• 한국컴퓨터정보학회논문지
• /
• 제24권12호
• /
• pp.191-199
• /
• 2019

이 논문의 목적은 대학생의 디지털 역량을 진단하기 위한 검사 도구를 개발하는 것이다. 이를 위해 디지털 역량 관련 선행연구를 고찰하고 내용 요소를 선정하여 6개 영역, 40개 문항의 1차 검사 도구를 개발하였다. 이후 223명의 대학생을 대상으로 설문 조사하고, 요인분석을 통해 디지털 역량을 측정하기 위한 요소와 문항을 정제하였다. 그리고 확인적 요인분석을 통해 모형적합도를 통계적으로 만족시킨 6개 요인, 18개 문항으로 구성된 대학생 디지털 역량 검사 도구를 최종적으로 확정하였다. 이 연구에서 개발한 대학생용 디지털 역량 검사 도구는 디지털 기기 운용, 소통 및 협업, 정보 검색·처리·관리, 문제 해결 및 학습, 보안, 디지털 윤리 등과 같은 6가지 하위 구성요소로 구성되었다. 이렇게 개발된 검사 도구는 집중 타당도와 판별 타당도가 높아 대학생의 디지털 역량을 측정하는데 적합한 검사 도구임을 확인하였다. 이 연구에서 개발된 디지털 역량 검사 도구는 대학생의 현재 역량 수준을 파악하고 교육적 지원을 통해 학생들의 디지털 역량을 향상하는데 활용될 것으로 기대한다.

• 한국식품영양학회지
• /
• 제29권2호
• /
• pp.253-266
• /
• 2016

The current study was conducted to facilitate appropriate hygiene and safety management in children's food service stations, with the ultimate objective of providing sanitary and safe food service to children. In order to develop questionnaire items, literature review was conducted, in addition to detailed interview of working-level personnel at a children's food service management support center. This resulted in a total of thirty questions on personal hygiene management, food materials hygiene management, and facilities hygiene management. Using the questionnaire, seventy-one food service stations for children in District A in Seoul that serve less than one hundred children were surveyed to analyze the reliability, construct validity, and correlation in the developed measurement tool. The developed measurement tool consisted of ten task and environmental hygiene management questions, five personal and cooking hygiene management questions, four food ingredient and storage hygiene management questions, and four food service operation and management question; with a total of twenty-three questions, in four factors stated above. The cumulative distribution of the four factors was 54.698%, and Cronbach's ${\alpha}$ value was 0.672~0.853, which indicated that the study was reliable. The results of the analysis indicated that each of the factors were correlated, the study was satisfactory, and the tool was valid for evaluating hygiene and safety management practices in children's food service stations. Finally, in order to enhance practical utility of the developed measurement tool, the significance and limitations were described.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1066-1069
• /
• 2004

Recently the monitoring system of tool setup in high speed precision machining tool is required for manufacturing products that have highly complex and small shape, high precision and high function. It is very important to reduce time to setup tool in order to improve the machining precision and productivity and to protect the breakage of cutting tool as the shape of product is smaller and more complex. Generally, the combination of errors that geometrical clamping error of fixing tool at the spindle of machining center and the asynchronized error of driving mechanism causes that the run-out of tool reaches to 3∼20 times of the thickness of cutting chip. And also the run-out is occurred by the misalignment between axis of tool shank and axis of spindle and spindle bearing in high speed rotation. Generally, high speed machining is considered when the rotating speed is more than 8,000 rpm. At that time, the life time of tool is reduced to about 50％ and the roughness of machining surface is worse as the run-out is increased to 10 micron. The life time of tool could be increased by making monitoring of tool-setting easy, quick and precise in high speed machining center. This means the consumption of tool is much more reduced. And also it reduces the manufacturing cost and increases the productivity by reducing the tool-setup time of operator. In this study, in order to establish the concept of tool-setting monitoring the measuring method of the geometrical error of tool system is studied when the spindle is stopped. And also the measuring method of run-out, dynamic error of tool system, is studied when the spindle is rotated in 8,000 ∼ 60,000 rpm. The dynamic phenomena of tool-setup is analyzed by implementing the monitoring system of rotating tool system and the noncontact measuring system of micro displacement in high speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.838-841
• /
• 2000

To improve the accuracy of products and improve the product quality, we need to enhance the machining accuracy of the machine tools. To this point of view, measurement and inspection of finished part as well as error analysis of machine tools has been studied for last several decades. OMM(On the Machine Measurement) has been issued to alternate with CMM, pointing out disadvantages of high expenses and lots of setting time in CMM. In this paper, we study 1) the spherical surface manufacturing by volumetric error compensation of machine tool, 2) the system development of OMM without detaching work piece from a bed of machine tool after working. 3) the generation of the finished part profile by On the machine measurement. Furthermore, the output of OMM is compared with that of CMM, and verified the feasibility of the measurement system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.194-197
• /
• 1999

