• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.966-971
• /
• 2011

This study is designed to develop programs that analyze the distance of clothes from human skin and cross-sectional body figures based on 3D human body scan data, and to verify accuracy and efficiency of the program so that it can be used for clothing fit evaluation and 3D human body research. The auto cross-sectional imaging program was developed by using Visual C++ and OpenGL, and the 3D human body scan data were adopted to measure the space between skin and clothing. The space measurements were obtained by two widely used programs, RapidForm and AutoCAD, and a program devised by the researchers of this study. Measuring time and space measurements from different programs were compared in order to verify accuracy and efficiency of the newly-devised program. As a result, no significant difference was found in the measurements. However, the required time to measure one cross section was different within the significance level of 0.05, and the differences become more remarkable as the number of measuring and the angle of space between skin and clothing increase. Therefore, the program developed by this study is expected to be useful for research on body shapes and fit evaluation based on 3D human body scan data in the fashion field.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.37.2-37.2
• /
• 2011

The growth of three-dimensional ZnO hybrid structures by metal-organic chemical vapor deposition was controlled through their growth pressure. Vertically aligned ZnO nanorods were grown on c-plane sapphire substrate at $600^{\circ}C$ and 400 Torr. ZnO film was then formed in-situ on the ZnO nanorods at $600^{\circ}C$ and 10 Torr. High-resolution X-ray diffraction and transmission electron microscopy measurements showed that the ZnO film on the nanorods/sapphire grew epitaxially, and that the ZnO film/nanorods hybrid structures had well-ordered wurtzite structures. The hybrid ZnO structure was shown to be about 5 ${\mu}m$ by field-emission scanning electron microscopy. The hybrid structure showed better crystalline quality than mono-layer film on sapphire substrate. Consequently, purpose of this work is developing high quality hybrid epi-growth technology using nano structure. These structures have potential applicability as nanobuilding blocks in nanodevices.

• 한국지반환경공학회 논문집
• /
• 제8권1호
• /
• pp.5-11
• /
• 2007

담수시 저수되는 수압에 의해 face slab con'c 내부의 응력변화가 발생하여 댐 제체의 안정성에 영향을 미칠 가능성이 있으므로 face slab con'c의 내부 응력변화를 측정하기 위하여 매립형 strain gauge가 많이 적용되고 있다. 따라서 본 연구에서는 ${\circ}{\circ}$댐에 적용된 strain gauge를 이용하여 댐 제체 내 외부 변형을 측정하였다. 그 결과 댐의 안정성 분석과 전체적인 경향을 파악함에 있어서 strain gauge의 계측 값만으로는 한계가 있으므로 관련 계기의 측정값을 함께 검토해야 할 것으로 사료된다.

• 대한의생명과학회지
• /
• 제21권3호
• /
• pp.135-143
• /
• 2015

Electrocardiogram measures the electric impulses generated by the heart during its cycle. Recently genome-wide association studies on electrocardiogram traits revealed many relevant genetic loci. Therefore, these findings need to be validated and investigated to determine the underlying mechanisms using mouse models. Invasive radiotelemetry has been widely used to record the electrocardiogram in mice because it has several advantages over non-invasive measurements. However, radiotelemetry is expensive and requires complicated surgery. On the other hand, a non-invasive method using 3 electrodes (one for earth) for lead II is easy to establish and allows for rapid measurement. In this study, eleven mice were measured with this non-invasive method and no statistical difference among them was found in any ECG measurements. In addition, repeat measurement in the same mouse was performed in 9 sets of experiment and the results indicated that non-invasive method was reliable for reproducibility. Further it was shown that measurements for 1, 5, 10, and 15 minutes were not different so that a short recording such as 5 minutes was enough to estimate the ECG values including heart rate. Further this method was validated by measuring the ECG of Balb/c and FVB that were previously shown to differ in ECG values by radiotelemetry. Significant differences were found in heart rate, PR interval and corrected QT interval between these mouse strains. This study partially proved that non-invasive method also could provide the accuracy and reproducibility. Based on these results, the non-invasive ECG recordings of lead II is recommended as a useful method for quick test in mouse model.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.235-240
• /
• 2006

