• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.671-678
• /
• 2009

This paper presents target operation voltage guidelines of each voltage control area considering both voltage stability and economical efficiency in real power system. EMS(Energy Management System) data, Real-time simulator, shows not only voltage level but lots of information about real power system. Also this paper performs optimal power flow calculation of three objective functions to propose the best target operation voltage. objective function of interchange power flow maximum and active power loss minimization stand for economical efficiency index and reactive power reserve maximum objective unction represents stability index. Then through simulation result using optimazation technique, the most effective objective function is chosen. To sum up, this paper divides voltage control area into twelve considering electric distance characteristics and estimate or voltage level by the passage of time of EMS peak data. And through optimization technique target operation voltage of each voltage control area is estimated and compare heir result. Then it is proposed that the best scenario to keep up voltage stability and maximize economical efficiency in real power system.

• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.143-148
• /
• 2015

Objectives: This study evaluated the maximum depth and percentage of irrigant penetration into dentinal tubules by passive ultrasonic irrigation (PUI). Materials and Methods: Thirty extracted human teeth were instrumented and divided into three groups. According to final irrigation regimen, 5.25% sodium hypochlorite (Group A, NaOCl), 2% chlorhexidine (Group B, CHX) and saline solution (Group C, control group) were applied with Irrisafe 20 tips (Acteon) and PUI. Irrigant was mixed with 0.1% rhodamine B. Sections at 2 mm, 5 mm, and 8 mm from the apex were examined with confocal laser scanning microscopy (CLSM). The percentage and maximum depth of irrigant penetration were measured. Kruskal-Wallis test and Mann-Whitney test were performed for overall comparison between groups at each level and for pairwise comparison, respectively. Within a group, Wilcoxon test was performed among different levels. p values less than 0.05 were considered significant. Results: In all groups, highest penetration depth and percentage of penetration were observed at the 8 mm level. At 2 mm level, Groups A and B had significantly greater depths and percentages in penetration than Group C (p < 0.05), but there were no significant differences between Groups A and B. At 5 mm level, penetration depths and percentage of penetration was not significantly different among the groups. Conclusions: NaOCl and CHX applied by PUI showed similar depth and percentage of penetration at all evaluated levels.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.260-267
• /
• 2016

Considering the effect of dynamic response amplification, a reliability analysis of an offshore wind turbine support structure under an earthquake is presented. A reliability analysis based on the dynamic response requires a large amount of time when using not only a level 3 approach but also level 2 such as a first order reliability method (FORM). Moreover, if a limit state is defined by using the maximum stress at a structural joint where stress concentration occurs, a three-dimensional element should be used in the finite element analysis. This makes the computational load much heavier. To deal with this kind of problem, two techniques are suggested in this paper. One is the application of a quasi-static structural analysis that takes the dynamic amplification effect into account. The other is the use of a stress concentration factor to estimate the maximum local stress. The proposed reliability analysis is performed using a level 2 FORM and verified using a level 3 simulation approach.

• Journal of Family Resource Management and Policy Review
• /
• v.9 no.3
• /
• pp.69-95
• /
• 2005

The purpose of this study was to analyze the needs and demands of middle-aged women concerning the educational contents of tea-culture, the managing methods of educational programs, and a plan to invigorate tea culture education as a whole. Here is the summary of the main results. 1) The need for tea-culture education scored an average of 4.14 / 5(maximum score). The actual needs for tea-culture education had varied according to the women's place of living, educational motives, and the desire to become lecturers in the future. That is, the actual needs for tea-culture education scored high among the groups who displayed strong personal motives to cultivate their inner minds and learn tea-culture seriously, groups who lived in Seoul${\cdot}$Taegu${\cdot}$Cheonju, and groups who wanted to become future lecturers. 2) The need for a systematic management of tea-culture educational programs scored an average of 4.10 / 5(maximum score). The need for a management of tea-culture educational programs varied according to the women's educational level and their desire to become future lecturers. That is, the need for a systematic management of tea-culture educational programs scored high among groups whose educational level was high, and groups who wanted to become future lecturers. 3) The need for a plan to invigorate tea-culture education scored an average of 4.05 / 5(maximum score). The need for a plan to invigorate tea-culture education varied according to the women's place of living, educational level, the managing subject of educational organizations, the desire to become future lecturers. That is, the need for a plan to invigorate tea-culture education scored high among the groups who lived in Seoul${\cdot}$Taegu${\cdot}$Cheonju, groups whose educational level was high, groups who were members of life-long educational facilities within universities, and groups who desired to become future lecturers.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.2
• /
• pp.65-70
• /
• 2005

Evaluation of repetitiveness for upper extremity intensive tasks is essential to determine the level of risk for upper extremity musculoskeletal disorders at the workplace. However, experimental data available to establish the acceptable levels of repetitiveness for various postures and forces is lacking. The present study examined the maximum acceptable frequencies(MAFs; motions/min.) of shoulder, elbow, wrist, and index finger motions at different forces(1kgf and 4kgf for shoulder, elbow, and wrist; 0.25kgf and 1 kgf for index finger) in sitting. Seventeen right-handed males in 20s without having any history musculoskeletal disorders participated in the MAF experiment. The participants determined their MAFs for the upper extremity motions by using the self-adjustment method and their work pulse(increase in heart rate; beats/min.) and rating of perceived exertion(RPE) were measured when working at MAF. The MAFs of elbow, wrist, and index finger motions for each force level were about 2, 3, and 6 times the corresponding MAF(9 at the high force and 24 at the low force) of shoulder motion and the MAFs at the low force increased about 2 times those at the high force. The work pulses of elbow, wrist, and index finger motions for each force level were 70%, 50%, and 30% of the corresponding work pulse(17 at the high force and 12 at the low force) of shoulder motion and the work pulses at the low force were about 70 % of those at the high force. Lastly, the RPEs of the upper extremity regions were about level 3(moderate) or below.

• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.559-566
• /
• 2010

Fifteen lightweight concrete mixes were tested to evaluate the effect of maximum size of coarse aggregate and the replacement level of natural sand on the various properties of fresh lightweight concrete. The different properties, such as water absorption against the elapsed time, pore size distribution and micro-structure of lightweight aggregates used, influencing on the workability of fresh concrete were also measured. Test results showed that the initial slump of lightweight concrete decreased with the increase of the replacement level of natural sand. The slump of all-lightweight concrete sharply decreased by around 80% of the initial slump after 30~60 minutes. The air content and bleeding rate of lightweight concrete were significantly affected by the replacement level of natural sand as well as the maximum size of coarse aggregates. Empirical equations recommended in ACI 211 and Korea concrete standard specifications underestimated the air content of the lightweight concrete, indicating that the underestimation increases with the decrease of the replacement level of natural sand. In addition, equations to predict the air content and bleeding rate of lightweight concrete were proposed based on the test results.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.3
• /
• pp.119-129
• /
• 2004

The surges caused by the typhoon “Maemi” which struck the southern coast of Korea are analysed in Kwangyang Bay on September 12, 2003. The deviations of the high water level were 93∼108 cm and the maximum deviations of the water level (maximum surges) were 176∼196 cm in Kwangyang Bay during the typhoon “Maemi”. The major parameters of the maximum deviations of the water level are as follows: Analysis shows that the pressure drop increased the sea level by 59 cm, the flood of the Sumjin River by 4-5 cm and the external surge propagation and wind setup by 113∼132 cm. During the typhoon “Maemi”, the highest high water recorded in Kwangyang Port (PT3) is 460 cm, which is higher by 5 cm than the highest high water (455 cm) with return period of 100 years estimated in planning the Kwangyang steelworks (POSCO) grounds and higher by 15 cm than the observed highest high water (445 cm) recorded during the typhoon “Thelma” on 1987. Thus, the highest high water caused by the typhoon “Maemi” is higher than the extreme highest high water for the last 20 years in Kwangyang Bay.

• Animal Systematics, Evolution and Diversity
• /
• v.27 no.1
• /
• pp.1-17
• /
• 2011

Thais Roding, 1798, commonly known as rock-shell, is among the most frequently found gastropod genera worldwide on intertidal rocky shores including those of Japan, China, Taiwan and Korea. This group contains important species in many marine environmental studies but species-level taxonomy of the group is quite complicated due to the morphological variations in shell characters. This study examined the genetic variations and relationships among three Korean Thais species based on the partial nucleotide sequences of mitochondrial cox1 gene fragments. Phylogenetic trees from different analytic methods (maximum parsimony, neighbor-joining, and maximum likelihood) showed that T. bronni and T. luteostoma are closely related, indicating the most recent common ancestry. The low sequence divergence found between T. luteostoma and T. bronni, ranging from 1.53% to 3.19%, also corroborates this idea. Further molecular survey using different molecular marker is required to fully understand a detailed picture of the origin for their low level of interspecific sequence divergence. Sequence comparisons among conspecific individuals revealed extensive sequence variations within the three species with maximum values of 2.43% in T. clavigera and 1.37% in both T. bronni and T. luteostoma. In addition, there is an unexpectedly high level of mitochondrial genotypic diversity within each of the three Korean Thais species. The high genetic diversity revealed in Korean Thais species is likely to reflect genetic diversity introduced from potential source populations with diverse geographic origins, such as Taiwan, Hong Kong, and a variety of different coastal regions in South China and Japan. Additional sequence analysis with comprehensive taxon sampling from unstudied potential source populations will be also needed to address the origin and key factors for the high level of genetic diversity discovered within the three Korean Thais species studied.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2013

In this paper, we predicted sea-level rise for RCP 4scenarios(RCP 2.6, RCP 4.5, RCP 6.0, RCP 8.5). To calculate sea-level rise, a semi-empirical method was used and it needs atmospheric temperature rise for each scenario. According to the results, the sea-level has been rising steadily in all scenarios. By 2050 the maximum difference of sea-level rise between the scenarios was within 0.08 m, but its difference was showed more than 0.5 m in 2100. The values of sea-level rise for RCP 2.6, RCP 4.5, RCP 6.0, RCP 8.5 scenarios are 0.87 m, 1.21 m, 1.02 m, 1.36 m, respectively. In the case of RCP 8.5, the slope of atmospheric temperature rise since 2060 was very steep compared to the other scenarios so that the maximum difference of sea-level rise between the scenarios will be much larger after 2100. Estimated by a simple approximation, the maximum difference of sea-level rise can be more than 1.2 m in 2120.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.313-321
• /
• 2009

The relationship between precipitation and groundwater level and the correlation between the moving average of precipitation and goundwater level were analyzed for the Han river watershed in Korean peninsular. Fourteen regions in the watershed were selected and there were somewhat different patterns of seasonal fluctuation of groundwater level data. The groundwater level data tends to decrease in dry spell and increase in wet spell however the range between maximum and minimum values is quite different for each gauging point. We could have stronger correlation between groundwater level for fractured rock aquifer and the moving average of precipitation than the groundwater level for alluvial aquifer. The critical infiltration, which is the maximum daily infiltration averaged throughout watershed, value is turned out to have the range of 10 to 90 mm. We could have stronger correlation when we consider critical infiltration and modify the original precipitation data than we use original precipitation data. We also could have higher correlation coefficient when we consider snowmelt effect for the watershed that has considerable snow event.