• Environmental Engineering Research
• /
• v.21 no.4
• /
• pp.393-400
• /
• 2016

The aim of this study was to evaluate the biomass production and dairy wastewater treatment using Chlorella vulgaris. The results indicated that the maximum percentages of biochemical oxygen demand, chemical oxygen demand, suspended solids, total nitrogen, and total phosphorus removed were 85.61%, 80.62%, 29.10%, 85.47%, and 65.96%, respectively, in dairy effluent at 10 d. A maximum of 1.23 g/L dry biomass was obtained in 7 d. The biomass productivity was strongly influenced by the nutrient reduction in the dairy effluent. The biodiesel produced by the C. vulgaris in the dairy effluent was in good agreement with the American Society of Testing and Materials-D6751 and European Standards 14214 standards. Therefore, using dairy effluent for microalgal cultures could be a useful and practical strategy for an advanced, environmentally friendly treatment process.

• Journal of Marine Bioscience and Biotechnology
• /
• v.8 no.1
• /
• pp.24-29
• /
• 2016

Microalgae are considered as superior biodiesel producers, because they could effectively produce high amount of lipid with fast growth rate. In this study, Chlorella vulgaris was exposed to various light wavelengths (${\lambda}_{max}$ 470 nm, ${\lambda}_{max}$ 525 nm, and ${\lambda}_{max}$ 660 nm) using light emitting diodes (LEDs) to examine effect of light quality on their growth and fatty acid production in 0.4-L bubble column photobioreactors. Fluorescent lamps were also used as polychromatic light sources (control). From the results, biomass productivity was varied by light wavelength from 0.05 g/L/day to 0.30 g/L/day. Maximum biomass productivity was obtained from red LED among tested ones. We also observed that contents of oleic acid and linolenic acid, which affect biodiesel properties, were significantly changed depending on supplied wavelength. These results indicated that production of algal biomass, and fatty acid content and productivity could be improved or controlled by supplying specific light wavelength.

• Korean Journal of Microbiology
• /
• v.20 no.2
• /
• pp.67-72
• /
• 1982

The effect of fermentation temperature on the production of high content alcohol has been investigated with high substrate concentration. The maximum specific growth rate, ${\mu}max\;was\;0.461hr^{-1}\;at\;35^{\circ}C$ which was the highest, whereas the maximum biomass concentration waas 8.7g/l at $25^{\circ}C$, at the growth rate lower than at $35^{\circ}C$. Approximately 140g/l of ethanol was produced in the temperature range of 20 to $25^{\circ}C$ with nearly complete comsumption of the substrate. Extended fermentation time has been required at lower temperatures, however, for the maximum values of biomass concentration and alcohol content, hence higher ethanol productivity, as the temperature was elevated to $40^{\circ}C$. The viability of yeasts was greatly improved by lowering the fermentation temperature down to $25^{\circ}C$ and also extended survival of the cells has been observed at lower fermentation temperatures, although the ethanol concentration of both waas higher.

• The Korean Journal of Ecology
• /
• v.7 no.2
• /
• pp.61-66
• /
• 1983

Seasonal changes of aquatic environmental factors, phytoplankton biomass and primary productivity were investigated in the Jido pond (a phytoplankton proliferating pond) from August 1982 to October 1983. Secchi disc transparency, pH, alkalinity and inorganic nitrogen concentration ranged 24~105cm, 7.5~10.6, 50~175mgCaCO3/l 0.1~4.0mgN/l, respectively. The minimum values of transparency, alkalinity and inorganic nitrogen concentration and the maximum value of pH were obtained during the phytoplankton proliferating season. The phytoplankton biomass changed in the range of 51~1146mgchl/m3 with considerable fluctuations but maintained fairly constant in winter. Themaximum and minimum rates of monthly carbon inflow (net primary production) of the phytoplankton community attained 1190gc/m2 in August 1982 and 68g/m2 in February 1983, respectively. The annual rates of inflow and outflow from August 1982 to July 1983 were 7.384 and 7.396kgc/m2, respectively. Turnover rate of phytoplankton carbon and efficiency of radiation of the phytoplankton community varied in the ranges of 60~130%/day (annual mean, 90%/day) and 0.9~11.2% (annual mean, 6.3%), respectively.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.401-405
• /
• 1995