Ionospheric scintillation induces a rapid change in the amplitude and phase of radio wave signals. This is due to irregularities of electron density in the F-region of the ionosphere. It reduces the accuracy of both pseudorange and carrier phase measurements in GPS/satellite based Augmentation system (SBAS) receivers, and can cause loss of lock on the satellite signal. Scintillation is not as strong at mid-latitude regions such that positioning is not affected as much. Severe effects of scintillation occur mainly in a band approximately 20 degrees on either side of the magnetic equator and sometimes in the polar and auroral regions. Most scintillation occurs for a few hours after sunset during the peak years of the solar cycle. This paper focuses on estimation of the effects of ionospheric scintillation on GPS and SBAS signals using a software receiver. Software receivers have the advantage of flexibility over conventional receivers in examining performance. PC based receivers are especially effective in studying errors such as multipath and ionospheric scintillation. This is because it is possible to analyze IF signal data stored in host PC by the various processing algorithms. A L1 C/A software GPS receiver was developed consisting of a RF front-end module and a signal processing program on the PC. The RF front-end module consists of a down converter and a general purpose device for acquiring data. The signal processing program written in MATLAB implements signal acquisition, tracking, and pseudorange measurements. The receiver achieves standalone positioning with accuracy between 5 and 10 meters in 2drms. Typical phase locked loop (PLL) designs of GPS/SBAS receivers enable them to handle moderate amounts of scintillation. So the effects of ionospheric scintillation was estimated on the performance of GPS L1 C/A and SBAS receivers in terms of degradation of PLL accuracy considering the effect of various noise sources such as thermal noise jitter, ionospheric phase jitter and dynamic stress error.

• Applied Science and Convergence Technology
• /
• 제25권3호
• /
• pp.56-60
• /
• 2016

The ALD process is an adequate technique to meet the requirements that come with the downscaling of semiconductor devices. To obtain thin films of the desired standard, it is essential to understand the thermal decomposition properties of the precursors. As such, this study examined the thermal decomposition properties of TEMAHf precursors and its effect on the formation of $HfO_2$ thin films. FT-IR experiments were performed before deposition in order to analyze the thermal decomposition properties of the precursors. The measurements were taken in the range of $135^{\circ}C-350^{\circ}C$. At temperatures higher than $300^{\circ}C$, there was a rapid decrease in the absorption peaks arising from vibration of $Sp^3$ C-H stretching. This showed that the precursors experienced rapid decomposition at around $275^{\circ}C-300^{\circ}C$. $HfO_2$ thin films were successfully deposited by Atomic Layer Deposition (ALD) at $50^{\circ}C$ intervals between $150^{\circ}C$ to $400^{\circ}C$; the deposited films were characterized using a reflectometer, X-ray photoelectron spectroscopy (XPS), Grazing Incidence X-ray Diffraction (GIXRD), and atomic force microscopy (AFM). The results illustrate the relationship between the thermal decomposition temperature of TEMAHf and properties of thin films.

• 한국한의학연구원논문집
• /
• 제2권1호
• /
• pp.84-103
• /
• 1996

The physiological signals measured by Oriental Medicine instruments have been analyzed quantitatively in the view of the rule of promoting and counteracting relation of five evolutive phases theory. We tried to reduce the physiological signals measured by EAV(Elec-tro-Acupuncture according to Voll) and IR thermography to the representation of five evelutive phases. The EAV index and local skin temperature on acupuncture points of each phases measured and normalized so that the total value of five phases became unity. We assumed that the normalized EAV index and local skin temperature mean the deficiency or excess of Qi for each phases. The state of Qi distribution for each phases were approximately agree with the diagnostic pattern of O. M. doctor. Taking account of the Qi distribution state of·or the five evolutive phases, we performed a proper needle insertion on acupuncture points to induce the distinct change of Qi for each phases. We compared the measured results with the predictions of Qi variation by the rule of pro- moting and counteracting relation over the five evolutive phases. For all cases, the variation of Qi in the own phase on which a needle insertion was performed were exactly same to the theoretical prediction and partial agreement was shown for the other four phases. The same analysis was carried to the results of skin temperature measurements at accupoints. We found that the local skin temperature at accupoints of each phases shelved a finite change by the needle insertion and the behavior- of its change were strongly correlated to the rule of promoting and counteracting relation of five evolutive phases.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.137-144
• /
• 2021

