• 대한가정학회지
• /
• 제37권2호
• /
• pp.113-126
• /
• 1999

In order to investigate the detergency effect of stained cotton and PET fabric, respectively, these fabrics stained with solid soils such as carbon black, liquid paraffin, and fat and examined the detergency effect in the optimum washing condition. The evaluation of washing efficiency of washed fabrics studied by using the surface reflectance measurement before and after washing treatment. The maximum detergency effect of stained cotton and PET fabric obtained in the mixed washing liquor-bleachig agen(ml)/concentrated washig agent(g/l). To obtain the excellent detergency effect, 2-step washing treatment, pre-washing by bleaching agent only and washing by concentrated detergent, is preferred. In comparing the detergency of polyester and cotton fabric, the detergency of stained polyester fabric superior than that of stained cotton fabric because of the difference of adhesive force between soil material and fabric in preparing soled stained fabric. In this study, we also studied the degree of fabric damage by the measurement of tensile strength change. From the results of the tensile strength measurement, the damage of washed fabric before and after washing treatment was nearly changed.

• 대한통합의학회지
• /
• 제4권2호
• /
• pp.53-65
• /
• 2016

Purpose : The purpose of this study was to evaluate the effectiveness and analyse the change on muscular strength and exercise performance ability of university students participating in leisure sports by elastic-band exercise program. Method : The subjects(N=22) participating in leisure sports are recruited from K university located in Chungbuk. The subjects which are divided to 2 groups as experimental group(N=11) conducted elastic-band exercise program and control group(N=11) conducted stretching program. The muscular strength and exercise performance ability were measured before and after intervention. Result : There were no significant differences(p>.05) in sex, age, height, and weight among subjects. In the measurement of muscular strength, a significant difference(p<.05) was observed in each group, and there was also significant difference(p<.05) between two groups except gastrocnemius(p>.05). A significant difference(p<.05) in muscular volume was observed in each group, and there was also significant difference(p<.05) between two groups apart from gastrocnemius(p>.05). In exercise performance ability, there was significant difference(p<.05) in sergent jump and side-step in each group, and there was a significant difference(p<.05) between two groups in sergent jump, but there was no significant difference(p>0.5) in side-step. Conclusion : Based on this study, through a variety of age and various intervention period to apply more subjects conducting elastic-band exercise program should continue.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.113-118
• /
• 2009

Grounding systems set the reference voltage level of electric circuits and suppress the Ground Potential Rise (GPR) by flowing fault currents to the ground safely. There are several parameters which evaluate the performance of grounding systems as ground resistance, touch voltage and step voltage. The touch and step voltages, which is called "risk voltage", are especially important to ensure the safety of human body. This paper dealt with the influence of current sources with the different frequency components on the touch and the step voltages. Three types of current sources as commercial frequency, square wave, and surge with the fast risetime of $50\;ns{\sim}500\;ns$ were used to analyze the risk voltages in a grounding system. The risk voltages showed remarkable difference in the same current amplitude depending on the current sources, and increased linearly with the current amplitude in the same current source. From the experimental results, it was confirmed that the risk voltages can be evaluated by a small current application in large-scale grounding systems and the possible largest risk voltage can be calculated by a surge current with the risetime of 200 ns or a current source with the same frequency component as the surge current.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.497-504
• /
• 2017

This paper proposes a method to measure the airburst height by utilizing a high speed camera. This method might be applied to the test of which flight target is alive after the burst. The proposed method consists of four main steps. The first step is to compute the impact point using the sea surface height. The second step is to compute the height of burst (HOB) by using the distance from the camera to the impact point. This could be different from the real explosion height. That is because the distance from the camera to the burst point is not the same as it from the camera to the impact point. Therefore, the third step is to calculate the approach angle of the flight target with respect to the installed camera. Then, the last step is to compensate the computed height by using the approach angle. The result of the proposed method is compared with it from the triangulation. In this paper, the HOB error is also analyzed regarding the approach angle difference. Based on this analysis, the camera position might be suggested for error reduction.

• 한국추진공학회지
• /
• 제2권1호
• /
• pp.31-40
• /
• 1998

고강도 알루미늄 대형 링롤재의 급냉 및 요소제거 후 발생하는 잔류응력을 2차원 및 3차원 유한요소 해석하였고, 3단계 절단법에 의해 측정된 변형율과 ABAQUS의 요소제거 기능을 이용한 해석값을 직접 비교하였다. 급냉후 잔류응력 해석결과는 2단 과시효후 측정값과 비슷한 경향을 보였으나 그 절대값의 차이가 크게 나타났다. 이는 링 시편의 높이가 작아 측정값이 부정확하였기 때문이며, 링의 높이를 증가시켜 높이방향으로 균일한 응력분포를 갖도록 하면 그 차이가 감소될 것으로 판단된다. 잔류응력을 측정하는 3단계 절단 과정을 모사한 3차원 해석결과와 측정된 변형율을 직접 비교함으로써 실험과 해석의 정확성을 향상시킬 수 있도록 하였다. 이로부터 잔류응력이 내재하고 형상이 복잡한 대형 알루미늄 구조물의 기계가 공에 의한 변형을 정확히 예측할 수 있는 기반을 마련하였다.

