• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.7
• /
• pp.1180-1190
• /
• 2020

Objective: To develop healthier comminuted meat products to meet consumer demand, the gel properties, rheological properties, microstructure and water distribution of pork meat batters formulated with various amounts of bamboo shoot dietary fiber (BSDF) were investigated. Methods: Different levels of BSDF (0% to 4%) were added to pork batters, and the pH, color, water-holding capacity, texture and rheological properties of pork batters were determined. Then, pork batters were analyzed for their microstructure and water distribution using scanning electron microscopy (SEM) and low-field nuclear magnetic resonance (LF-NMR). Results: Compared with the control, BSDF addition into meat batters showed a significant reduction in L^*-value and a significant increase in b^*-value (p<0.05). BSDF addition of up to 4% reduced the pH value of pork batters by approximately 0.15 units; however, the cooking loss and expressible water loss decreased significantly (p<0.05) with the increased addition of BSDF. The hardness and gel strength were noticeably enhanced (p<0.05) as the content of BSDF increased. The rheological results showed that BSDF added into pork batters produced higher storage modulus (G') and loss modulus (G") values. The SEM images suggested that the addition of BSDF could promote pork batters to form a more uniform and compact microstructure. The proportion of immobilized water increased significantly (p<0.05), while the population of free water was decreased (p<0.05), indicating that BSDF improved the water-holding capability of pork batters by decreasing the fraction of free water. Conclusion: BSDF could improve the gel properties, rheological properties and water distribution of pork meat batters and decrease the proportion of free water, suggesting that BSDF has great potential as an effective binder in comminuted meat products.

• Journal of Animal Science and Technology
• /
• v.59 no.4
• /
• pp.8.1-8.17
• /
• 2017

Growth promoters have been widely used as a strategy to improve productivity, and great benefits have been observed throughout the meat production chain. However, the prohibition of growth promoters in several countries, as well as consumer rejection, has led industry and the academy to search for alternatives. For decades, the inclusion of phytochemicals in animal feed has been proposed as a replacement for traditional growth promoters. However, there are many concerns about the application of phytochemicals and their impact on the various links in the meat production chain (productive performance, carcass and meat quality). Therefore, the effects of these feed additives are reviewed in this article, along with their potential safety and consumer benefits, to understand the current state of their use. In summary, the replacement of traditional growth promoters in experiments with broilers yielded benefits in all aspects of the meat production chain, such as improvements in productive performance and carcass and meat quality. Although the effects in pigs have been similar to those observed in broilers, fewer studies have been carried out in pigs, and there is a need to define the types of phytochemicals to be used and the appropriate stages for adding such compounds. In regard to ruminant diets, few studies have been conducted, and their results have been inconclusive. Therefore, it is necessary to propose more in vivo studies to determine other strategies for phytochemical inclusion in the production phases and to select the appropriate types of compounds. It is also necessary to define the variables that will best elucidate the mechanism(s) of action that will enable the future replacement of synthetic growth promoters with phytochemical feed additives.

• Animal Bioscience
• /
• v.37 no.4_spc
• /
• pp.755-774
• /
• 2024

The main objective of this study was to present data on the current situation and future trends of pig meat production in the European Union-27 (EU). Pig production has played an important social and economic role for centuries in many states of the EU. In 2022, pig meat production in the EU reached 23 M tons, which represented 21% of total production worldwide. The two key reasons that justify such amount of pork produced, are the acceptance and high consumption of the meat by the local population and the high quality of the meat produced which facilitated pork export. However, current data show a reduction in pork production for the last three years, as a consequence of a series of events that include i) problems with the chain of ingredients supply, ii) uncontrolled increase in African Swine Fever (ASF) outbreaks, iii) fast recovery of pig production in China, iv) increasing concerns by the rural population on the high cost to meet future requirements of the EU legislation on farm management, environmental sustainability and animal welfare, v) increased cost of all inputs involved in pig production and vi) limited interest of the new farmer generation to work on the pig sector. Consequently, pork production is expected to decrease in the EU for the next years, although sales will be maintained at a relative high level because pork is the meat preferred by local consumers in most EU countries. In order to maintain the favourable position of the pork industry in the near future, strategies to implement include: i) maintain the quality of the meat destinated to export markets, ii) improve the control of outbreaks of ASF and other swine diseases, iii) implementation of technological innovations to improve working conditions making more attractive to work in the pork sector of the food chain to the new generation of farmers and workers.

