• 제목/요약/키워드: Measuring Time Reduction

검색결과 205건 처리시간 0.031초

어획능력(Fishing Capacity)의 측정과 감축수준 결정에 관한 연구 -기선권현망어업을 중심으로- (A Study on the Measurement of Fishing Capacity and the Determination of Its Reduction Levels)

  • 이정삼;김도훈
    • Ocean and Polar Research
    • /
    • 제28권4호
    • /
    • pp.439-449
    • /
    • 2006
  • This study was aimed at measuring the fishing capacity of Powered Anchovy Drag Net Fisheries (PADNF) in Korea using Peak-to-Peak(PTP) and Data Envelopment Analysis(DEA) methods recommended by FAO. In the analysis, both fishing capacities of total PADNF and individual PADNF vessels were measured with time series data and cross sectional data, respectively. In addition, the results of the DEA measurement were analyzed in order to determine reduction levels of fishing capacity. In case of total PADNF, the results by rn and DEA methods showed a similar rate of capacity utilization (79%), indicating the capacity was not utilized enough. In addition, the sensitivity analysis suggested that the number of vessels should be reduced by 20%, and the gross tonnage and the horse power should be reduced by 20% and 21%, respectively if the current catch is to stay at the 2004 level. The DEA results on individual PADNF vessels indicated the capacity utilization was 75% on average, showing some differences in capacity utilization among vessels (31%-100%). The results of the study would be useful for measuring production efficiency in PADNF. They would also provide good policy information for efficient use of resources and capacity reduction levels, which are useful far vessel buyback programs of coastal and offshore fisheries.

비례공진 제어기를 이용한 단상 계통연계형 인버터의 데드타임 영향과 옵셋 오차로 인한 전류맥동 저감에 관한 연구 (A Study on Current Ripple Reduction Due to Offset Error and Dead-time Effect of Single-phase Grid-connected Inverters Based on PR Controller)

  • 성의석;황선환
    • 전력전자학회논문지
    • /
    • 제20권3호
    • /
    • pp.201-208
    • /
    • 2015
  • The effects of dead-time and offset error, which cause output current distortion in single-phase grid-connected inverters are investigated this paper. Offset error is typically generated by measuring phase current, including the voltage unbalance of analog devices and non-ideal characteristics in current measurement paths. Dead-time inevitably occurs during generation of the gate signal for controlling power semiconductor switches. Hence, the performance of the grid-connected inverter is significantly degraded because of the current ripples. The current and voltage, including ripple components on the synchronous reference frame and stationary reference frame, are analyzed in detail. An algorithm, which has the proportional resonant controller, is also proposed to reduce current ripple components in the synchronous PI current regulator. As a result, computational complexity of the proposed algorithm is greatly simplified, and the magnitude of the current ripples is significantly decreased. The simulation and experimental results are presented to verify the usefulness of the proposed current ripple reduction algorithm.

대용량 EEPROM 메모리 셀 검증용 모듈 회로 설계 (Design of a Cell Verification Module for Large-density EEPROM Memories)

  • 박헌;김일준;하판봉;김영희
    • 한국정보전자통신기술학회논문지
    • /
    • 제10권2호
    • /
    • pp.176-183
    • /
    • 2017
  • 대용량 EEPROM 메모리를 테스트하는 경우 erase time과 program time이 많이 걸리는 문제가 있다. 또한 신뢰성 테스트를 진행하면서 각 스텝마다 EEPROM 셀의 문턱전압 VT를 테스트할 필요가 있다. 본 논문에서는 512kb EEPROM 셀 검증용 모듈 회로를 설계하였으며, negative VTE를 갖는 split gate EEPROM의 VT 측정을 위한 CG(Control Gate) 구동회로를 제안하였다. 제안된 CG 구동회로는 erase VT를 측정하기 위해 -3V~0V의 negative 전압이 인가될 수 있도록 asymmetric isolated HV (High-Voltage) NMOS 소자를 사용하였다. 그리고 test time reduction 모드에서는 even page, odd page, chip 단위로 erase나 program 수행이 가능하도록 회로를 설계하므로 512Kb EEPROM 전체 메모리를 erase하거나 program할 때 시간을 even page와 odd page를 이용하는 경우는 4ms, chip 전체로 하는 경우는 2ms로 테스트 시간을 줄일 수 있었다.

