• 대한전자공학회논문지SP
• /
• 제49권1호
• /
• pp.1-10
• /
• 2012

본 논문은 물체 추적에 적합한 새로운 형식의 히스토그램 모델을 제안한다. 제안하는 색상 히스토그램은 양자화 된 각 색상요소에 대해 픽셀의 개수뿐만 아니라 평균 위치 정보 그리고 평균 위치로부터 일정하게 떨어진 영역에 속하는 픽셀들의 색상평균값을 포함한다. 또한 제안하는 히스토그램간의 유사도를 나타내기 위하여 Bhattacharyya 거리를 기본으로 새로운 유사도 함수를 정의하고 mean shift 기법에 적용한다. 기존의 mean shift 기반 기법들과는 달리 본 논문에서 제안하는 알고리즘은 물체 주변 배경 영역에 물체와 비슷한 색상이 존재하더라도 강건한 물체 추적이 가능하다. 실험 결과는 기존 기법들과의 비교를 통하여 개선된 추적 결과를 보여준다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.837-839
• /
• 2014

레이다 시스템에서 3차원 궤적 정보는 목표물 추적을 위해 필수적이다. 이때 3차원 레이다는 수신 신호를 통해 방위각, 고각 및 거리를 추정하여 3차원 궤적 정보를 얻게 된다. 수신 신호에 따라 추정된 각도들과 거리는 오차를 가지게 되며 이 오차의 정도에 따라 3차원 레이다 시스템의 성능에 미치는 영향에 대한 분석이 요구되어진다. 본 논문에서는 3차원 레이다 시스템의 각도 및 거리 오차에 따라 추정된 3차원 궤적 정보와 실제 궤적 정보에 대해 RMSE (Root Mean Square Error)를 통해 성능을 분석한다.

• Journal of Korean Neurosurgical Society
• /
• 제47권5호
• /
• pp.358-364
• /
• 2010

Objective : Morphometric data on dorsal cervical anatomy were examined in an effort to protect the nerve root near the lateral mass during posterior foraminotomy. Methods : Using 25 adult formalin-fixed cadaveric cervical spines, measurements were taken at the lateral mass from C3 to C7 via a total laminectomy and a medial one-half facetectomy. The morphometric relationship between the nerve roots and structures of the lateral mass was investigated. Results from both genders were compared. Results : Following the total laminectomy, from C3 to C7, the mean of the vertical distance from the medial point of the facet (MPF) of the lateral mass to the axilla of the root origin was 3.2-4.7 mm. The whole length of the exposed root had a mean of 4.2-5.8 mm. Following a medial onehalf facetectomy, from C3 to C7, the mean of the vertical distance to the axilla of the root origin was 2.1-3.4 mm, based on the MPF. Mean vertical distances from the MPF to the medial point of the root that crossed the inferior margin of the intervertebral disc were 1.2-2.7 mm. The mean distance of the exposed root was 8.2-9.0 mm, and the mean angle between the dura and the nerve root was significantly different between males and females, at $53.4-68.4^{\circ}$. Conclusion : These data will aid in reducing root injuries during posterior cervical foraminotomy.

