• 대한수학교육학회지:학교수학
• /
• 제13권1호
• /
• pp.107-125
• /
• 2011

본 논문에서는 GSP(The Geometer's Sketchpad)를 이용한 역동적 기하 환경이 학생의 기하학적 성질의 추측에 어떤 영향을 미치는지를 살펴보았다. 좀 더 구체적으로 살피면, GSP 환경에서 학생들은 문제 상황에서 주어지지 않은 새로운 조건들을 생성하고 그 조건하에서 성질을 추측하는 활동이 활발하고, 문제의 조건이 너무 적은 개방적인 문제 상황에서는 추측 활동이 미약하였다. 또한 GSP 환경에서 추측한 성질은 지필환경에서 추측한 성질보다 복잡하였고 증명하기 어려웠으며 GSP의 다양한 기능 중 'Alt' 키를 이용하여 화면을 이동시킬 수 있는 기능은 측정과 계산 기능 등 과 같이 기하적 성질의 추측에 요긴하게 사용되었다. 또한 학생들은 기하적 성질을 증명할 때보다 스스로 기하적 성질을 발견하였을 때 더 자부심을 갖게 되며 더 기쁘게 생각하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1715-1717
• /
• 2004

We attempt to investigate morphology of self-assembled dipyridinium dithioacetate on Au(111) substrate by Scanning Tunneling Microscopy(STM). Also, we measured electrical properties using Scanning Tunneling Spectroscopy(STS). Sample that use this experiment acquires thiol function beside quantity by dipyridinium dithioacetate, is structure that can be self-assembled easily to Au(111) substrate. The same self-assembly procedure was used for two different concentrations, 0.5mmol/ml and 1mmol/ml. Dilute density of sample by 0.5mmol/ml, 1mmol/ml and observed dipyridinium dithioacetate's image by STM after self-assembled on Au(111) substrate. The structure of Tip/SAMs/Au(111) has been used measurement for electrical properties(i-v) using STM. The current-voltage measurement result, observed negative differential resistance(NDR) properties.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.226-231
• /
• 2001

The purpose of this paper is to propose the experimental method of thermal properties of Phase Change Materials (PCMs) by using T-history method. As far, in order to measure the heat of fusion and specific heat of PCMs, conventional thermal analysis methods such as DSC and DTA have been used. Because these methods test very small samples, thermal properties of samples are usually different from those of materials consisting of several components. For these reasons, T-history method, the simple measurement method of the heat of fusion and specific heat of PCMs have been performed. In this paper, we investigated the thermal properties of low temperature PCMs(below $0^{\circ}C$) under the charging process by using T-history method. The results are compared to those of DSC method. The T-history method will be useful for selection of the best PCM from lots of candidates and development of new PCMs.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권8호
• /
• pp.381-386
• /
• 2006

In this study, we have investigated electrical and mechanical properties of semiconducting materials for power cable caused by CNT. Specimens were made of sheet form with the four of specimens for measurement. Volume resistivity of specimens was measured by volume resistivity meter after 10 minutes in the pre-heated oven of both $23{\pm}\;1\;[^{\circ}C]\;and\;90{\pm}\;1\;[^{\circ}C]$. And stress-strain of specimens was measured by TENSOMETER 2000. A speed of measurement was 200[mm/min], ranges of stress and strain were 400[Kgf/Cm2] and 600[%]. From this experimental results, the volume resistivity had different properties because of PTC/NTC tendency at between $23[^{\circ}C]\;and\;90[^{\circ}C]$. Also volume resistivity was low by increasing the content of CNT. It means that a small amount of CNT has a excellent electrical properties. And stress was increased, while strain was decreased by increasing the content of CNT. Thus, we could know that a small amount of CNT has a excellent electrical and mechanical oroperties.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.739-744
• /
• 2007

In this paper, we have investigated mechanical and chemical properties by changing the content of carbon nanotube, which is component part of semiconductive shield in underground power transmission cable. Specimens were made of sheet with the eight of those for measurement. The condition of specimens was a solid sheet. Chemical properties of specimens was measured by FT-ATR (Fourier Transform Attenuated Total Reflectance). Stress-strain of specimens was measured by TENSOMETER 2000. A speed of measurement was 200[mm/min], ranges of stress and strain were 400[Kgf/Cm] and 600[%]. We could observe (unctional group (C=O, carbonyl group) of specimens through FT-ATR. From these experimental result, the concentration of functional group [C=O] was high accor야ng to increasing the content of carbon nanotube. We could know CNT/EEA was excellent more than other specimens from above experimental results. In Addition, the elongation ratio was decreased, and yield strength was increased according to increasing the content of carbon nanotube. Also, from these experimental result, we could know that a small amount of CNT/EEA has a excellent mechanical and chemical properties.