CISG상 손해배상과 대금감액의 관계에 관한 중국 CIETAC의 중재사례 연구 (A Study on CIETEC Arbitration Case for the Relationship between Damages and Reduction under CISG)

  • 송수련
    • 무역상무연구
    • /
    • 제51권
    • /
    • pp.133-158
    • /
    • 2011
  • The purpose of this study is to analyze one of CIETEC(China International Economic and Trade Arbitration Commission) Award on the dispute arising from Cotton Sale Contact which deals with damages and reduction of the price. Especially this case focused on the effect of reduction of the price to damages. The purpose of damages is to place the aggrieved party in as good a position as if the other party had properly performed the contract. So court costs and attorney's fee should be regarded as the loss, because these are caused by consequence of the breach which is recoverable. With the same reason, overpaid taxes should also regard as the loss. It is not impossible, however, to claim both damages and reduction of the price for same loss at the same time. It means buyer could not claim damages for the same loss, once he already claimed reduction of the price. So Korean companies should consider which remedy is proper to himself under the circumstances. He should choose reduction of the price when market price is down. In case of rising market price, he should consider follows: first, it is better to choose damages based on current price(Art.76), if upswing of non-conformity price is higher then upswing of market price. Second, it is better to choose general rule for measuring damages(Art.74), if upswing of market price is higher then upswing of non-conformity price.

  • PDF

A Continuous Spectrophotometric Assay for NADPH-cytochrome P450 Reductase Activity Using 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium Bromide

  • Yim, Sung-Kun;Yun, Chul-Ho;Ahn, Tae-Ho;Jung, Heung-Chae;Pan, Jae-Gu
    • BMB Reports
    • /
    • 제38권3호
    • /
    • pp.366-369
    • /
    • 2005
  • NADPH-cytochrome P450 reductase (CPR) transfers electrons from NADPH to cytochrome P450 and also catalyzes the one-electron reduction of many drugs and foreign compounds. Various spectrophotometric assays have been performed to examine electron-accepting properties of CPR and its ability to reduce cytochrome $b_5$, cytochrome c, and ferricyanide. In this report, reduction of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) by CPR has been assessed as a method for monitoring CPR activity. The principle advantage of this substance is that the reduction of MTT can be assayed directly in the reaction medium by a continuous spectrophotometric method. The electrons released from NADPH by CPR were transferred to MTT. MTT reduction activity was then assessed spectrophotometrically by measuring the increase of $A_{610}$. MTT reduction followed classical Michaelis-Menten kinetics ($K_m\;=\;20\;{\mu}M$, $k_{cat}\;=\;1,910\;min^{-1}$). This method offers the advantages of a commercially available substrate and short analysis time by a simple measurement of enzymatic activity of CPR.

Value at Risk의 사후검증을 통한 다변량 시계열자료의 차원축소 방법의 비교: 사례분석 (Comparison of Dimension Reduction Methods for Time Series Factor Analysis: A Case Study)

  • 이대수;송성주
    • 응용통계연구
    • /
    • 제24권4호
    • /
    • pp.597-607
    • /
    • 2011
  • 금융자산에의 투자에서 리스크 관리의 중요성이 부각되면서 리스크를 측정할 수 있는 도구로서 Value at Risk (VaR)가 널리 각광을 받고 있다. Value at Risk는 주어진 신뢰수준에서 목표기간 동안 발생 가능한 최대손실로 정의되는데 몇 가지 한계점이 있지만 비교적 간단하게 계산되고 이해될 수 있다는 장점이 있어 리스크 측정 및 관리의 기본적인 측도로 이용되고 있다. 그러나 포트폴리오에 포함되는 자산의 숫자가 많아지는 경우 VaR을 계산하는 데에 필수적인 변동성 추정이 매우 어려워지게 된다. 이때 차원축소의 방법을 생각할 수 있는데, 전통적인 인자분석은 시계열자료에 적합한 방법이 아니기 때문에 직접 적용할 수 없고 자료의 자기상관성을 제거하는 방법이 선행되어야 한다. 본 논문에서는 인자분석의 확장 형태인 시계열인자분석을 활용하여 시계열자료의 차원축소과정을 간결하게 하는 방법을 제시하고, 시계열인자분석으로 차원을 축소할 때 기존의 방법을 사용하는 것과 어떠한 차이가 있는지를 실제 금융자료를 이용한 VaR의 사후검증을 통해 분석하였다.