• Wind and Structures
• /
• 제32권2호
• /
• pp.127-142
• /
• 2021

Wind load acting on a standalone structure is different from that acting on a similar structure which is surrounded by other structures in close proximity. The presence of other structures in the surrounding can change the wind flow regime around the principal structure and thus causing variation in wind loads compared to a standalone case. This variation on wind loads termed as interference effect depends on several factors like terrain category, geometry of the structure, orientation, wind incident angle, interfering distances etc., In the present study, a three building configuration is considered and the mean pressure coefficients on each face of principle building are determined in presence of two interfering buildings. Generally, wind loads on interfering buildings are determined from wind tunnel experiments. Computational fluid dynamic studies are being increasingly used to determine the wind loads recently. Whereas, wind tunnel tests are very expensive, the CFD simulation requires high computational cost and time. In this scenario, Artificial Neural Network (ANN) technique and Support Vector Regression (SVR) can be explored as alternative tools to study wind loads on structures. The present study uses these data-driven approaches to predict mean pressure coefficients on each face of principle building. Three typical arrangements of three building configuration viz. L shape, V shape and mirror of L shape arrangement are considered with varying interfering distances and wind incidence angles. Mean pressure coefficients (Cp mean) are predicted for 45 degrees wind incidence angle through ANN and SVR. Further, the critical faces of principal building, critical interfering distances and building arrangement which are more prone to wind loads are identified through this study. Among three types of building arrangements considered, a maximum of 3.9 times reduction in Cp mean values are noticed under Case B (V shape) building arrangement with 2.5B interfering distance. Effect of interfering distance and building arrangement on suction pressure on building faces has also been studied. Accordingly, Case C (mirror of L shape) building arrangement at a wind angle of 45º shows less suction pressure. Through this study, it was also observed that the increase of interfering distance may increase the suction pressure for all the cases of building configurations considered.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권1호
• /
• pp.43-48
• /
• 2011

Introduction: This study examined the anatomical morphology of the medial surface of the posterior mandible using 3-dimensional cone-beam computed tomography (CT) images to reduce the number of complications related to dental implant placement. Materials and Methods: Fifty patients were enrolled in this study with an average age (${\pm}$standard deviation) of 44.28 (${\pm}13.05$). On the coronal views cone-beam CT of the first molars, the distance between the top of the canal and alveolar crest vertical distance (VD), the distance between the upper-most point of the canal and the point perpendicular to the lingual cortical margin of the mandible lingual distance (LD), the location of the starting point of VD for reducing from the vertical reference line (VD point), and the inclination of the mandibular medial surface (lingual inclination) were measured, and a statistical evaluation was performed using SPSS for Windows version 15.0. Results: The mean VD0 was $16.91{\pm}2.47\;mm$ and VDx decreased with increasing x value. The mean LD was $5.27{\pm}1.36\;mm$. The VD began to decrease at the mean location of $6.12{\pm}0.96\;mm$ from the vertical reference line. The mean lingual inclination was $1.52{\pm}0.72^{\circ}$. Conclusion: These results will assist in the accurate placement of dental implants and the reduction of complications, particularly in the case of preoperative implant planning using only 2-dimensional imaging methods. (ex. panoramic radiography)

• 한국안광학회지
• /
• 제20권3호
• /
• pp.385-390
• /
• 2015

목적: 본 연구는 원거리 Randot 입체검사(Distance Randot Stereotest, STEREO OPTICAL. Co., Inc. USA)를 이용한 정적 입체시(static stereoacuity)와 삼간계(three-rods test, iNT, Korea)를 이용한 동적 입체시(dynamic stereoacuity)를 평가해보고, 두 입체시의 기준과 상관관계, 두 검사법의 유용성에 대하여 알아보았다. 방법: 평균연령 20.88세(19~32세)인 정상 성인 109명(남자 61명, 여자 48명)을 대상으로 원거리 Randot 입체검사는 검사거리 3 m에서 정적 입체시를, 삼간계는 2.5 m에서 동적 입체시를 측정하였다. 결과: 원거리 정적 입체시는 평균 $155.77{\pm}133.11$초, 동적 입체시는 평균 오차거리 $11.13{\pm}9.69mm$, 등가 환산 입체시 $23.44{\pm}20.96$초로 두 입체시는 통계적으로 유의한 차이가 있었고(p=0.00), 상관성은 비교적 낮았다(${\rho}=0.226$). 동적 입체시의 경우 오차거리 20 mm를 기준으로 정상범위로 구분하였을 때, 97명(89%)에서 20 mm 이하의 오차거리가 나타났고 이들의 평균 오차거리는 $8.43{\pm}5.10mm$, 환산 평균 동적 입체시는 $17.68{\pm}10.67$초였다. 오차거리 20 mm는 등가 환산 동적 입체시 40.99초(PD 62 mm 기준)이다. 결론: 정적 입체시와 동적 입체시의 상관성은 매우 적어 서로 다른 기능으로 구분하여 검사법을 적용하여야 한다. 원거리 Randot 입체검사는 단안단서가 배제된 정적 입체시를, 삼간계는 단안단서가 존재하는 일상생활의 자연시 상태에서 눈과 손의 협응반응이 포함된 동적 입체시를 측정할 수 있어 두 입체시의 기준을 마련하는데 적절하며, 두 검사법을 병행 사용함이 유용하다고 사료된다. 삼간계 동적 입체시는 성인의 정상범위를 오차거리 20 mm를 기준으로 구분하는 것이 통계적인 관점에서 적합하다고 사료된다.

