• Archives of Plastic Surgery
• /
• 제33권1호
• /
• pp.61-66
• /
• 2006

The purpose of this study is to introduce the method of palate repair that combines minimal hard palate dissection and radical retropositiong of levator musculature, which was presented by Sommerlad. As this method presents, additional use of the operating microscope enables atraumatic and radical dissection, and it might provide more improved speech function to the patients. A total of 17 patients with cleft palate underwent Sommerlad's method from December 2003 to August 2004. The mean follow-up period was 4.5 months. The use of a microscope provided high quality variable magnification and good illumination at the operating field. Repair was carried out through incisions at the margins of cleft with mucoperiosteal flap elevation. Muscles were rearranged and repaired properly. It was unable to evaluate the improvement of speech because the patients were too young to learn meaningful speech. Average operating time including anesthetic induction time, V-tube insertion and recovery from anesthesia was 2 hours 45 minutes which was not quite different from conventional method's operating time. Oronasal fistula developed in 2 patients of them. One of them was healed spontaneously. As meticulous and radical muscle dissection was possible with Sommerlad's method, we could minimize the trauma to the muscular and neurovascluar structure. In addition, we expect better faculty of speech as a result of this method although longer follow-up time was unavailable.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.993-999
• /
• 2007

With the introduction of the RAMS(Reliability, Availability, Maintainability, Safety), the interest of the system assurance has been increased. First of all, fast-growing electronic circuit requires analyzing the failure rates, by dividing the signalling system more specifically. Since 2005, the K.N.R (Korean National Railway) has incorporated ERP(Enterprise Resource Planning) in order to establish the complete status as the top international comprise, therefore while ordering the project, it has established the classification system and then has been applying to ERP system in 2007. Due to the complex of the classification system, the reliability analysis of the signalling system was assessed with the limit of IXL ATP with On-board and wayside equipment. This paper assumed MTBF(Mean Time Between Failure), MTTR((Mean Time Between Repair) of total signalling system, by using the classification of ERP program.

• 한국군사과학기술학회지
• /
• 제13권1호
• /
• pp.41-49
• /
• 2010

In this paper, we propose a hierarchical RAM simulation model framework which are used to analyze the RAM specifications on the concept refinement phase. The hierarchical RAM simulation model framework consists of RAM simulation models, class library and each model's input and output data lists. The hierarchical RAM simulation models are co-operated with 3 kinds of model - type I, II, III. Type I, II models are used to analyze the target operational availability and Type III is used to establish the initial RAM specifications. Each model's input and output data lists are defined by considering each model's purpose of RAM analysis. The class library is arranged with each model's classes for implementing the hierarchical simulation models. The proposed framework may be applied for executing the RAM activities effectively.

• 한국CDE학회논문집
• /
• 제20권1호
• /
• pp.36-43
• /
• 2015

Recently, a number of evaluation studies on availability of plant were carried out. This study was conducted to verify of the reliability of a simulation with some variable such as configuration of process, failure probability density function and the number of iteration times for the natural gas liquefaction plant. The error rate of the KICT-RAM solution was evaluated as 0.03~1.79% compared with the result of the MAROS(commercial solution). And the error-rate change was observed in the range of 0.03~1.75 on the condition of the iteration times as 30, 100, 250. As a result the plant availability evaluation approach of KICT-RAM solution was verified as reasonable. However, the careful approach was required to use the solution because the error-rate increased according to iteration times change.

• International Journal of Reliability and Applications
• /
• 제16권2호
• /
• pp.99-111
• /
• 2015

In this paper, we study the reliability analysis of a repairable system with two types of failure in which switching failures and reboot delay are considered. Let units in this system be cold standby, and failure rate and repair rate of [type1, type2] components be exponentially distributed. The expressions of reliability characteristics - such as the system reliability and the mean time to system failure MTTF - are derived. We use several cases to graphically analyze the effect of various system parameters on the system reliability and MTTF. We also perform a sensitivity analysis of the reliability characteristics with changes in specific values of the system's parameters.