틸팅기술 접목을 통한 철도차량 에너지 저감 연구 (A Study on the Energy Saving through the Tilting Technology of Rolling Stock)

  • 김대식;손경소;김호순;김진우;김종길
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.3027-3031
    • /
    • 2011
  • In this study, By the time that TTX technology is adopted as railway rolling stock, we analyzed quantitatively energy saving by reducing the power consumption with the reduction of the operation time through the speed improvement and suggested the necessity to introduce TTX technology in the domestic rail vehicles. The effect of energy saving by comparing and analyzing the power consumption during the operation by TTX Hanvit 200 and 8200 electric locomotives to pull trains on the same line was suggested and the efficiency of the main devices(i.e C/I) of Hanvit 200 was compared and analyzed by measuring the power consumption by a single unit. For improving KORAIL management environment, reducing energy usage is an urgent challenge, its measures for solving them are constantly considered in many areas. In addition, at the time of improving the conventional track to speed up and changing the signals, Tilting technology will be contributed to the management environment by enlarging the passengers' demand through the reduction of the operation time and saving energy using the existing infrastructure.

  • PDF

Study of random characteristics of fluctuating wind loads on ultra-large cooling towers in full construction process

  • Ke, S.T.;Xu, L.;Ge, Y.J.
    • Wind and Structures
    • /
    • 제26권4호
    • /
    • pp.191-204
    • /
    • 2018
  • This article presents a study of the largest-ever (height = 220 m) cooling tower using the large eddy simulation (LES) method. Information about fluid fields around the tower and 3D aerodynamic time history in full construction process were obtained, and the wind pressure distribution along the entire tower predicted by the developed model was compared with standard curves and measured curves to validate the effectiveness of the simulating method. Based on that, average wind pressure distribution and characteristics of fluid fields in the construction process of ultra-large cooling tower were investigated. The characteristics of fluid fields in full construction process and their working principles were investigated based on wind speeds and vorticities under different construction conditions. Then, time domain characteristics of ultra-large cooling towers in full construction process, including fluctuating wind loads, extreme wind loads, lift and drag coefficients, and relationship of measuring points, were studied and fitting formula of extreme wind load as a function of height was developed based on the nonlinear least square method. Additionally, the frequency domain characteristics of wind loads on the constructing tower, including wind pressure power spectrum at typical measuring points, lift and drag power spectrum, circumferential correlations between typical measuring points, and vertical correlations of lift coefficient and drag coefficient, were analyzed. The results revealed that the random characteristics of fluctuating wind loads, as well as corresponding extreme wind pressure and power spectra curves, varied significantly and in real time with the height of the constructing tower. This study provides references for design of wind loads during construction period of ultra-large cooling towers.

Formation of Soluble Intermediate During the Electrochemical Crystallization of Lead Dioxide

  • Hwang, Eui-Jin;Kim, Ha-Suck
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권5호
    • /
    • pp.390-393
    • /
    • 1994
  • Details on the electrochemical formation of lead dioxide from aqueous plumbous ion are studied by measuring current-time behavior with potential step method at a rotating platinum electrode. A cubic law without induction period can be applied to the crystallization of lead dioxide in both acetate and nitrate media. In the course of the mechanistic study, the presence of a soluble intermediate during the nucleation step is clearly observed with a rotating ring-disk electrode. Decrease in the anodic ring current due to the reduction of soluble species formed during the anodic crystallization of lead dioxide at disk is detected.

Characterization of Recycled Coarse Aggregate (RCA) via a Surface Coating Method

  • Ryou, J.S.;Lee, Y.S.
    • International Journal of Concrete Structures and Materials
    • /
    • 제8권2호
    • /
    • pp.165-172
    • /
    • 2014
  • Recycled coarse aggregate (RCA) made from waste concrete is not a suitable structural material as it has high absorption of cement mortar, which adheres on the aggregate surface and on the tiny cracks thereon. Therefore, when using RCA made from waste concrete, much water must be added with the concrete, and slump loss occurs when transporting. Hence, its workability is significantly worse than that of other materials. In this study, surface of RCA was coated with water-soluble polycarboxylate (PC) dispersant so that its characteristics improved. Each possibility was evaluated: whether its slump loss can be controlled, by measuring its workability based on the elapsed time; and whether it can be used as a structural material, by measuring its strength. Moreover, the carbonation due to cement mortar adhesion was measured through a carbonation test. As a result, RCA coated with PC dispersant was found to be better than crushed coarse aggregate and RCA when the physical properties of the fresh concrete and the mechanical, durability of the hardened concrete were tested.