• 사상체질의학회지
• /
• 제4권1호
• /
• pp.107-148
• /
• 1992

The definitions of Four Constitution (Tae-Yang-In, So-Yang-In, Tae-Eum-In, So-Eum-In) in Four-Beginning-Theory (四端論) and Distribution-Theory (擴充論) were morphologically diagrammatized. the method of measuring the five parts came from the diagrams. The five parts are the followings; Top-Line is the distance between Rt. & Lt.Shoulders. Bosom-Line is the horizontal distance passing through the Rt. & Lt.nipples. Stomach-Line is the horizontal distance passing through the Rt. & Lt. acupuncture point Bool-Yong (不容穴). Navel-Line is the horizontal distance passing through the navel. Bottom-Line is the distance between the Rt.& Lt. anterior superior iliac spines. According to it, 311 people were measured in the clinic. Through the measured numerical values, to find out the objective propriety of the morphological diagrammings and the discriminating ability of Four Constitutions by the method of measuring the five, the author tried this study and got the following results. 1. On the ground of the Internal Organs-Theory (臟腑論), the definitions of Four Constitutions were classified and diagrammatized step by step and it was possible to draw the morphological graphs satisfying the reasonable condition objectively. 2. It was found that the graphings by Mean, Standard Deviation and 95% Confidence Interval for mean of the numerical values of five measured parts and the morphological diagrammings of the definitions in Four-Beginning Theory and Distribution-Theory drove to the same figures. 3. Through the method of the Analysis of variance and the Discriminant Analysis, it was discovered that the measured numerical values of five parts could distinguish the Four Constitutions. 4. Tae-Yang-In has the longest Top-Line and the shortest Bottom-Line. The Mean head of Confidence Interval from Top to Bottom is downwardly decreased at the rate of 3.7, 1.5, 1.8, 3.4. 5. So-Yang-In has the longest Top-Line and the shortest Bottom-Line. The Mean head of confidence Interval from Top to Bottom is downwardly decreased at the rate of 2.3, 1.5, 1.5, 1.1. 6. Tae-Eum-In has the longest Navel-Line. The Mean head of Confidence Interval from Navel to Top is upwardly decreased at the rate of 0.5, 0.4, 2.5 and downwardly decreased at the rate of 2.7 between Navel and Bottom. 7. So-Eum-In has the longest Bottom-Line. The Mean head of Confidence Interval from Bottom to Top is upwardly decreased at the rate of 1.1, 1.1, 1.8, 2.3. From the above findings, it was possible to draw the morphological graphings satisfying the objectively reasonable conditions in the definitions of Four-Beginning-Theory and Distribution-Theory and it was proved that the results of the Positive Analysis, carried with the measured numerical values of five parts from the diagramming, could show the objective propriety of the morphological graphings and the discerning ability of Four Constitutions by the method of measuring the five parts.