An open pond type photobioreactor for mass cultivation of S. platensis was designed and the growth parameters from different cultivation processes were compared. 0.30(1/day) of specific growth rate and 1.69(g/$\ell$) of maximum cell density were obtained from batch cultivation. In fed-batch cultivation, specific growth rate and maximum cell density were estimated as 0.22(1/day) and 1.75(g/$\ell$), respectively. Maximum biomass productively from continuous cultivation was obtained as 0.44 (g/$\ell$/day). It proves that an outdoors-mass cultivation of S. platensis considering optimal environmental condition is economically feasible. In addition, the biomass productivity was studied in two different mixing systems such as agitation and air sparging methods. The biomass productivity by an agitation method was better than that in an air sparging method.

• ALGAE
• /
• v.33 no.4
• /
• pp.319-327
• /
• 2018

Ettlia sp. YC001, a highly settleable and productive microalga, was shown to be effective in removing nutrients and capturing suspended solids from eutrophic pond water. The optimum conditions for the Ettlia sp. YC001 cultivation were investigated using water from a landscape pond. The pond water was supplemented with different N : P ratios by weight, and the biomass production and nutrient removal compared in batch cultures. The maximum removal rate of N and P was with an N : P ratio of 16 : 1. Plus, the turbidity dropped to near zero within 4 days. Meanwhile, chemostat cultivation showed that the biomass productivity and nutrient removal rate increased when increasing the dilution rate, where a dilution rate of $0.9d^{-1}$ showed the highest N and P removal rate at $32.4mg\;L^{-1}\;d^{-1}$ and $1.83mg\;L^{-1}\;d^{-1}$, respectively, and highest biomass and lipid productivity at $0.432g\;L^{-1}\;d^{-1}$ and $67.8mg\;L^{-1}\;d^{-1}$, respectively. The turbidity was also reduced by 98% in the chemostat cultivation. Moreover, auto-flocculation and pH were closely connected to the turbidity removal. As a result, this study identified the optimal N : P ratio for small pond water treatment using an Ettlia sp. YC001, while also establishing the optimal conditions for nutrient removal, turbidity reduction, and biomass production.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.3
• /
• pp.378-386
• /
• 2022

Scenedesmus obliquus ABC-009 is a microalgal strain that accumulates large amounts of lutein, particularly when subjected to growth-limiting conditions. Here, the performance of this strain was evaluated for the simultaneous production of lutein and biofuels under three different modes of cultivation - photoautotrophic mode using BG-11 medium with air or 2% CO₂ and heterotrophic mode using YM medium. While it was found that the highest fatty acid methyl ester (FAME) level and lutein content per biomass (%) were achieved in BG-11 medium with CO₂ and air, respectively, heterotrophic cultivation resulted in much higher biomass productivity. While the cell concentrations of the cultures grown under BG-11 and CO₂ were largely similar to those grown in YM medium, the disparity in the biomass yield was largely attributed to the larger cell volume in heterotrophically cultivated cells. Post-cultivation light treatment was found to further enhance the biomass productivity in all three cases and lutein content in heterotrophic conditions. Consequently, the maximum biomass (757.14 ± 20.20 mg/l/d), FAME (92.78 ± 0.08 mg/l/d), and lutein (1.006 ± 0.23 mg/l/d) productivities were obtained under heterotrophic cultivation. Next, large-scale lutein production using microalgae was demonstrated using a 1-ton open raceway pond cultivation system and a low-cost fertilizer (Eco-Sol). The overall biomass yields were similar in both media, while slightly higher lutein content was obtained using the fertilizer owing to the higher nitrogen content.

