mu}m$ 이내이다. 또한, 조립공차가 작을 경우 미소한 위치/각도 오차에 의해 재밍 또는 웨징이 쉽게 발생하며, 위치제어 기반의 로봇인 경우 부품 조립 시 접촉력을 적절히 조절하지 못하여 조립물이 파손될 가능성이 크다 이와 같은 문제를 해결하기 위하여 접촉력에 능동적으로 반응할 수 있는 힘제어 기반의 로봇조립에 대한 연구가 진행되고 있다. 본 연구에서는 기존의 산업용 로봇에 적용하기 용이하도록 위치제어 기반의 머니퓰레이터에 힘제어를 적용할 수 있는 시스템을 구현하였다. 머니퓰레이터에 어드미턴스 필터를 이용한 임피던스 제어를 적용하여 안정적인 접촉운동을 구현하였다. 또한, 임피던스 제어와 blind 검색을 적용하여 정밀부품을 조립할 수 있음을 검증하였다.

• 한국정밀공학회지
• /
• 제34권2호
• /
• pp.115-123
• /
• 2017

This paper presents the design and the control performance of a novel dynamic compliant-arm support with parallel elastic actuators that was developed to assist with the daily living activities of those whose arms are compromised by muscular disease or the aging process. The parallel elastic-arm support consists of a compliant mechanism with combined passive and active components for human interaction and to reach the user's desired positions. The achievement of these tasks requires impedance control, which can change the virtual stiffness, damping coefficients, and equilibrium points of the system; however, the desired-position tracking by the impedance control is limited when the end-effector weight varies according to the equipping of diverse objects. A prompt algorithm regarding weight calibration and friction compensation is adopted to overcome this problem. A result comparison shows that, by accurately assessing the desired workspace, the proposed algorithm is more effective for the accomplishment of the desired activities.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.163-169
• /
• 2018

The present article discusses about the measurement techniques of acoustic impedance that becomes one of the important acoustic characteristics of various boundaries found inside of propulsion systems. Acoustic characteristics including acoustic impedance and reflection coefficient can be often assessed and estimated by use of the two-microphone method. Theoretical expressions of acoustic impedance and reflection coefficient measured in an impedance tube are presented for both cases with mean flow and without flow, and the practical application of the method through calibration is also provided. The acoustic impedance and the reflection coefficient are related with axial locations of microphones, thermodynamic characteristics of gas inside, and the transfer function between the pressure wave measurements at multiple locations.