• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.353-365
• /
• 1998

Light absorption coefficient per unit mass of particles, i.e., specific absorption coefficient, is important as one of the main parameters in developing algorithms for ocean color remote sensing. Specific absorption coefficient of chlorophyll ($a^*_{ph}$) and suspended sediment ($a^*_{ss}$) were analyzed with a spectrophotometer using the "wet filter technique" and "Kishino method" for the seawater collected in the Yellow and Mediterranean Sea. An improved data-recovery method for the filter technique was also developed using spectrum slopes. This method recovered the baselines of spectrum that were often altered in the original methods. High $a^*_{ph}({lambda})$ values in the oligotrophic Mediterranean Sea and low values in the Yellow Sea were observed, ranging 0.01 to 0.12 $m^2$/mg at the chlorophyll maximum absorption wavelength of 440 nm. The empirical relationship between $a^*_{ph}$(440nm) and chlorophyll concentrations () was found to fit a power function ($a^*_{ph}$=0.039 $^{-0.369}$), which was similar to Bricaud et al. (1995). Absorption specific coefficients for suspended sediment ($a^*_{ss}$) did not show any relationship with concentrations of suspended sediment. However, an average value of $a^*_{ss}$ ranging 0.005 - 0.08 $m^2$/g at 440nm, was comparable to the specific absorption coefficient of soil (loess) measured by Ahn (1990). The morepronounced variability of $a^*_{ss}$ than $a^*_{ph}$ was determined from the variable mixing ratio values between particulate organic matter and mineral. It can also be explained by a wide size-distribution range for SS which were determined by their specific gravity, bottom state, depth and agitation of water mass by wind in the sea surface.

• Korean Journal of Social Welfare Studies
• /
• no.36
• /
• pp.55-80
• /
• 2008

Research on the welfare state or income inequality has been concerned with variations in inequality between societies or families. These studies tend to view the family as a unit of shared interests where incomes are pooled and distributed equally. This study makes a theoretical and empirical case for why it is important to look at economic dependency within the family in comparative welfare state research. Using the Luxembourg Income Study data this study examined married women's dependency on their husbands' earnings in 16 western industrialized countries. The constructed measure for married women's level of economic dependency followed the procedure of Sørensen & McLanahan(1987), which stated : "her dependency is measured by the extent to which a woman's standard of living(as determined by her share of income) is derived from a transfer from her husband." The finding suggested that married women's economic dependence was lowest in Scandinavian countries. On the contrary, in Southern Europe countries most married women were dependent on husbands' earnings. In Netherlands, Austria, Germany where the share of part-time work among married women was high, married women's economic dependence was also high. This showed the women's labor force participation did not mean that the majority of couples were equal with respect to earnings, nor that a major shift in the sexual division of labour has taken place. This paper analysed the causal relationship between the married women's economic independence and the welfare state by using Ragin(2000)'s Fuzzy-Set Qualitative Comparative Analysis. This analysis considered the various conditions of the welfare state : namely, left power, union mobilization density, women's mobilization, public service sector employment and generous support on the family. The result showed that powerful union, high level of women's mobilization and the generous support on the family were necessary conditions for 'relatively high' level of married women's economic independence.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.665-679
• /
• 2019

Mesoscale soil moisture measurement from the promising Cosmic-Ray Neutron Probe (CRNP) is expected to bridge the gap between large scale microwave remote sensing and point-based in-situ soil moisture observations. Traditional calibration based on $N_0$ method is used to convert neutron intensity measured at the CRNP to field scale soil moisture. However, the static calibration parameter $N_0$ used in traditional technique is insufficient to quantify long term soil moisture variation and easily influenced by different time-variant factors, contributing to the high uncertainties in CRNP soil moisture product. Consequently, in this study, we proposed a modified traditional calibration method, so-called Dynamic-$N_0$ method, which take into account the temporal variation of $N_0$ to improve the CRNP based soil moisture estimation. In particular, a nonlinear regression method has been developed to directly estimate the time series of $N_0$ data from the corrected neutron intensity. The $N_0$ time series were then reapplied to generate the soil moisture. We evaluated the performance of Dynamic-$N_0$ method for soil moisture estimation compared with the traditional one by using a weighted in-situ soil moisture product. The results indicated that Dynamic-$N_0$ method outperformed the traditional calibration technique, where correlation coefficient increased from 0.70 to 0.72 and RMSE and bias reduced from 0.036 to 0.026 and -0.006 to $-0.001m^3m^{-3}$. Superior performance of the Dynamic-$N_0$ calibration method revealed that the temporal variability of $N_0$ was caused by hydrogen pools surrounding the CRNP. Although several uncertainty sources contributed to the variation of $N_0$ were not fully identified, this proposed calibration method gave a new insight to improve field scale soil moisture estimation from the CRNP.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.265-277
• /
• 2019

