• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.118.2-118
• /
• 2001

This research describes a development of laser distance sensor with precise resolution even in the case that the object surface has some curvature. There are typical two methods in measuring the distance by using laser light source, so called time of flight and optic-triangular methods. Both methods have an advantage and a disadvantage each other. In general, the time of flight method produces wide range of the measurement, but low accuracy. The other method is vice versa. In this research, the optic-triangular methods with one-dimensional CCD cell are proposed to obtain the precise distance measure from the sensor the surface of the curved object ...

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.299-302
• /
• 2000

Various types of measuring devices are used for reverse engineering and inspection in different fields of industry such as automotive, aerospace, computer graphics, and home appliance. In order to measure a part easily and efficiently, it is important to select appropriate measuring device considering the characteristics of each measuring machine and part information. In this research, an optimal measuring device selection system using neural networks is proposed. There are two major steps: Firstly, the measuring information such as curvature, normal, type of surface, edge, and facet approximation is extracted from the CAD model. Second, the best suitable measuring device is proposed using the neural network system based on the knowledge of the measuring parameters and the measuring resources. An example of machine selection is implemented to evaluate the performance of the system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.96-101
• /
• 2000

In this paper, an experimental investigation of characteristics of developing transitional steady flows in a square-sectional 180 urved duct is presented. The experimental study is carried out to measure axial velocity profiles by using Laser Doppler Velocimeter (LDV) system. The flow development is found to depend upon Dean number and curvature ratio. For transitional steady flows, the maximum velocity position of axial velocity profiles begins to incline toward the outer wall from $\phi$=$30^{\circ}$bended angle, velocity profiles in center of the duct have lower value than those of the inner and outer walls because of the centrifugal forces.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.95-101
• /
• 2000

To measure springback ratio of thin sheet or plate, winding bend rig is made. It bends a specimen with keeping its curvature constant and measures the bending angles before and after release of bending load. To check the performance of the bend rig, we calculated the bending moment by two ways which are based on simple beam theory. One is that the bending moment is calculated by using the results of bending test, and the other is that the moment is calculated by using the results of tensile tests. The former may entails the effect of the friction between bending pin of the rig and the surface of specimen, but the latter does not contain any effects of the friction since the bending moment is obtained by using tensile tests. Nevertheless, the values of the two bending moment shows the same level of bending moment, which implies that the friction does not influence on the value of springback ratio in spite of the presence of friction within the cope of the test performed in this experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.1
• /
• pp.33-39
• /
• 1999

In this paper an experimenatal investigation of characteristics of developing ransitional steady flows in a square-sectional $180^{\circ}$ curved duct is presented, The experimental study is carried out to measure axial velocity profiles secondary flow velocity profiles and entrance length by using Laser Dopper Velocimeter(LDV) system. The flow development is found to depend upon Dean number and curvature ratio. Of special interest is the secondary flow generated by centrifugal effects in the plane of the cross-section of the duct. The secondary flows becomes strong from $120^{\circ}$ of bended angle on the duct. The entrance length of transitional steady flow is obtained to $120^{\circ}$ of bended angle of the duct in this experimental conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.490-495
• /
• 1996

Though the increment of using computer vision system in modern industry, there are lots of difficulties to measure precisely because of measurement error distortion phenomenon. Among these reasons, the distortion of edge is dominant reason which is occurred by the blurred image. The blurred image is happened when camera can not discriminate its precise focus. To calibrate and generalize distortion phenomenon is important. Thus, we must fix the discrimination criteria which is collected by image recognition of precise focus. Also, radial distortion causes an inward or outward displacement of a given image point from its ideal location. This type of distortion is mainly caused by flawed radial curvature curve of the elements. Thus, we were analyzed the distortion in terms of the changed with lens magnification.

• Journal of ILASS-Korea
• /
• v.4 no.4
• /
• pp.38-45
• /
• 1999

The near field structure of round turbulent jets with initially asymmetric velocity distribution is investigated experimentally. Experiments were carried out using a constant temperature hot-wire anemometry system to measure streamwise velocity in the jets. The measurements were undertaken across the jet at various streamwise stations in a range starting from the jet exit plane and up to a downstream location of twelve diameters. The experimental results include the distribution of mean and instantaneous velocities, vorticity field, turbulence intensity, and the Reynolds shear stress. The asymmetry of the jet exit plane was obtained by using circular cross-section pipes with a bend at the upstream of the exit. Three pipes were used for this study: A straight pipe, 90 and 160 degree-bended pipes. Therefore, at the upstream of the pipe exit, the secondary flow through the bend and the mean streamwise velocity distribution could be controlled by changing the curvature of pipes.

• Journal of Korea Multimedia Society
• /
• v.17 no.10
• /
• pp.1150-1159
• /
• 2014

This paper proposes a method for extracting tissue cells from an organism image by an electron microscope and getting the whole cell number and the area from the cell. In general, the difference between the cell color and the background is used to extract tissue cell. However, there may be a problem when overlapped cells are seen as a single cell. To solve the problem, we split them by using cell size and curvature. This method has a 99% accuracy rate. To measure the cell area, we compute two areas, the inside and boundary of the cell. The inside is simply calculated by the number of pixels. The cell boundary is obtained by applying super sampling, linear interpolation, and cubic spline interpolation. It improves the error rate, 18%, 19%, and 120% respectively, in comparison to the counting method that counts a pixel area as 1.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.234-241
• /
• 1999

Rails have residual stresses produced during manufacturing processes. The residual stresses play all important role on brittle fracture, fatigue strength and derailment by producing cracks in the web of rail. The web saw-cut test is a technique developed to measure the bulk longitudinal residual stress level. It is a simple mettled to estimate a stress intensity factor, $_{4}$ for a web crack by using the radii of curvature of the upper and lower portions of a cut rail. But according to this method, $_{4}$ varies along the rail length because the curvatures along tile rail length vary In this paper, tile residual stress was estimated by Finite Element Method and tile web saw-cut method. In addition tile variation of the residual stress with time was investigated.

• The Research Journal of the Costume Culture
• /
• v.24 no.3
• /
• pp.358-366
• /
• 2016

This study was performed to measure the posture correction effect of wearing ergonomic experimental clothing. Two types of experimental clothing (A, B) were developed. Both of them reinforced the muscles surrounding the spine. Experimental clothing A was developed by reflecting the shape and position of the pectoralis major muscle, abdominal muscle, and latissimus dorsi muscle. Experiment clothing B was developed by reflecting the integrated form of those muscles. Subjects were males in their 20s~30s (n=32). They were divided into two groups based on their acromion distance (AD): the turtle neck syndrome group (n=16, AD=3.81cm) and the normal group (n=16, AD=1.27cm). The correction of body posture was detected by three index values: change of the cervical curvature angle, horizontal distance between the seventh cervical vertebra and tragion, and AD. The comfort and tightness of the clothing were also measured. The results showed that both types of experimental clothing corrected body posture and that turtle neck syndrome can be prevented by wearing these types of posture correcting clothing. Two index values were decreased: cervical curvature angle ($0.31{\sim}1.32^{\circ}$) and horizontal distance between seventh cervical vertebra and tragion (0.22~0.31cm). The chest was also stretched. The comfort was rated as good for both types of experimental clothing. These results indicate that the experimental clothing had a posture correction effect without any discomfort for daily living.