• Food Science of Animal Resources
• /
• v.41 no.1
• /
• pp.16-33
• /
• 2021

To stop hunger, reducing food losses is a potential movement towards saving food. A large portion of these losses could be avoided and reduced through the improved food chain in many countries. Raising awareness on how and where food losses occur will help recovering foods such as meat by identifying solutions and convincing people to implement those solutions. This, in turn, will lead to private and public efforts to recover meat that might be otherwise wasted. After highlighting the importance of food saving benefits and relevant statistics, this paper explains the possible ways to reduce meat loss and waste in abattoirs and presents a framework for prevention according to the estimates of meat losses in Iran meat supply. The current article answers the questions of where do we have the meat loss in Iran and what approaches are most successful in reducing losses in the meat industry. The national average loss and waste in meat production are about 300,000 metric tonnes (about 15%). Many segments and players are involved with this huge amount of losses in the meat value chain, a large portion of these losses could be avoided and reduced by about 25% through using by-products with the mechanization of design and manufacturing. The production amount of mechanically deboned meat (MDM) is 105,091,000 kg, concluding the major waste (88.33%) of total poultry losses. Ensuring appropriate actions by exploiting the full potential of engaged Iranian associations and institutes is considered to reduce the losses.

• Food Science of Animal Resources
• /
• v.42 no.5
• /
• pp.762-774
• /
• 2022

The COVID 19 pandemic resulted in a considerable influence on the world economy. Being a big sector of the economy, the food supply chain struggled. The meat supply chain was most notably affected as every part of the supply chain from farm to shelf was closely inter-related. With the closure of businesses and restaurants the demand for at home food from grocery stores increased. Meat production facilities were impacted when the virus spread to the workers causing facilities to close or line speeds to slow. The combination of these two issues, in turn, led to there being less meat on the shelves. With less meat animals being harvested, there was less demand for livestock leading to farmers having an excess in slaughter ready animals. The decreased demand for livestock led to economic issues as money was lost in multiple sections of the supply chain. Aside from the economy and supply chain issues, other issues include concerns over the safety of meat products due to decreased safety protocols to increase line speed. Additionally, concerns of animal welfare with the excess of animals being culled were raised due to decreased capacity in processing facilities. While this review paper mainly focuses on characterizing the impact of COVID 19 on the meat supply chain in the USA, the compiled information should be able to provide practical insights to the meat/food industry across the globe to develop potential mitigating strategies against the COVID 19 and/or any similar pandemic incidences in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.523-528
• /
• 2013

This study investigates the effects of three branched-chain amino acids (BCAA; valine, leucine, and isoleucine) on the in vitro ruminal fermentation of wheat straw using batch cultures of mixed ruminal microorganisms. BCAA were added to the buffered ruminal fluid at a concentration of 0, 2, 4, 7, or 10 mmol/L. After 72 h of anaerobic incubation, pH, volatile fatty acids (VFA), and ammonia nitrogen ($NH_3$-N) in the ruminal fluid were determined. Dry matter (DM) and neutral detergent fiber (NDF) degradability were calculated after determining the DM and NDF in the original material and in the residue after incubation. The addition of valine, leucine, or isoleucine increased the total VFA yields ($p{\leq}0.001$). However, the total VFA yields did not increase with the increase of BCAA supplement level. Total branched-chain VFA yields linearly increased as the supplemental amount of BCAA increased (p<0.001). The molar proportions of acetate and propionate decreased, whereas that of butyrate increased with the addition of valine and isoleucine (p<0.05). Moreover, the proportions of propionate and butyrate decreased (p<0.01) with the addition of leucine. Meanwhile, the molar proportions of isobutyrate were increased and linearly decreased (p<0.001) by valine and leucine, respectively. The addition of leucine or isoleucine resulted in a linear (p<0.001) increase in the molar proportions of isovalerate. The degradability of NDF achieved the maximum when valine or isoleucine was added at 2 mmol/L. The results suggest that low concentrations of BCAA (2 mmol/L) allow more efficient regulation of ruminal fermentation in vitro, as indicated by higher VFA yield and NDF degradability. Therefore, the optimum initial dose of BCAA for in vitro ruminal fermentation is 2 mmol/L.

• Food Science of Animal Resources
• /
• v.38 no.4
• /
• pp.794-805
• /
• 2018

To identify correlation between fresh meat and processed meat products, we performed canonical correlation analysis (CCA) to predict the relationship between pork supply and meat product production in Korea. Results of CCA showed a canonical correlation of 0.8576 in the first canonical pair (p<0.01). The production of meat products showed the highest correlation with pork import but the lowest correlation with the production of domestic pork. Although Korean consumer preferred meat products produced by fresh domestic pork, inexpensively imported pork with high share in meat products was supplied in the market. Therefore, securing domestically produced raw meat is important for expanding consumption of domestic meat products. Results of this study suggest that meat processor and pig producer can achieve the $6^{th}$ industrialization by combining the production of raw pork materials, meat processing, and sales service.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.721-733
• /
• 2019

