• ETRI Journal
• /
• 제29권2호
• /
• pp.135-142
• /
• 2007

The small anechoic chambers built by many small-/medium-sized companies and universities present difficulties in testing electrically large antennas because the chamber size cannot satisfy the far-field criterion of large antennas. In this paper, a method for Fresnel-region measurement on a cylindrical surface with variation of the measurement height is proposed and verified by both calculations and experiments. We implement the proposed method using a direct far-field measurement system by adding a few supporting structures. The results show good accuracy.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.79-82
• /
• 2008

A method is described for ideally reconstructing the profile from a surface profiling measurement containing a reasonable amount of null measurement data. The proposed method can conjecture lost information and rectify irregular data that result due to bad measuring environments, signal transmission noise, or instrument-induced errors, The method adopts the concept of computer graphics and consists of several processing steps. First, a search for valid data in the neighborhood of the null data is performed. The valid data are then grouped and their contours are extracted. By analyzing these contours, a bounding box can be obtained and the general distribution of the entire area encompassing the valid and null data is determined Finally, an ideal surface model is overlaid onto the measurement results based on the bounding box, generating a complete reconstruction of the calculations, A surface-profiling task on a liquid crystal display photo spacer is used to verify the proposed method. The results are compared to those obtained through the use of a scanning electron microscope to demonstrate the accuracy of the proposed method.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.457-462
• /
• 2023

Quantitative measurement of trace ethane is important in environmental science and biomedical applications. For these applications, we typically require a few tens of part-per-trillion level measurement sensitivity. To measure trace-level ethane, we constructed a cavity ring-down spectroscopy setup in the 3.37 ㎛ mid-infrared wavelength range, which is applicable to multi-species chemical analysis. We demonstrated that the detection limit of ethane is approximately 300 parts per trillion, and the measured concentration is in agreement with the amounts of the injected sample. We expect that these results can be applied to the chemical analysis of ethane and applications such as breath test equipment.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.676-680
• /
• 2002

기준 밀도계는 기준 조건하에서 밀도를 측정하는 기기로서, 산업계에서 특히 대유량 천연가스 계량에 폭 넓게 사용된다. 본 연구에서는 기준 밀도계의 적정 설치 및 운영방안을 제시하여 천연가스 유량 측정 정확도를 향상시키고자 현장 실험을 수행하였다. 실험 결과, 교정가스로 메탄과 질소가스 대신 메탄과 표준가스로 교정한 실험결과가 작은 밀도오차를 발생하고, 정확한 밀도 측정을 위해서는 정기적인 교정이 필수적이며, 또한 기준 밀도계는 주위 조건에 민감하게 반응하여, 주위 온도가 높으면 오차가 증가하는 것도 확인되었다.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1022-1027
• /
• 2004

In this paper, an embedded foot pressure measurement system is proposed to measure foot pressure based on the embedded Linux system. To measure foot pressure data and to evaluate foot pressure distribution for the different insoles, FSR sensor, A/D converter, iPAQ PDA, and a time division measurement method are employed in the system. Utilizing this system, the foot pressure analysis has been performed for the different four shoes. The number of foot pressure/voltage conversion circuits are drastically decreased by the proposed time division measurement method from 406 to 14. The experimental results for the sandal, slipper, oxford shoes and sneakers demonstrate that the proposed system successfully performs the foot pressure measurement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.85-87
• /
• 2000

In real-time power system control, it is essential to measure the power system variables which are voltage. current, real and reactive power, power factor, system frequency and etc. this variables can be estimated or calculated by the synchronized phasor informations of voltage and current. Therefore, the synchronized phasor measurement of voltage and current is very important to real-time power system control. So, we develop SPMD(Synchronized Phasor Measurement Device) for synchronized phasor measurement of voltage and current. In this paper, we present the design and implementation of SPMD for real-time phasor measurement and prove its performance by the test results.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3871-3874
• /
• 2012

• Korean Chemical Engineering Research
• /
• 제47권5호
• /
• pp.565-571
• /
• 2009

본 연구에서는 천연가스의 탄화수소 이슬점과 물 이슬점을 계산하고자 하였다. 이를 위해 임계압력 근방까지 탄화수소 이슬점이 계산되도록 발산 방지 로직을 고안하였고 물 이슬점의 대해서는, 상용프로그램과 달리 탄화수소 이슬점 이하에서도 이슬점이 계산될 수 있도록 로직을 개발하였다. 그리고 계산결과는 국외 상용프로그램 및 ISO와 비교하였으며 차이는 없는 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• 제47권5호
• /
• pp.599-607
• /
• 2009

본 연구에서는 천연가스와 관련된 정보 중 쉽게 구할 수 있는 발열량이나 비중만으로 비중(또는 발열량), 압축인자, 밀도 등을 계산할 수 있는 5가지 상관식을 도출하고자 하였다. 상관식 도출에 필요한 충분한 수의 기초 데이터를 생성하기 위해 SGERG 상태방정식을 발열량식으로 변형하여 사용하였고, 이렇게 생성된 데이터를 기초로 5가지 상관식을 도출하고 불확도를 평가하였다. 그 결과 대부분의 조건에서 상관식의 불확도가 0.1% 근방으로 나타나 천연가스 업계와 학계에서 사용될 수 있을 것으로 판단한다.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.250-255
• /
• 2011

This paper dealt with the design, fabrication and application of a risk voltage measurement system (RVMS) which analyzes the step and touch voltages in electrical grounding systems. The RVMS supply 300 V and 1.4 A in ranges from 40 Hz to 1 kHz as the test power source. A DAQ module having resolution of 400 kS/s and 16 bit is equipped with 7 inputs for measuring voltage and current. Also, a noise elimination algorithm of digital filter was applied to reduce the measurement error caused by external noises as a commercial frequency current. The performance of the RVMS was evaluated by measurement of the step and touch voltage according to the IEEE standard 80 and 81 in a grounding system with a 10 m counterpoise. The result showed that the RVMS analyzes the risk voltage with the error below 5%.