Using the measured data of waves and shore-line, we reviewed the grand circulation process and seasonal variation of beach cusp at the Mang-Bang beach from the perspective of trapped mode Edge waves known as the driving mechanism of beach cusp. In order to track the temporal and spatial variation trends of beach cusp, we quantify the beach cusp in terms of its wave length and amplitude detected by threshold crossing method. In doing so, we also utilize the spectral analysis method and its associated spectral mean sand wave number. From repeated period of convergence and ensuing splitting of sand waves detected from the yearly time series of spectral mean sand wave number of beach cusp, it is shown that the grand circulation process of beach cusp at Mang-Bang beach are occurring twice from 2017. 4. 26 to 2018. 4. 20. For the case of beach area, it increased by $14,142m^2$ during this period, and the shore-line advanced by 18 m at the northen and southern parts of the Mang-Bang beach whereas the shore-line advanced by 2.4 m at the central parts of Mang-Bang beach. It is also worthy of note that the beach area rapidly increased by $30,345m^2$ from 2017.11.26. to 2017.12.22. which can be attributed to the nature of coming waves. During this period, mild swells of long period were prevailing, and their angle of attack were next to zero. These characteristics of waves imply that the main transport mode of sediment would be the cross-shore. Considering the facts that self-healing capacity of natural beaches is realized via the cross-shore sediment once temporarily eroded. it can be easily deduced that the sediment carried by the boundary layer streaming toward the shore under mild swells which normally incident toward the Mang-Bang beach makes the beach area rapidly increase from 2017.11.26. to 2017.12.22.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.60-61
• /
• 2003

A new approach to reduce the computation time of genetic algorithm (GA) for making binary phase holograms is described. Synthesized holograms having diffraction efficiency of 75.8% and uniformity of 5.8% are proven in computer simulation and experimentally demonstrated. Recently, computer-generated holograms (CGHs) having high diffraction efficiency and flexibility of design have been widely developed in many applications such as optical information processing, optical computing, optical interconnection, etc. Among proposed optimization methods, GA has become popular due to its capability of reaching nearly global. However, there exits a drawback to consider when we use the genetic algorithm. It is the large amount of computation time to construct desired holograms. One of the major reasons that the GA' s operation may be time intensive results from the expense of computing the cost function that must Fourier transform the parameters encoded on the hologram into the fitness value. In trying to remedy this drawback, Artificial Neural Network (ANN) has been put forward, allowing CGHs to be created easily and quickly (1), but the quality of reconstructed images is not high enough to use in applications of high preciseness. For that, we are in attempt to find a new approach of combiningthe good properties and performance of both the GA and ANN to make CGHs of high diffraction efficiency in a short time. The optimization of CGH using the genetic algorithm is merely a process of iteration, including selection, crossover, and mutation operators [2]. It is worth noting that the evaluation of the cost function with the aim of selecting better holograms plays an important role in the implementation of the GA. However, this evaluation process wastes much time for Fourier transforming the encoded parameters on the hologram into the value to be solved. Depending on the speed of computer, this process can even last up to ten minutes. It will be more effective if instead of merely generating random holograms in the initial process, a set of approximately desired holograms is employed. By doing so, the initial population will contain less trial holograms equivalent to the reduction of the computation time of GA's. Accordingly, a hybrid algorithm that utilizes a trained neural network to initiate the GA's procedure is proposed. Consequently, the initial population contains less random holograms and is compensated by approximately desired holograms. Figure 1 is the flowchart of the hybrid algorithm in comparison with the classical GA. The procedure of synthesizing a hologram on computer is divided into two steps. First the simulation of holograms based on ANN method [1] to acquire approximately desired holograms is carried. With a teaching data set of 9 characters obtained from the classical GA, the number of layer is 3, the number of hidden node is 100, learning rate is 0.3, and momentum is 0.5, the artificial neural network trained enables us to attain the approximately desired holograms, which are fairly good agreement with what we suggested in the theory. The second step, effect of several parameters on the operation of the hybrid algorithm is investigated. In principle, the operation of the hybrid algorithm and GA are the same except the modification of the initial step. Hence, the verified results in Ref [2] of the parameters such as the probability of crossover and mutation, the tournament size, and the crossover block size are remained unchanged, beside of the reduced population size. The reconstructed image of 76.4% diffraction efficiency and 5.4% uniformity is achieved when the population size is 30, the iteration number is 2000, the probability of crossover is 0.75, and the probability of mutation is 0.001. A comparison between the hybrid algorithm and GA in term of diffraction efficiency and computation time is also evaluated as shown in Fig. 2. With a 66.7% reduction in computation time and a 2% increase in diffraction efficiency compared to the GA method, the hybrid algorithm demonstrates its efficient performance. In the optical experiment, the phase holograms were displayed on a programmable phase modulator (model XGA). Figures 3 are pictures of diffracted patterns of the letter "0" from the holograms generated using the hybrid algorithm. Diffraction efficiency of 75.8% and uniformity of 5.8% are measured. We see that the simulation and experiment results are fairly good agreement with each other. In this paper, Genetic Algorithm and Neural Network have been successfully combined in designing CGHs. This method gives a significant reduction in computation time compared to the GA method while still allowing holograms of high diffraction efficiency and uniformity to be achieved. This work was supported by No.mOl-2001-000-00324-0 (2002)) from the Korea Science & Engineering Foundation.

• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.44-51
• /
• 2018

The purpose of this study is to present the results as basic data for establishing proper storage conditions and distribution conditions of actual farms at point of increasing concern about hygiene and palatabiltiy of consumers to food. In this study, three farmhouses of dried persimmons prepared using different storage conditions were selected in Sangju (Korea). The dried persimmons were stored for 90 days. Changes in temperature and humidity were measured with a temperature and humidity recorder under each storage condition, and physicochemical analysis and sensory evaluation were performed. The average temperatures of farmhouse A, B and C were approximately $-22--23^{\circ}C$, $-19--18^{\circ}C$ and $-25^{\circ}C$ respectively. The humidities of A, B and C were 62-63%, 59-60%, and 66-67%, respectively, and the moisture contents of all farmhouses increased during the storage period, with farmhouse B showing the most rapid increase. Free sugars increased, except for those from farmhouse C. Persimmons from farmhouse B showed the greatest changes in chewiness and hardness. The values of $a^*$ and $b^*$ were significantly decreased in persimmons from farmhouse B, and the color difference value of farmhouse B was dramatically increased. Sensory evaluation showed that the color preference tended to decrease compared with the initial value. Only farmhouse B showed decreased overall acceptability. Moreover, farmhouse B had the highest storage temperature and lowest humidity. Therefore, our results showed that storage at a low temperature and high humidity was important for manufacturing high-quality dried persimmons.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.50-58
• /
• 2005

Recently, the imaging of geological structures beneath water-covered areas has been in great demand because of numerous tunnel and bridge construction projects on river or lake sites. An electrical resistivity survey can be effective in such a situation because it provides a subsurface image of faults or weak zones beneath the water layer. Even though conventional resistivity surveys in water-covered areas, in which electrodes are installed on the water bottom, do give high-resolution subsurface images, much time and effort is required to install electrodes. Therefore, an easier and more convenient method is sought to find the strike direction of the main zones of weakness, especially for reconnaissance surveys. In this paper, we investigate the applicability of the streamer resistivity survey method, which uses electrodes in a streamer cable towed by ship or boat, for delineating a fault zone. We do this through numerical experiments with models of water-covered areas. We demonstrate that the fault zone can be imaged, not only by installing electrodes on the water bottom, but also by using floating electrodes, when the depth of water is less than twice the electrode spacing. In addition, we compare the signal-to-noise ratio and resolving power of four kinds of electrode arrays that can be adapted to the streamer resistivity method. Following this numerical study, we carried out both conventional and streamer resistivity surveys for the planned tunnel construction site located at the Han River in Seoul, Korea. To obtain high-resolution resistivity images we used the conventional method, and installed electrodes on the water bottom along the planned route of the tunnel beneath the river. Applying a two-dimensional inversion scheme to the measured data, we found three distinctive low-resistivity anomalies, which we interpreted as associated with fault zones. To determine the strike direction of these three fault zones, we used the quick and convenient streamer resistivity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.968-974
• /
• 2010