• 한국산림과학회지
• /
• 제97권6호
• /
• pp.611-616
• /
• 2008

본 연구는 목재수확작업에서 GIS를 이용하여 실제 평균집재거리를 산출하기 위한 과정으로 최단 평균집재거리 계산방법 중에서 포인트그리드방법과 버퍼링방법을 비교분석하기 위하여 국립산림과학원 산림생산기술연구소의 시험림을 대상으로 조사하였다. 조사면적은 264.9 ha, 임도밀도는 32.67 m, 임도간격은 306.1 m였으며, 양방향집재일 경우 임도망보정계수(Kn)는 1.53이고, 이론적인 평균집재거리는 72.52 m로 조사되었다. 포인트그리드방법을 이용한 최단평균집재거리는 149.57 m, 버퍼링방법을 이용한 최단평균집재거리는 139.68 m이며, 집재거리보정계수(Kr)는 2.15, 전체보정계수(Kg)는 3.29이고, 실제평균집재거리는 251.51 m로 산출되었다. 경사도 55% 이하의 완 중경사지에 동양트랙터를 투입할 경우 집재경비는 경사도 25% 이하에서는 11,808원, 25~55%에서는 12,336원으로 계산되었으며, 급경사지역인 경사도 55% 이상에서 Koller 303을 투입할 경우 집재경비는 10,020원으로 계산되었다.

• 환경영향평가
• /
• 제15권1호
• /
• pp.53-65
• /
• 2006

Topographic condition is one of the most important things in farming activities. The topographic condition didn't matter for farming in the past because agricultural products had competitive power in the market. So farmers tried to extend their farms without any concern of topographic condition. We need less labor-consuming farming as industrial structure has been changed and the competitive power of the farming has been getting weak. This study analyzed the fallow potential in agricultural area by topographic condition so that we have got results as follows. Maps of elevation, slope, distance from roads and water resources were made for getting a fallow probability model in farms, and these 4 factors were used as independent variables while a variable on whether it is fallow or not is a dependent variable in logistic regression model. In an analysis of the fallow potential depending on farm land types, the fallow probability in fallow orchard showed the highest value of farm lands, 0.973. Cultivated orchard had 0.730 and upland had 0.616 of the fallow probability. The fields having high fallow potential had high elevation, steep slope, and long distance from water resources and roads. Especially, fields having a probability over 0.99 appeared in orchards, fallow uplands and single cropping uplands, which were recognized to have several disadvantages related to the fallow like as high elevation, steep slope, and long distance from water resources and roads. With the logistic analysis, the suitable farm lands appeared at 16.45m of the mean elevation, 1.89 degree of the mean slope, 39.91m of the average distance from water resources, and 32.39m of the average distance from roads. On the contrary, non-suitable land appeared at 114.7m of the mean elevation, 24.9 degree of the mean slope. The distance from roads was more important variable than the distance from water resources for analyzing suitable farm land.

• 대한기계학회논문집A
• /
• 제29권9호
• /
• pp.1217-1224
• /
• 2005

To improve the accuracy of a metamodel, additional sample points can be selected by using a specified criterion, which is often called sequential sampling approach. Sequential sampling approach requires small computational cost compared to one-stage optimal sampling. It is also capable of monitoring the process of metamodeling by means of identifying an important design region for approximation and further refining the fidelity in the region. However, the existing critertia such as mean squared error, entropy and maximin distance essentially depend on the distance between previous selected sample points. Therefore, although sufficient sample points are selected, these sequential sampling strategies cannot guarantee the accuracy of metamodel in the nearby optimum points. This is because criteria of the existing sequential sampling approaches are inefficient to approximate extremum and inflection points of original model. In this research, new sequential sampling approach using the sensitivity of metamodel is proposed to reflect the response. Various functions that can represent a variety of features of engineering problems are used to validate the sensitivity approach. In addition to both root mean squared error and maximum error, the error of metamodel at optimum points is tested to access the superiority of the proposed approach. That is, optimum solutions to minimization of metamodel obtained from the proposed approach are compared with those of true functions. For comparison, both mean squared error approach and maximin distance approach are also examined.