• Ocean and Polar Research
• /
• v.41 no.4
• /
• pp.311-318
• /
• 2019

We analyzed the preliminary survey data (2014-2016) of macrobenthic community biomass (n = 112) from the wind farm area located in the southern part of the west coast of Korea and compared this data with data from the entire west coast (n = 369; 2006-2008). Modal classes from frequency distributions were 6 times higher in the latter (5 vs. 32 g/㎡). The mean and median values of the latter were 1.3 and 1.7 times higher (mean, 20.7 vs. 27.8 g/㎡; median, 17.1 vs. 29.5 g/㎡), and the maximum value was 3.4 times higher. Mood's median test showed significant difference at p-value = 0.01. We estimated the biomass-to-depth relationships from each data set by using Akaike Information Criterion and regarded the non-overlap of the 95% confidence intervals as indicating significant difference. The biomass was different from a 10 m depth below, and 3 times higher in the west coast at around 20 m compared with the maximum depth of the wind farm area. A local event of catastrophic sedimentation ranging from 1 to 2 m was observed in the wind farm during winter surveys. This could be a probable source of the lower biomass, but information on biomass seasonality and a natural experimental approach seem to be needed for the conduct of further studies. This study is meaningful in that it provided the background to assess future changes by understanding the lower level of benthic productivity in the area. We expect this study will contribute to the preparation of measures that can remove or mitigate the source of the lower biomass and improve the productivity of fishery resources in the area.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.3
• /
• pp.217-223
• /
• 2018

Overfishing capacity has become a global issue due to over-exploitation of fisheries resources, which result from excessive fishing intensity since the 1980s. In the case of Korea, the fishing effort has been quantified and used as an quantified index of fishing intensity. Fisheries resources of coastal fisheries in the Korean waters of the East Sea tend to decrease productivity due to deterioration in the quality of ecosystem, which result from the excessive overfishing activities according to the development of fishing gear and engine performance of vessels. In order to manage sustainable and reasonable fisheries resources, it is important to understand the fluctuation of biomass and predict the future biomass. Therefore, in this study, we forecasted biomass in the Korean waters of the East Sea for the next two decades (2017~2036) according to the changes in fishing intensity using four fishing effort scenarios; $f_{current}$, $f_{PY}$, $0.5{\times}f_{current}$ and $1.5{\times}f_{current}$. For forecasting biomass in the Korean waters of the East Sea, parameters such as exploitable carrying capacity (ECC), intrinsic rate of natural increase (r) and catchability (q) estimated by maximum entropy (ME) model was utilized and logistic function was used. In addition, coefficient of variation (CV) by the Jackknife re-sampling method was used for estimation of coefficient of variation about exploitable carrying capacity ($CV_{ECC}$). As a result, future biomass can be fluctuated below the $B_{PY}$ level when the current level of fishing effort in 2016 maintains. The results of this study are expected to be utilized as useful data to suggest direction of establishment of fisheries resources management plan for sustainable use of fisheries resources in the future.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.458-463
• /
• 2000

Production of acetic acid from cellulosic biomass by Simultaneous Saccharification and Extractive Fermentation (SSEF) was investigated. The homoacetate organism used in this study was a strain of Clostridium thermoaceticum, ATCC # 49707. A batch operation of Simultaneous Saccharification and Fermentation(SSF) using ${\alpha}$-cellulose at pH 5.5 and 55$^{\circ}C$ yielded 40% conversion of cellulose to acetic acid, while a fed-batch SSF operation produced a maximum acetic acid concentration of 25 g/L, with 50% overall yield. In-situ extractive fermentation to reduce the end-product inhibition on both bacteria and enzyme was carried out. in a batch SSEF using 200 g/L IRA-400 resin, acetic acid concentration reached to 23.9 g/L and acetic acid yield and productivity were observed to be 48% and 0.20 g/L-hr, respectively.