• Advances in aircraft and spacecraft science
• /
• 제1권4호
• /
• pp.455-469
• /
• 2014

High-precision autonomous localization technique is essential for future Mars rovers. This paper addresses an innovative integrated localization algorithm using a multiple information fusion approach. Firstly, the output of IMU is employed to construct the two-dimensional (2-D) dynamics equation of Mars rover. Secondly, radio beacon measurement and terrain image matching are considered as external measurements and included into the navigation filter to correct the inertial basis and drift. Then, extended Kalman filtering (EKF) algorithm is designed to estimate the position state of Mars rovers and suppress the measurement noise. Finally, the localization algorithm proposed in this paper is validated by computer simulation with different parameter sets.

• 한국산업정보학회논문지
• /
• 제19권4호
• /
• pp.41-52
• /
• 2014

본 논문은 O링의 치수 측정에 있어 고가의 대 중형 머신비전 장비를 대체할 수 있는 소형 머신 비전 검사 장비에 기반한 O링 부품 내 외경 측정 알고리즘을 제안한다. 백라이트 조명하에 하나의 CCD 카메라를 이용하여 측정 평면으로 부터 영상을 획득하는 소형 머신 비전 검사장비에 의해 획득된 영상을 제안한 영상처리 기법 알고리즘을 이용하여 O링의 외경 및 내경치수를 측정한다. 치수 측정의 정확도를 높이기 위해 렌즈계 왜곡 보정과 원근 왜곡 보정을 소프트웨어적 기법으로 보정 하였고 O링 형상을 고려하여 타원정합 모델을 적용하였으며 보다 타원 정합의 신뢰성을 높이기 위해 RANSAC알고리즘을 적용하였다.

• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.25-32
• /
• 2017

Most of weapon systems use aided navigation system which integrates inertial navigation and aiding sensors to compensate the INS errors increasing with the passage of time. Various aid sensors can be applied such as Global Navigation Satellite System (GNSS), radar, barometer, etc., but there might exist time delay caused by signal processing or transferring aid information. This time delay leads out-of-sequence measurements (OOSM) systems. Previously, optimal and suboptimal measurment update method for OOSM systems, where the time delay length are known, are proposed. However, previous algorithm does not guarantee the positive definite property of covariance matrix. In order to improve numerical stability for aided navigation using delayed-measurement, this paper proposes a new measurement covariance update algorithm be similar to Joseph-form in Kalman filter. Futhermore, we propose how to implement it in indirect feedback Kalman filter structure, which is commonly used in aided navigation systems, for time-delayed measurement systems. Simulation and vehicle test results show effectiveness of a proposed algorithm.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.141-148
• /
• 2013

There are several problems in the conventional 2-D image processing and 3-D measurement systems. In the case of the 2-D image processing system, it is not possible to detect elevation data. In a 3-D measurement system, it requires a skillful operator and a lot of time for measuring data. Also, there exist data errors depending on operators. The limitation of detecting elevation data in the 2-D image processing system can be solved by laser diodes. In this study an algorithm that measures the accurate data in a subject face to be detected by combining laser diodes and a commercial CCD camera is developed. In the development process, a planar equation is developed using laser diodes and the equation is used to obtain a normal vector. Based on the results, an algorithm that transforms commercial CCD camera coordinates to 3-D coordinates is proposed. The completed measurement method will be applied to replace a manual measurement system for vehicle bodies and parts by an automated system.

• Journal of Platform Technology
• /
• 제6권4호
• /
• pp.26-33
• /
• 2018

In this paper, we propose an image retrieval algorithm for real-time processing and design it as hardware. The proposed method is based on the classification of BoWs(Bag of Words) algorithm and proposes an image search algorithm using bit stream. K-fold cross validation is used for the verification of the algorithm. Data is classified into seven classes, each class has seven images and a total of 49 images are tested. The test has two kinds of accuracy measurement and speed measurement. The accuracy of the image classification was 86.2% for the BoWs algorithm and 83.7% the proposed hardware-accelerated software implementation algorithm, and the BoWs algorithm was 2.5% higher. The image retrieval processing speed of BoWs is 7.89s and our algorithm is 1.55s. Our algorithm is 5.09 times faster than BoWs algorithm. The algorithm is largely divided into software and hardware parts. In the software structure, C-language is used. The Scale Invariant Feature Transform algorithm is used to extract feature points that are invariant to size and rotation from the image. Bit streams are generated from the extracted feature point. In the hardware architecture, the proposed image retrieval algorithm is written in Verilog HDL and designed and verified by FPGA and Design Compiler. The generated bit streams are stored, the clustering step is performed, and a searcher image databases or an input image databases are generated and matched. Using the proposed algorithm, we can improve convenience and satisfaction of the user in terms of speed if we search using database matching method which represents each object.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.21-22
• /
• 2012

• 한국정밀공학회지
• /
• 제33권2호
• /
• pp.121-128
• /
• 2016

The mechanical jointing method is very important in the machine parts and structure. They are used by the bolts and rivet because it is very convenient to replace the parts and the structure. However, the mechanical jointing methods using the bolt and rivet needed the open hole. The machine parts life cycle is reduced because this open hole created the stress concentration. Therefore, the measurement methods are needed to evaluate phenomenon of the stress concentration. This paper discusses the development of the measurement algorithm using the digital image correlation methods to measure the strain distribution of the open hole. To implement the measurement algorithm using the DIC, the LabVIEW 2010 programming tool was used. To measure the strain distribution of the open hole, the tensile specimens having an open hole are made by using the aluminum 6061-T6. To secure the reliability of measurement result using the DIC, the DIC measurement results and FEM analysis results were compared.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.51-54
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Cofired Ceramic (LTCC) technology can be defined as a way to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and / or resistive pastes on. These single green-sheets have to be laminated together and fired in one step all. Main functionality of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used for developing the algorithm. In order to measure the entire film area using several scanning steps, the overlapping method is used. In the process of development of the algorithm based on the image processing and analysis, strong background technology and know-how have been accumulated.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제19권4호
• /
• pp.715-731
• /
• 2005

There are five contexts of division algorithm of fractions such as measurement division, determination of a unit rate, reduction of the quantities in the same measure, division as the inverse of multiplication and analogy with multiplication algorithm of fractions. The division algorithm, however, should be taught by 'dividing by using reciprocals' via 'measurement division' because dividing a fraction by a fraction results in 'multiplying the dividend by the reciprocal of the divisor'. If a fraction is divided by a large fraction, then we can teach the division algorithm of fractions by analogy with 'dividing by using reciprocals'. To achieve the teaching-learning methods above in elementary school, it is essential for children to use the maniplatives. As Piaget has suggested, Cuisenaire color rods is the most efficient maniplative for teaching fractions. The instruction, therefore, of division algorithm of fractions should be focused on 'dividing by using reciprocals' via 'measurement division' using Cuisenaire color rods through analogy if necessary.

• Journal of Information Processing Systems
• /
• 제2권2호
• /
• pp.130-134
• /
• 2006

In the distributed replicating server model, the provision of replicated services will improve the performance of the providing service and efficiency for clients. Efficiently composing the server selection algorithm decreases the retrieval time for replicated data. In this paper, we define the system model that selects and connects the replicated server that provides an optimal service using the server-side downstream measurement and propose a server selection algorithm.