Purpose: This study aimed to investigate the accuracy of head scatter factor (S_c) by applying a developed multi-leaf collimator (MLC) scatter source model for an unflattened photon beam. Methods: Sets of S_c values were measured for various jaw-defined square and rectangular fields and MLC-defined square fields for developing dual-source model (DSM) and MLC scatter model. A 6 MV unflattened photon beam has been used. Measurements were performed using a 0.125 cm³ cylindrical ionization chamber and a mini phantom. Then, the parameters of both models have been optimized, and S_c has been calculated. The DSM and MLC scatter models have been verified by comparing the calculated values to the three S_c set measurement values of the jaw-defined field and the two S_c set measurement values of MLC-defined fields used in the existing modeling, respectively. Results: For jaw-defined fields, the calculated S_c using the DSM was consistent with the measured S_c value. This demonstrates that the DSM was properly optimized and modeled for the measured values. For the MLC-defined fields, the accuracy between the calculated and measured S_c values with the addition of the MLC scatter source appeared to be high, but the only use of the DSM resulted in a significantly bigger differences. Conclusions: Both the DSM and MLC models could also be applied to an unflattened beam. When considering scattered radiation from the MLC by adding an MLC scatter source model, it showed a higher degree of agreement with the actual measured S_c value than when using only DSM in the same way as in previous studies.

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.199-207
• /
• 2009

콘크리트 또는 시멘트 모르타르와 같은 비금속성 재료에서 유전상수와 전도율과 같은 전자기 평가는 특성화 될 수 있으므로 최근 들어 많은 연구가 수행되고 있다. 그러나 이러한 전자기 특성은 수분에 의하여 매우 큰 영향을 받으므로 이에 대한 전자기 거동이 명확하게 이해되어야 한다. 본 논문에서는 5가지 물-시멘트비를 가지는 시멘트모르타르에 대하여, 포화도 및 전자기 특성 측정이 압축강도와 공극률 평가와 함께 수행되었다. 각각의 포화된 시편은 실내상태에 존치되었으며, 포화도의 변화에 따른 전자기 특성이 분석되었다. 포화상태에서는, 공극률이 높은 시편에서 높은 전자기 특성이 평가되었지만, 이러한 관계는 건조가 진행됨에 따라 반대로 평가되었다. 공극수가 없는 공극에서 전자기 특성이 감소되므로, 물-시멘트비가 낮아질수록 안정적이고 선형적인 전자기 특성 증가를 나타내었다. 한편, 물-시멘트비에 따른 전자기 특성 증가율이 포화도와 함께 제시되었으며, 회귀분석을 통하여 그 상관관계가 도출되었다.

• 대한화학회지
• /
• 제48권4호
• /
• pp.358-366
• /
• 2004

두개의 sulphato로 다리걸친 착물 $[Cr_2(NH_2)_2(H_2O)_2(SO_4)_2]{\cdot}2H_2O$, 말단 3개의 isocyanato $[Cr(NCO)_3(H_2O)]{\cdot}3H_2O$ 화합물과 갈철광 $[FeO(OH)]{\cdot}0.2H_2O$ 화합물들은 각각의 $Cr_2(SO_4)_3{\cdot}xH_2O, Cr(CH_3COO)_3, Fe_2(SO_4)_3$과 $80^{\circ}C$, 수용액에서 요소와 반응으로 합성되었다. 생성물들의 IR 스펙트럼에서 요소(urea)의 띠가 나타나지 않지만, 결합된 아마이드(amide), 물, 연결된 sulphato와 isocyanato 그룹에 대해서 특징적인 띠를 보인다. 착물들에 대한 열무게분석(TG)과 시차열분석법(DTA) 측정을 기록하였다. 얻어진 데이터들은 예상했던 구조화 잘 일치한다. 형성에 대한 설명과 화합물의 열역학적 분해에 대한 일반적인 메커니즘을 제시하였다.