• Asia Pacific Journal of Business Review
• /
• 제5권1호
• /
• pp.21-36
• /
• 2020

This paper examines the effect of the choice properties of food carving decoration lectures on the recommendation and revisiting intention. As the culinary industry grows, consumers seek not only the value of satiety through food but also the value of aesthetics. They perceived satisfaction from the taste and appearance of the food as well as the interior of the restaurant and the service. Food carving is an important means of fulfilling consumer satisfaction value which is ever-changing. This study attempts to analyze the relationship between the choice properties of food carving lectures and the course recommendation and revisiting intention. This study hypothesis was formulated and the survey was conducted on 125 respondents who had experienced food carving lectures. The reliability and validity of measurement items were verified through Cronbach's Alpha and factor analysis. As a result, all measurement items showed no abnormality. The results of the analyses are as follows. The education satisfaction, education commitment, and brand image, the choice properties of food carving decoration lecture, were found to have a positive effect on the recommendation intention. The results also showed that the education commitment and brand image of food carving decoration lectures were positively associated with revisiting intention. Lastly, the implications of these findings were suggested and for future research were discussed.

• 한국정보통신학회논문지
• /
• 제8권1호
• /
• pp.185-191
• /
• 2004

본 논문은 컴퓨터 그래픽에서 주요 이슈중 하나인 의류 착장시스템 구현을 위하여 직물의 가장 큰 특성중의 하나인 드레이프성 측정에 관한 연구이다. 가장 최적의 직물의 드레이프성을 구하기 위해 거리함수를 이용하여 볼록점을 계산한 후 직물의 둘레 및 면적, 볼록점 사이의 최대 최소 점과 평균거리와 같은 정보를 구하였다. 그리고 직물의 드레이프성을 나타내는 척도로 직물의 둘레와 면적을 기준으로 원형도를 구하였다. 실험결과 원형도가 직물의 드레이프성을 나타내는 여러 특성치 중 가장 좋은 결과를 보였다. 측정된 직물의 드레이프성은 의류 착장시스템 개발에 기여할 것이다.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.489-495
• /
• 2009

A novel technique to measuret of viscoelastic properties of polymers is proposed to investigate complex Poisson's ratio as a function of frequency. The forced vibration responses for the samples under the normal and the shear deformation are to be measured with varying load masses. The measured data were used to obtain the viscoelastic properties of the material based on an accurate 2D numerical deformation model of the sample. The 2D model enabled us to exclude data correction by the empirical form factor used in 1D model. Comprehensive measurements of viscoelastic properties of two slightly varied silicone RTV rubber ($Silastic^{(R)}$ S2) compositions were performed. Standard composition (90% PDMS polymer + 10% catalyst) and modified composition (92.5% polymer + 7.5% catalyst) were tested in temperature range from $30^{\circ}C$ to $70^{\circ}C$. Shear modulus, modulus of elasticity, loss factor, and both the real and the imaginary parts of the Poisson's ratio were determined for frequencies from 50 to 400Hz in the linear deformation regime (at relative deformations $10^{-4}{\sim}10^{-3}$).

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1167-1174
• /
• 2008

The measurement of two-dimensional magnetic properties of electrical steel sheet using single sheet tester (SST) requires to control the B-waveform as sinusoidal. The SST electric circuit, in general, has inductance, and this makes the phase lag in electric current. For this reason, the induced voltages of H- or B-coil may have phase difference from the exciting voltage. In this paper, a new algorithm is developed to compensate the phase difference and makes the B-waveform control efficient. The developed algorithm experimentally calculates the phase difference based on the measured waveform of the induced voltage for the magnetic field intensity along transverse direction. By using the proposed algorithm, the two-dimensional magnetic properties of grain-orientated electrical steel sheet (30PG110) is measured up to 2T. By comparing the measured B- and H-waveforms, the effectiveness of the proposed algorithm is proven.

• Journal of Magnetics
• /
• 제14권2호
• /
• pp.62-65
• /
• 2009

The multiferroic $BiFeO_3$ has been investigated extensively in both thin film and ceramic form. However, the synthesis of a perfect sample with high resistivity is a prerequisite for examining its properties. This paper reports the synthesis of multiferroic $BiFeO_3$ along with its structural, electrical and magnetic properties in ceramic form. Polycrystalline ceramic samples of $BiFeO_3$ were synthesized by solid-state reaction using high purity oxides and carbonates. The formation of a single-phase compound was confirmed by x-ray diffraction and its lattice parameters were determined using a standard computer program. The microstructural studies and density measurement confirmed that the prepared samples were sufficiently dense for an examination of its electrical and magnetic properties. The dc electrical conductivity studies show that the sample was resistive with an activation energy of ${\sim}0.81\;eV$. The magnetization measurement showed a linear ($M{\sim}H$) curve indicating antiferromagnetic characteristics.