• 한국국방경영분석학회지
• /
• 제27권1호
• /
• pp.58-72
• /
• 2001

This research deals with the weapon system RAM which is the reliability, availability and maintainability for weapon systems. This weapon system RAM is one of very important factors because it is related to the life cycle cost and combat readiness of weapon systems. Therefore, in this research we introduce the weapon system RAM and analyze the problems of weapon system RAM management during system life cycle including acquisition period. Finally we suggest an alternative to improve the weapon system RAM in various agencies which are the department of defense and army headquarter level, etc., in the process of defense acquisition.

• Journal of Biosystems Engineering
• /
• 제28권6호
• /
• pp.537-544
• /
• 2003

The objectives of this study were to investigate the failure characteristics of a total of 90 parts of tractor driveline, and to predict their average annual demands required to perform the after-sales service. The failure characteristics such as failure mode, mean time between failures, characteristic life and reliability were analyzed using the data collected through the experienced mechanics at the part centers of the tractor manufacturers. The analysis was based on the assumption that the failure distribution follows the Weibull distribution. The average annual demands were also predicted for the replacement parts using the mean time between failures and the renewal theory based on the Weibull distribution. The results of the study revealed that the driveline parts failure was mostly from wearout and their average characteristic life is about 1.760 hours. The estimated mean time between failures was in a range of 670∼3,740 hours and reliability in a range of 40∼60％. The annual replacement demands were in a range of 4∼45 for a service of 100 tractors.

• Communications for Statistical Applications and Methods
• /
• 제10권1호
• /
• pp.191-202
• /
• 2003

Availability is an important measure of performance of a repairable component. In this paper, the explicit expression for the availability of a repairable component, which is subject to the policy II(Age Replacement Policy) of Barlow and Hunter (1960), is obtained and the existence of the steady state availability is shown. The steady state availabilities of the model are also obtained for the cases when the mean of the minimal repair time is increasing at a geometric rate or linearly increasing, In order to show the importance and the utility of the obtained result, we also consider an illustrative example of the repairable coherent system whose components are repairable, and the obtained results are applied to derive the steady state availability of the whole system. In this situation, we can see that the condition of the existence of the steady state availability for each component is essential. Some remarks on the optimal replacement policy that maximizes the steady state availability are also given.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.154-157
• /
• 2010

In this paper, the Time-varying Failure Rates(TFR) of power distribution system components are extracted from the recorded failure data of KEPCO(Korea Electric Power Corporation) and the reliability of power distribution system is evaluated using Mean Failure Rate(MFR) and TFR. The TFR is approximated to bathtub curve using the exponential and Weibull distribution function. In addition, Kaplan-Meier estimation is applied to TFR extraction because of incomplete failure data of KEPCO. Also the reliability of the real power distribution system of Korea is evaluated using the MFR and TFR extracted from real failure data, respectively and the results of each case are compared with each other. As a result, it is proved that the reliability evaluation using the TFR is more realistic than MFR. In addition, it is presented that the application method at power distribution system maintenance and repair using the result of TFR.

• Advances in pediatric surgery
• /
• 제20권2호
• /
• pp.23-27
• /
• 2014

Purpose: Laparoscopic hernia repair in children is still controversial. The aim of this study was to report our long-term results of the laparoscopic hernia technique, which is based on the same surgical principles as conventional open herniotomy. Methods: Five hundred fourteen pediatric patients with inguinal hernia were included in this study under informed consent. All patients underwent a laparoscopic technique of sac transection and intracorporeal ligation. The asymptomatic contralateral inguinal ring was routinely explored and repaired if a patient had patent processus vaginalis on the contralateral side. Patients were prospectively followed for 5 years. Those who were lost to follow-up were excluded from the study. Perioperative complications and recurrences were evaluated. Results: The mean follow-up period was 29 months. Mean operation time was 27.5 minutes. Forty one percent of the patients had contralateral patent processus vaginalis. Only one hernia recurred (0.19%). We had one case of contralateral metachronous hernia (0.21%) during follow-up period. Conclusion: The long-term follow-up results of our study revealed that laparoscopic hernia sac transection and ligation can be a safe and effective alternative for conventional herniorraphy.