• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.328-331
• /
• 1998

Because of the powerful tolerance of overload, dynamic response and anti-erosion, Reluctive Pressure Transducer(RPT), as a measuring element of oil pressure equipment is applied to the measuring system of vessels, air craft. The Electrical reluctance appeared in the pressed diaphragm. To process the reluctance as a electric signal, bridge circuit is used. The design using the reluctance of pressure sensor is described in this paper. For the high efficiency of the sensitive RPT, pressure sensor structure is presented and electrical signal processing is simulated.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.113-123
• /
• 1993

In a sensory evaluation, the data obtained by a result of evaluation have a wide dispersion and fuzziness because human sense organ is used as a means of measuring sensation instead of measuring instruments. These dispersion and fuzziness are caused by all kinds of time error and have a great influence on a sensory evaluation, but most of previous papers don't deal with these time errors. In this study, a comparative judgement capacity of an evaluator is discriminated by means of the eigen-structure analysis on the premise that evaluation value of sensory evaluators obtained by a paired-comparison become different by the order of sample presentation

• Journal of the Korea Construction Safety Engineering Association
• /
• s.48
• /
• pp.64-74
• /
• 2009

Measurement is a essential part in all kinds of industry, especially in manufacturing. But until now, measurement hasn't been located to the core of manufacturing in domestic. This improvement guide line for the multilateral problems of measuring instrument investigation of small and medium-sized enterprises. To use measuring treat it must be accustomed with the structure, the performance, the method. must be corrected periodically. The correcting-schedule is established with accuracy, stability, purpose, condition, and frequency.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.781-788
• /
• 2003

It is an essential process to predict behaviors of ground and structure to seek economical efficiency and stability on the given environment. Predictions are conducted through analysis process of ground and structure. For these analyses, exact and quick acquisition of measuring data is required. But we face many difficulties in data acquisition stages due to the conditions of construction site. Therefore development of a powerful and effective monitoring system that can manage the integration of database and the implementation of measuring process in real time is strongly desired. This article shows an actual example of application of internet based monitoring system compared with the conventional monitoring system.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.151-158
• /
• 2006

Structural health monitoring is concerned with the safety and serviceability of the users of structures, especially for the case of building structures and infrastructures. When considering the safety of a structure, the maximum stress in a member due to live load, earthquake, wind, or other unexpected loadings must be checked not to exceed the stress specified in a code. It will not fail at yield, excessively large displacements will deteriorate the serviceability of a structure. To guarantee the safety and serviceability of structures, the maximum displacement in a structures must be monitored because actual displacement is a direct assessment index on its stiffness. However, no practical method has been reported to monitor the displacement, especially for the case of displacement of high-rise buildings because of not to easy accessive. In this paper, it is studied displacement measuring method of high-rise buildings using LiDAR The method is evaluated by analyzing accuracy of measured displacements for existing building.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.56-59
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.143-151
• /
• 2000

Dissolved silica is make some critical trouble at steam turbine. And, we must measure it to ppb level. We were looking for the best measuring method of the silica. Via this study, we could found it in the N-IR spectroscopy technology. This dissertation have been discuss about system structure, system fundamentals and performance test. At the test, we were study in the spectral interference of $NH_3$. We know that existing system had some problem. It is structural frailties of single beam type. Therefore we were study for double beam type structure. And we obtain a good result. In the result, it have been discuss that conduct a test of $NH_3$ effect.

• Biomedical Science Letters
• /
• v.7 no.3
• /
• pp.127-131
• /
• 2001

This study was undertaken to examine the effect of amino acids on anoxia-induced cell injury in rabbit renal cortical slices. In order to induce anoxic cell injury, slices were exposed to a 100% $N_2$ atmosphere and control slices were exposed to 100% $O^2$. Irreversible cell injury was estimated by measuring lactate dehydrogenase (LDH) release and alterations in renal cell function were examined by measuring p-aminohippurate (PAH) uptake. Anoxia caused the increase in LDH release in a time-dependent manner. Glycine and glutathione almost completely prevented anoxia-induced LDH release. Of amino acids tested, glycine and alanine exerted the protective effect against anoxia-induced cell injury. However, asparagine with amide side chain, leucine and valine with hydrocarbon side chain, and basic amino acids (lysine, histidine, and arginine) were not effective. Anoxia-induced inhibition of PAM uptake was prevented by glycine. ATP content was decreased by anoxia, which was not affected by glycine. Anoxia-induced depletion of glutathione was significantly prevented by glycine. These results suggest that neutral amino acids with simple structure exert the Protective effect against anoxia-induced cell injury the involvement of specific interaction of amino acids and cell structure.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.11
• /
• pp.556-560
• /
• 2004

In this paper, thermal and structural properties of epoxy/elastomer blend were measured by DSC, TGA and FESEM. Specimens were made of dumbbell forms by the ratio of 5, 10, 15, and 20[phr] by changing elastomer content. The measuring temperature ranges of DSC were from -20[℃] to 150[℃] and heating rate was 4[℃/min]. And the measuring temperature ranges of TGA were from 0[℃] to 800[℃], and heating rate was 5[℃/min]. Also we observed structure of specimens through FESEM with magnification of 1000 times and voltage of 15[kV] by breaking quenched specimens. As experimental results, we could know that thermal and structural properties were improved according to decrease of elastomer content. Because it increased glass transition temperature, high temperature and structure of elastic epoxy.

• 연구논문집
• /
• s.30
• /
• pp.43-56
• /
• 2000

N-IR spectroscopy technology is very useful. And, the technology has wide application range. In the range, we know that single beam type silica analyzer has some handicap. So we were studied Splitted beam type silica analyzer. This dissertation have been discuss about system structure, system fundamentals and performance test. At the test, we were study in the spectral interference of NH3. We know that existing system had some problem. It is structural frailties of single beam type. Therefore we were study for Splitted beam type structure. And we obtain a good result. We have $\pm$5% accuracy and 0.5 ppb level measuring range. But, we have a question. It is ppt level measuring technology by the laser beam spectroscopy.