• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.417-422
• /
• 2011

This paper presents the characteristics of PM eddy current loss and harmonic iron loss for PM step-skewed Interior Permanent Magnet Synchronous Motor (IPMSM) with concentrated windings and multi-layered PM under the running condition of maximum torque per ampere (MTPA) and flux-weakening control. In particular, PM eddy current loss and harmonic iron loss in IPMSM have been numerically computed with three-dimensional Finite Element Analysis (3D FEA), whereby IPMSM with concentrated windings and multi-layered PM has been designed to identify the optimized skew angle contributing to the reduced PM eddy current loss and torque ripples, while maintaining the required average torque. Furthermore, numerical investigation on PM eddy current loss and iron loss at MTPA and flux-weakening control has been carried-out in terms of PM step-skew.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.189-190
• /
• 2017

본 논문에서는 PMSM에서 단위 전류당 최대 토크를 발생시키는 MTPA(Maximum Torque Per Ampere)제어에 기반한 센서리스 V/f 운전 기법을 제안한다. 기존의 센서리스 V/f 운전에서는 MTPA 제어가 고려되지 않아 구동 효율이 감소하는데 본 논문에서는 d축 전류를 기반으로 비례적분기 제어기를 사용하여 개선하였다. 또한 부하 변동에 대한 우수한 동특성과 안정성을 갖도록 하였다. 250W 블로워용 PMSM(Permanent Magnet Synchronous Motor)에 대한 실험을 통해 그 효용성을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.426-427
• /
• 2018

본 논문에서는 철손을 고려한 SPMSM(Surface mounted Permanent Magnet Synchronous Motor)의 모델로부터 출력 토크를 향상시킬 수 있도록 하는 개선된 MTPA(Maximum Torque Per Ampere) 제어 기법을 제안하였다. d축 전류를 0으로 사용하는 SPMSM의 기존 MTPA 제어 방식보다 철손을 고려한 MTPA 전류로 운전하는 제안된 방식이 더 큰 출력 토크를 얻을 수 있음을 800W PMSM에 대한 시뮬레이션을 통해 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.439-440
• /
• 2020

본 논문에서는 PMSM(Permanent Magnet Synchronous Motor)의 구동 효율 향상을 위한 MTPA(Maximum Torque Per Ampere) 제어 기법에 대해 제안한다. 제안된 기법은 전동기의 동손이 최소가 되도록 최적화 기법을 통해 전류각 지령을 조정한다. 제안된 기법을 통해 모든 부하 조건에서 짧은 시간 내에 동손이 최소가 되는 최적 전류각을 추종할 수 있으며, 전동기의 제정수 혹은 위치 측정 오차에 강인하다. 800W IPMSM 구동 실험을 통해 제안된 기법의 효용성을 검증하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.311-315
• /
• 2007

In this paper, a new approach for the Synchronous Reluctance Motor control which ensures producing Maximum Torque per Ampere(MTPA) over the entire field weakening region is presented. In addition, This paper presents a speed sensorless control scheme of SynRM using artificial neural network. Also, by adjusting the base speed for the field weakening operation according to the flux level, the current and voltage limit, the smooth and precise transition into the field weakening operation can be achieved The proposed scheme is verified validity through simulation.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1223-1230
• /
• 2017

The back emf harmonics of a permanent magnet (PM) synchronous motor is a major source of torque ripple. For torque control applications including column fitted MDPS (motor driven power steering) systems, it is essential to reduce the mechanical vibrations due to torque ripples at low speeds. In this paper, a torque ripple reduction algorithm for interior PM synchronous motors is proposed. The harmonic currents that cancel the $6^{th}$ order torque harmonic are added to the nominal dq currents for MTPA (maximum torque per ampere) operation. The compensated harmonic currents are derived from flux linkage harmonics based on a FFT analysis of the back emf harmonics. Simulation and experimental results verify that the $6^{th}$ order torque harmonic and THD of the torque ripple are reduced by compensating the dq harmonic currents.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.54-61
• /
• 2014

This paper proposes a boost/flux-weakening controller (BFWC) for wide speed operation range having engine and interior permanent magnet synchronous generator (IPMSG) for special equipment vehicle. The proposed BFWC exploits direct torque/flux control (DTFC) scheme based on space vector modulation method to control the constant DC voltage output within the entire speed operation range of engine. And, to improve the response characteristics of maximum torque per ampere (MTPA) operation and flux-weakening operation, the MTPA and flux-weakening feed-forward controllers are applied. To estimate feasibility and usefulness of the proposed controller, the simulation and experimental results are compared.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.418-423
• /
• 2011

This paper presents a simulation model and a parameter identification scheme of an induction motor drive for electric vehicle. The induction motor in automotive applications should operate in very high efficiency and achieve the maximum-torque-per-ampere (MTPA) feature even with saturated magnetic flux under very high torque. The indirect vector control which is typically adopted in traction drive system requires precise information of motor parameters, particularly rotor time constants. This work models an induction motor considering magnetic saturation and proposes an empirical identification method using the current controller in the synchronous reference frame. The proposed method is applied to a 22kW-rated induction motor for electric vehicle.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.396-404
• /
• 2010

This paper presents simple schemes used to estimate the initial rotor position and the d- and q-axis inductances for effective Maximum Torque per Ampere (MTPA) operation in a wind-power system using an IPMSM (Interior Permanent Magnet Synchronous Machine). An IPMSM essentially requires an exact coordinate transformation and accurate inductance values to use a reluctance torque caused by the saliency characteristic. In the proposed high-frequency voltage testing method, there is no voltage drop caused by the resistance and the electromotive force. The initial rotor position and the inductance can be measured through an analysis of the stator current without turning the rotor. The experimental results are presented in order to illustrate the feasibility of the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.351-357
• /
• 2010

In this paper, a vector control of the IPMSM drives for the next generation domestic high speed railway system is presented. The applied control method uses one pulse mode field weakening control in constant power region, and maximum torque control per ampere control in constant torque region considering current and voltage limits. An overmodulation control interval is inserted to improve the transient characteristics during transition period of the control modes. Simulation programs based on Matlab/Simulink are developed. Finally the designed system is verified by simulation and their characteristics are analyzed by the simulation results.