• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.51-55
• /
• 2004

In this study, the levelling and the GPS levelling were carried out with 6 points in 2km${\times}$2km area and the results were analysed. As a result of this research, we had to observe more than 15 minutes to get the height accuracy of 10mm by single frequency GPS receiver in relative surveying. We could not get more better accuracy than 10mm. we could get the height accuracy of within 10mm from observing only more than 5 minutes by double frequency GPS receiver, and of within about 3mm from observing more than 10 minutes. When the number of fixed points is within 3, the level net adjustment result is very close to the one of direct levelling survey. When the number of fixed points is 3, the less the area of triangle the better the adjustment result, and the case of including measure point has more better accuracy than that of non-including measure point.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.856-862
• /
• 2020

Defect inspection system for industrial applications takes the important portion. Non-destructive inspection method has been significantly improved. Infrared thermography, as one of method for non-destructive inspection, can provide relatively precise data and quick inspection time. This study, it was performed to measure defect according to the measurement limit of the non-visible areas such as the back surface of the pipe using reflection plate using reflection plate based on Infrared thermography. The materials of the reflection plate were determined in consideration of the space limitation and the thermal characteristics, and defects were detected by the manufactured reflection plate. Detection of defect in non-visible area using the candidate materials for reflection plate was conducted.

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2013

This paper presents an approach for detecting and measuring human skin pigmentation. In the proposed scheme, we extract a skin area by a Gaussian skin color model that is estimated from the statistical analysis of training images and remove tiny noises through the morphology processing. A skin area is decomposed into two components of hemoglobin and melanin by an independent component analysis (ICA) algorithm. Then, we calculate the intensities of hemoglobin and melanin by using the location histogram and determine the existence of skin pigmentation according to the global and local distribution of two intensities. Furthermore, we measure the area and density of the detected skin pigmentation. Experimental results verified that our scheme can both detect the skin pigmentation and measure the quantity of that and also our scheme takes less time because of the location histogram.

• Journal of Veterinary Clinics
• /
• v.36 no.6
• /
• pp.301-305
• /
• 2019

Wii^® balance board (WBB, Nintendo, Japan) is a device that can measure and record the center of pressure path length (CPPL) and 95% confidence ellipse area (Area 95) in relation to body sway. For evaluating measure of improvement after reconstruction of medial patellar luxation (MPL) in small sized dogs, A total of 6 dogs with limping and lameness gait attributed to Grade II, III or IV MPL were evaluated. Dogs were measured for difference of extension and flexion range of motion in the stifle (dROM), muscle mass, lameness, willingness to bear weight on the affected limb while standing, and willingness to lift the contralateral limb scores, CPPL and Area 95 of WBB on pre-surgery, post-surgery 4, 8 weeks. CPPL was significantly different on pre-surgery compared with post-surgery 8 weeks (p < 0.05). Except for CPPL, measured variables were significantly different on pre-surgery compared with post-surgery 4 and post-surgery 8 weeks (p < 0.01).

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.11-18
• /
• 2013

This paper presents a SFF(shape from focus) algorithm using a new focus measure based on higher order statistics for the exact depth estimation. Since conventional SFF-based 3D depth reconstruction algorithms used SML(sum of modified Laplacian) as the focus measure, their performance is strongly depended on the image characteristics. These are efficient only for the rich texture and well focused images. Therefore, this paper adopts a new focus measure using HOS(higher order statistics), in order to extract the focus value for relatively poor texture and focused images. The initial best focus area map is generated by the measure. Thereafter, the area refinement, thinning, and corner detection methods are successively applied for the extraction of the locally best focus points. Finally, a 3D model from the carefully selected points is reconstructed by Delaunay triangulation.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.621-629
• /
• 2019

A logical measure is suggested to estimate an accurate Sound Speed Profile (SSP) for the unusual variation of salinity in the Yellow Sea. Based on National Aeronautics and Space Administration (NASA)'s Aqua and Soil Moisture Active Passive (SMAP) satellite data, this measure identifies the area of temperature inversion effect and expansion of low salinity (<30.5 psu) water. Subsequently, on the area, the Conductivity, Temperature, and Depth (CTD) mounted unmanned maritime system estimates accurate SSP. In order to carry out this measure conveniently, a flow chart is demonstrated in this research. By using this measure which finds the high variational salinity area, the inaccuracy issue for calculating SSP from Expandable Bathy Thermograph (XBT) is expected to be solved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.112-118
• /
• 2005

In this paper, we propose a new nonlinear matching measure for automatic analysis of the on-off type DNA microarray images in which the hybridized spots are detected by the template matching method. The proposed measure is obtained by binary-thresholding over the whole template region and taking the number of white pixels inside the spotted area. This measure is compared with the normalized covariance in terms of the classification ability of the successfulness of the locating markers. The proposed measure is evaluated for the scanned images of HPV DNA microarrays where the marker locating is a critical issue because of the small number of spots. The targeting spots of HPV DNA chips are designed for genotyping 22 types of the human papilloma virus(HPV). The proposed measure is proven to give more discriminative response reducing the miss cases of the successful marker locating.

• Journal of The Korean Association of Information Education
• /
• v.15 no.3
• /
• pp.439-447
• /
• 2011

In this paper, we developed the application for measure an area that it compute a space coordinate of real object to represent through a camera by using the Orientation sensor of smart devices. The application will help to solve a problems of an epistemological obstacles in an area learning. We conducted an expert evaluation for the application of educative usability, educative effect and etc.. The expert group was comprised of elementary school teacher who teach curriculum of an area in mathematics. In result, it was positively evaluated in terms of educative usability.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.2
• /
• pp.165-171
• /
• 2008

The purpose of this study was to measure tourists' preference for alternative restaurants with different combinations of attribute levels: grown area logo, origin description, traditional food, fusion food, national food, and price. A total of 210 questionnaires were completed. A conjoint experimental method was used to develop hypothetical restaurants, and an ordinal probit model was used to measure the effects of the attribute levels on tourists' preference. The ordinal probit model analysis results for the data indicated an excellent model fit. The effects of the attribute levels on tourists' preferences were statistically significant. As expected, estimates of the marginal willingness to pay were statistically significant Moreover, the tourists were more willing to pay for grown area logo as compared to the other attribute levels. The tourists also considered the grown area logo as a very important attribute. Withe regard to developing and testing conjoint models in the design of choice experiments involving multifactor alternatives, this study may approach a deeper understanding of the conjoint experiment. Greater understanding of the conjoint experiment can improve the managerial diagnoses of the problems as well as the opportunities for different marketing strategies including local branding programs and menu development and marketing communications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.234.1-234.1
• /
• 2014

Many studies have been investigated on high density plasma source (Electron Cyclotron Resonance[ECR], Inductively Coupled Plasma[ICP], Helicon plasma) for large area source after It is announced that productivity of plasma process depends on plasma density. Among them, Some researchers have been studied on multiple sources In this study, we attempted to determine the possibility of multiple inductively coupled plasma (ICP), and helicon plasma sources for large-area processes. Experiments were performed with the one and two coils to measure plasma and electrical parameters, and a circuit simulation was performed to measure the current at each coil in the 2-coil experiment. Based on the result, we could determine the possibility of multiple ICP sources due to a direct change of impedance due to current and saturation of impedance due to the skin-depth effect. However, a helicon plasma source is difficult to adapt to the multiple sources due to the consistent change of real impedance due to mode transition and the low uniformity of the B-field confinement. As a result, it is expected that ICP can be adapted to multiple source for large-area processes.