Automatic weld bead removal system is consisted of bead removal tool, bead profile measurement system and tool motion control system. In this paper, design of weld bead profile measurement system which is used for automatic weld bead removal system is described. The system measures the weld bead position, normal vector of the auto-body and weld bead profile. The optical sensor with structured laser beam is used as a sensor and comparison of the sensor that can be used for this purpose is discussed in detail. The measurement process and the related software developed for this purpose are also described. A median filter, average filter and long line filters are used and their effects in bead profile measurement are discussed. The measurement system is integrated into automatic bead removal system and is used to remove weld bead in rear pillar of automotive body. The whole system operates well in automotive body assembly line and thus the system is proved to be good for this purpose.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1043-1047
• /
• 2003

Most of the measurement and the evaluation of hand-transmitted vibration have been performed by using a small size single axis accelerometer between the handle and the hand palm or a three axis accelerometer attached on an adapter outside the hand(indirect measurement). It is most desirable for the correct evaluation of hand-transmitted vibration form the power tool handle to measure the acceleration between the handle surface and the hand palm in the three axis(direct measurement) as recommended in ISO 5349-1. In the study three axes acceleration measurement device was developed of which the thickness was less than 7mm so that it can be placed between the handle and the palm without any inconvenience during the measurement. To verify the performance of the developed device, measured acceleration by the two methods, direct and indirect, were compared in the study.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.57-63
• /
• 2003

Machining information such as form accuracy and surface roughness is an important factor for manufacturing precise parts. To this regard, OMM (On the Machine Measurement) has been researched for last several decades to alternate CMM (Coordinate Measurement Machine) process. In this research, the OMM system with a laser displacement sensor was developed for measuring form accuracy and surface roughness of the machined workpiece on the machine tool. The surface roughness was estimated comparing the sensory signal with the reference data measured from master specimen. Also, form accuracy was determined from the moving averaged raw data. In addition, the geometric error map constructed beforehand using the geometric errors of the machine tool was used to compensate the obtained form accuracy. The overall performance was compared with CMM result, and verified the feasibility of the measurement system.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.80-85
• /
• 2007

High speed cutting is a machining process which cuts materials with the fast movement and rotation of a spindle in a machine tool. High speed cutting leaves a plastically deformed layer on the machined surface. This deformed layer affects in various forms to the surface roughness of machined parts such as the dimensional instability, the micro crack. The surface roughness is called surface integrity which is very important in precision cutting. This paper aims to study on the machined surfaces characteristics of aluminum alloy and brass by AFM(Atomic force microscope) measurement. The objective is contribution to ultra- precision cutting by exhibit foundation data of surface roughness and tool wear when parts are cutting with diamond tool at the factory.

• 간호행정학회지
• /
• 제10권2호
• /
• pp.175-184
• /
• 2004

Purpose: The purpose of this study was to develop a nursing organization culture measurement tool and to test the validity and reliability of the tool. Method: This study conducted in three phases. In phase 1, theoretical framework choice, Phase 2, measurement items selection, Phase 3, testing of validity and reliability. In order to test validity and reliability of the measurement, data were collected from 915 nurses, working in the 22 hospitals with more 500 beds. The data obtatined were analyzed by SPSS-Win 10.0 program using percentages, Factor Analysis, Cronbach's alpha Coefficients. Result: As a result of the study, nursing organization culture measurement scale was consisted of 20 items, 4 factors. 4 factor explained 60.54% of the total variance, and the Cronbach's alpha of this scale was .8829. Conclusions: The Study supports the validity and reliability of the scales. Therefore, this scale can be effectively utilized for the evaluation of nursing organization culture in hospital setting.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.197-205
• /
• 2022

In order to investigate the effect of an 8-week elastic band exercise program according to age on the isokinetic strength and dynamic equilibrium of the knee, 10 women under 49 years old and 10 women over 50 years old were selected. Dynamic equilibrium was measured through Y-Balance test one week before the exercise program, and power and endurance were confirmed by measuring isokinetic muscle strength of the knee. After measurement, small tool exercise was performed for 8 weeks. After 8 weeks of exercise, isokinetic muscle strength and dynamic equilibrium were measured. As a result, isokinetic muscle strength, which checks muscle strength and muscular endurance, increased after measurement than before measurement regardless of age, and dynamic equilibrium increased after measurement rather than before measurement, and the group under 49 years of age was higher than the group over 50 years old. We think that small tool exercise improves isokinetic muscle strength and is effective in neuromuscular development, improving dynamic stability ability, which is an important factor in preventing falls.