Objective: The objectives of this study were to investigate the thermal gelation properties and molecular forces of actomyosin extracted from two classes of chicken breast meat qualities (normal and pale, soft and exudative [PSE]-like) during heating process to further improve the understanding of the variations of functional properties between normal and PSE-like chicken breast meat. Methods: Actomyosin was extracted from normal and PSE-like chicken breast meat and the gel strength, water-holding capacity (WHC), protein loss, particle size and distribution, dynamic rheology and protein thermal stability were determined, then turbidity, active sulfhydryl group contents, hydrophobicity and molecular forces during thermal-induced gelling formation were comparatively studied. Results: Sodium dodecyl sulphate-polyacrylamide gel electrophoresis showed that protein profiles of actomyosin extracted from normal and PSE-like meat were not significantly different (p>0.05). Compared with normal actomyosin, PSE-like actomyosin had lower gel strength, WHC, particle size, less protein content involved in thermal gelation forming (p<0.05), and reduced onset temperature ($T_o$), thermal transition temperature ($T_d$), storage modulus (G') and loss modulus (G"). The turbidity, reactive sulfhydryl group of PSE-like actomyosin were higher when heated from $40^{\circ}C$ to $60^{\circ}C$. Further heating to $80^{\circ}C$ had lower transition from reactive sulfhydryl group into a disulfide bond and surface hydrophobicity. Molecular forces showed that hydrophobic interaction was the main force for heat-induced gel formation while both ionic and hydrogen bonds were different significantly between normal and PSE-like actomyosin (p<0.05). Conclusion: These changes in chemical groups and inter-molecular bonds affected protein-protein interaction and protein-water interaction and contributed to the inferior thermal gelation properties of PSE-like meat.

• Animal Bioscience
• /
• v.34 no.12
• /
• pp.1995-2002
• /
• 2021

Objective: Detection of adulteration in processed meats is an important issue for some countries due to substitution of beef with a cheaper source of protein like poultry. In this study, the presence of chicken meat was investigated using real-time polymerase chain reaction (real-time PCR) and enzyme-linked immunosorbent assay (ELISA) techniques to verify adulteration of fermented sausage samples. Methods: A total of 60 commercial samples were collected from 20 establishments in three replicates including 10 fermented sausage manufacturers and 10 butchers to investigate the presence of chicken meat with the sequential use of real-time PCR and ELISA techniques. In addition, pH, moisture content, water activity and color values of the samples were determined. Results: Both real-time PCR and ELISA showed agreement on the presence or absence of chicken meat in 55 out of 60 fermented sausage samples and chicken meat was identified with both methods in 16 samples. Five samples produced inconsistent results for the presence of chicken meat in the first run. Nevertheless, the presence of chicken meat was verified with both methods when these samples were analyzed for the second time. In addition, the average physico-chemical values of the fermented sausage samples tested positive for chicken meat were not significantly different from some of those fermented sausage samples tested negative for the chicken meat. Conclusion: The sequential use of real-time PCR and ELISA techniques in fermented sausages could be beneficial for the government testing programs to eliminate false negatives for detection of adulteration with chicken meat. Furthermore, consumers should not rely on some of the quality cues including color to predict the adulteration of fermented sausages with chicken meat since there were no statistical differences among some of the samples tested positive and negative for chicken meat.

• Animal Bioscience
• /
• v.35 no.10
• /
• pp.1489-1498
• /
• 2022

Objective: The objective of this study was to identify polymorphism in olfactomedin like 3 (OLFML3) gene, and association analysis with meat quality, carcass characteristics, retail meat cut, and fatty acid composition in sheep, and expression quantification of OLFML3 gene in phenotypically divergent sheep. Methods: A total of 328 rams at the age of 10 to 12 months with an average body weight of 26.13 kg were used. A novel polymorphism was identified using high-throughput sequencing in sheep and genotyping of OLFML3 polymorphism was performed using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Among 328 rams, 100 rams representing various sheep genotypes were used for association study and proc general linear model was used to analyse association between genotypes and phenotypic traits. Quantitative real-time polymerase chain reaction (qRT-PCR) was used for the expression analysis of OLFML3 mRNA in phenotypically divergent sheep population. Results: The findings revealed a novel polymorphism in the OLFML3 gene (g.90317673 C>T). The OLFML3 gene revealed three genotypes: CC, CT, and TT. The single nucleotide polymorphism (SNP) was found to be significantly (p<0.05) associated with meat quality traits such as tenderness and cooking loss; carcass characteristics such as carcass length; retail meat cut such as pelvic fat in leg, intramuscular fat in loin and tenderloin, muscle in flank and shank; fatty acids composition such as tridecanoic acid (C13:0), palmitoleic acid (C16:1), heptadecanoic acid (C17:0), ginkgolic acid (C17:1), linolenic acid (C18:3n3), arachidic acid (C20:0), eicosenoic acid (C20:1), arachidonic acid (C20:4n6), heneicosylic acid (C21:0), and nervonic acid (C24:1). The TT genotype was associated with higher level of meat quality, carcass characteristics, retail meat cut, and some fatty acids composition. However, the mRNA expression analysis was not different among genotypes. Conclusion: The OLFML3 gene could be a potential putative candidate for selecting higher quality sheep meat, carcass characteristics, retail meat cuts, and fatty acid composition in sheep.