We assessed the feasibility of discrete wavelet transform (DWT) applied for the spectral processing to enhance the estimation performance quality of soil organic matters using visible-near infrared spectra and mapped their distribution via block Kriging model. Continuum-removal and $1^{st}$ derivative transform as well as Haar and Daubechies DWT were used to enhance spectral variation in terms of soil organic matter contents and those spectra were put into the PLSR (Partial Least Squares Regression) model. Estimation results using raw reflectance and transformed spectra showed similar quality with $R^2$ > 0.6 and RPD> 1.5. These values mean the approximation prediction on soil organic matter contents. The poor performance of estimation using DWT spectra might be caused by coarser approximation of DWT which not enough to express spectral variation based on soil organic matter contents. The distribution maps of soil organic matter were drawn via a spatial information model, Kriging. Organic contents of soil samples made Gaussian distribution centered at around 20 g $kg^{-1}$ and the values in the map were distributed with similar patterns. The estimated organic matter contents had similar distribution to the measured values even though some parts of estimated value map showed slightly higher. If the estimation quality is improved more, estimation model and mapping using spectroscopy may be applied in global soil mapping, soil classification, and remote sensing data analysis as a rapid and cost-effective method.

• Korean Journal of Psychosomatic Medicine
• /
• v.24 no.2
• /
• pp.227-235
• /
• 2016

Objectives : The aims of this study were to know the frequency of cognitive dysfunction among patients with autoimmune thyroid disorders, and to reveal influencing factors on it, especially to clarify association with autoimmune thyroid antibodies. Methods : From sixty-five female patients with autoimmune thyroid disorders, demographic data were obtained by structured interview. Their cognitive funtions were measured using the MMSE-K and the MoCA-K tests. Depression was evaluated by the K-HDRS. Results : 1) Among patients with autoimmune thyroid disorders, 7.69% of them were below 24 on the MMSE-K, while 10.77% were below 22 on the MoCA-K. The frequency of cognitive deficit was not significantly different according to having positivity to antimicrosomal antibodies or not. 2) The antimicrosomal antibody-positive patients had significantly higher antithyroglobulin antibody titers, antimicrosomal antibody titers, and TSH concentration, while had significantly lower free T4 levels(p<0.05, respectively). 3) The total scores of the MMSE-K and the MoCA-K had significant correlation with age, marital status, antithyroglobulin antibody titers and K-HDRS(p<0.05, respectively). 4) The regression analysis revealed that variables such as age, education, autoimmune thyroid antibodies, thyroid function and depression did not influence on cognitive function of patients with autoimmune thyroid disorders. Conclusions : Our results could not support that cognitive function of patients with autoimmune thyroid disorders had correlation with autoimmune thyroid antibodies.

• Korean Journal of Psychosomatic Medicine
• /
• v.24 no.1
• /
• pp.66-73
• /
• 2016

Objectives : The purpose of this study was to investigate the characteristics of psychosocial factors related to functional dyspepsia(FD) and their effects on quality of life(QOL) in firefighters. Methods : This study examined data collected from 1,217 firefighters. We measured psychological symptoms by Patient Health Questionnaire-9(PHQ-9), Generalized Anxiety Disorder questionnaire(GAD-7), Korean Occupational Stress Scale(KOSS), Ways of Coping checklist(WCCL), Rosenberg's Self-Esteem Scale(RSES) and World Health Organization Quality of Life Scale abbreviated version(WHOQOL-BREF). Chi-square test, independent t-test, Pearson's correlation test, logistic regression analysis, and hierarchical regression analysis were used as statistical analysis methods. Results : For the group with FD, the male participants showed significantly higher frequency(p=0.006) compared to the female participants. The group with FD had higher scores for depressive symptoms(p<.001), anxiety (p<.001), and occupational stress(p<.001), and did lower scores for self-esteem(p=.008), quality of life(p<.001) than those without FD. The FD risk was higher in the following KOSS subcategories: job demand(OR 1.94, 95% CI : 1.29-2.93), lack of reward(OR 2.47, 95% CI : 1.61-3.81), and occupational climate(OR 1.51, 95% CI : 1.01-2.24). In the hierarchical regression analysis, QOL was best predicted by depressive symptoms, self-esteem, and occupational stress. Three predictive variables above accounts for 42.0% variance explained of total variance. Conclusions : The psychosocial factors showed significant effects on FD, and predictive variables for QOL were identified based on regression analysis. The results suggest that the psychiatric approach should be accompanied with medical approach in future FD assessment.