• 센서학회지
• /
• 제31권6호
• /
• pp.411-417
• /
• 2022

In this paper, we propose a sensor with a C-shaped load cell to detect force change when a person sitting on the chair in an electrical transport-convenience vehicle is pushing ground by both heels. The load cell built in the vehicle is mechanically deformed by the vertical force owing to the human weight and the horizontal force by ground-pushing feet. The deformation rate of the load cell and its distribution are simulated using finite element analysis. In the simulation, the applied loads are preset in the range of 10 kg - 100 kg with a step size of 10 kg, and the ground-pushing force by feet is increased to 40 N with a step size of 5 N with respect to each applied load level. The resistance change of the load cell was observed to be linear in simulation as well as in measurement. the maximum difference between simulation and measurement was 0.89 % when the strain gauge constant was 2.243. The constant has a large influence on the difference. The proposed sensor was fabricated by connecting an instrument amplifier and a microcontroller to a load cell and used to detect the force by ground-pushing feet. To detect foot driving, the reference signal was set to 130% of the load, and the duration of the sensor output signal exceeding the reference signal was set to 0.6 s. In a test of a vehicle built with the proposed sensor, the footpushing force by the worker could be successfully detected even when the worker was working.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.57-67
• /
• 2022

The demand for personal training (PT), through which high exercise effects can be achieved within short-term, has recently increased. PT can achieve an exercise amount improvement effect, only if accurate postures are maintained upon performing PT, and exercise with inaccurate postures can cause injuries. However, research is insufficient on exercise amount comparisons and judging exercise accuracy on PT. This study proposes an exercise accuracy measurement algorithm and compares differences in exercise amounts according to exercise postures through experiments using a respiratory gas analyzer. The exercise accuracy measurement algorithm acquires Euler anglesfrom major body parts operated upon exercise through a motion device, based on which the joint angles are calculated. By comparing the calculated joint angles with each reference angle in each exercise step, the status of exercise accuracy is judged. The calculated results of exercise accuracy on squats, lunges, and push-ups showed 0.02% difference in comparison with actually measured results through a goniometer. As a result of the exercise amount comparison experiment according to accurate posture through a respiratory gas analyzer, the exercise amount was higher by 45.19% on average in accurate postures. Through this, it was confirmed that maintaining accurate postures contributes to exercise amount improvement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.985-990
• /
• 2001

The widened Seoul-Bridge is the first continuous 8-span prestressed concrete(PSC) girder bridge in domain. The construction sequence of the bridge consists of S steps in a large way. The measuring in construction stage includes the determination of the allowable fluctuation value of beam stress in each step and the measurement beam stress during prestessing. The measured tendon prestress force was compared with the design value. When it was compared with the analytic result, the difference between the measured stress and the analytic stress was below allowable error. The friction loss and the anchorage slip loss of the tendon prestress force was lower than the design loss value.

• The Journal of Korean Physical Therapy
• /
• 제16권3호
• /
• pp.161-175
• /
• 2004

The purpose of this study was to determine the effect of HPAFO(Hinged Plastic Ankle Foot orthosis) and SPAFO(Solid Plastic Ankle Foot Orthosis) on standing balance and step moving in hemiplegia patients. Twenty hemiplegic patients were either inpatient or outpatient at the Rehabilitation medicine, MokPo J General Hospital and JeonJu J Medical Center from July 15, 2002 to September 15, 2002. Patients were able to ambulate independently for at least 10 meters and to stand independently for at least 10 minutes with balance measurement tool. The static balance and dynamic activity measurement was determined by SAKAI active balancer(Japan) with wearing HPAFO and wearing SPAFO. The static balance and dynamic activity analysis was analyzed by independent t-test. The results were as follows: 1. There were no significant difference in body weight bearing percent between wearing HPAFO and wearing SPAFO(p>0.05). 2. There were significant difference in whole path length between wearing HPAFO and wearing SPAFO(p<0.05). 3. There were significant difference in Effective Value Area between wearing HPAFO and wearing SPAFO(p>0.001). 4. There were significant difference in repeated functional time between wearing HPAFO and wearing SPAFO(p>0.001). 5. There were significant difference in cadence between wearing HPAFO and wearing SPAFO(p>0.001). The result of this study showed that wearing HPAFO and wearing SPAFO gave fair amount of improvement to static standing balance and dynamic movement ability of hemiplegic patients. The comparison result showed significant differences in between HPAFO and SPAHFO. The result of this study had a general limitation due to the restricted number of cases. The future study needs more detailed research and comparison with various variance between these two orthoses.

• 한국직업건강간호학회지
• /
• 제9권1호
• /
• pp.49-55
• /
• 2000

When standing, walking, or running for extended periods of time, fatigue occurs in the legs. Although there are many ways, to release tense or fatigued leg muscles, in the case that there is insufficient time to relax, an easy way to release leg fatigue is using an inclined step (about 3 minutes). This method was more effective than performing stretching exercises as studied. An experiment was conducted on a golf course in the Kangwon province in Korea. Subjects were chosen randomly and consisted of 5 females and 4 males golf caddies. Their main tasks consisted of pulling golf carts to the bottom of a hill for 8 to 10 hours and sometimes lifting and lowering golf clubs during the duration of one day. EMG was measured after work and after using the previously mentioned inclined Steps for the lower legs using ME3000P. This study investigated the types of inclined Steps which would be most effective and appropriate for golf caddies, whether sex difference had any influence existed between male and female workers. The results showed that a step with a $20^{\circ}$ angle was most effective for males and a step with a $25^{\circ}$ angle was most effective for females. Females showed faster recovery from fatigue than males. However, there were no statistical significance between males and females.