• 산업기술연구
• /
• 제32권A호
• /
• pp.9-13
• /
• 2012

In this paper, we investigate maximum transmission capacity of wireless ad-hoc networks. In the investigation, we consider a network topology with regularly located nodes. For the topology, we investigate the maximum transmission capacity with RTS/CTS medium access protocol, and next, we study the maximum transmission capacity without the protocol. We see that the results of our study overall follows the result of Gupta and Kumar's research.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권7호
• /
• pp.2281-2301
• /
• 2014

In wireless ad hoc networks the nodes focus on achieving the maximum SINR for efficient data transmission. In order to achieve maximum SINR the nodes culminate in exhausting the battery power for successful transmissions. This in turn affects the successful transmission of the other nodes as the maximum transmission power opted by each node serves as a source of interference for the other nodes in the network. This paper models the choice of power for each node as a non cooperative game where the throughput of the network with respect to the consumption of power is formulated as a utility function. We propose an adaptive pricing scheme that encourages the nodes to use minimum transmission power to achieve target SINR at the Nash equilibrium and improve their net utility in multiuser scenario.

• 한국정보통신학회논문지
• /
• 제19권2호
• /
• pp.287-292
• /
• 2015

본 논문에서는 사용자들의 밀집도 정보를 기반으로 설정된 목표지역과 릴레이 단말의 수를 제한한 환경에서 광고 확산을 위한 최대 거리 기반 릴레이 단말 선택 알고리즘과 최대 효율 기반 릴레이 단말 선택 알고리즘의 성능을 비교 분석하였다. 최대 거리 기반 릴레이 단말 선택 알고리즘은 단말간의 거리 정보만을 이용하여 릴레이 단말을 선택하고, 최대 효율 기반 릴레이 단말 선택 알고리즘은 설정된 목표지역들을 활용하여 최대 광고 효율을 위한 광고 확산 루트를 설정하였다. 시뮬레이션을 통해 광고를 섹터 수의 변화에 따른 성공적으로 수신한 전체 사용자 수와 전송 효율에 대한 성능을 비교하여, 최대 거리 기반 릴레이 단말 선택 알고리즘 보다 최대 효율 기반 릴레이 단말 선택 알고리즘 성능의 우수성에 대해 분석하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.132-138
• /
• 2000

Complex gear shifting and high speed-reduction ratio reduce the transmission efficiency in power driveline of agricultural tractors. According to a field test, the power transmission efficiency of a tractor in transporting operations was estimated about 70%. However, the actual efficiency was found by the experiment to fluctuate in a range of 56 to 87%. Therefore, the constant efficiency model commonly used for a simulation of power drivelines is not likely to simulate its performance more accurately. In order to predict power transmission efficiency more accurately, a new model was proposed and the new concepts of the maximum efficiency and sticking torque were introduced. The error mean between the measured and the predicted efficiencies was about 2.3% in mean. The new model reflecting the transmission characteristics in the power driveline of tractors could be used to analyze and predict the power transmission performance of tractors more accurately.

• Journal of Communications and Networks
• /
• 제18권1호
• /
• pp.19-26
• /
• 2016

In this paper, the performance of dual-hop multi-relay maximum ratio transmission (MRT) over Rayleigh flat fading channels is studied with both conventional (all relays participate the transmission) and opportunistic (best relay is selected to maximize the received signal-to-noise ratio (SNR)) relaying. Performance analysis starts with the derivation of the probability density function, cumulative distribution function and moment generating function of the SNR. Then, both approximate and asymptotic expressions of symbol error rate (SER) and outage probability are derived for arbitrary numbers of antennas and relays. With the help of asymptotic SER and outage probability, diversity and array gains are obtained. In addition, impact of imperfect channel estimations is investigated and optimum power allocation factors for source and relay are calculated. Our analytical findings are validated by numerical examples which indicate that multi-relay MRT can be a low complexity and reliable option in cooperative networks.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.881-893
• /
• 2000

An analytical synthesis technique for offset slider-rocker 4-bar linkages is devised where transmission angles are used as essential synthesis parameters. Finding the location where both the maximum and the minimum transmission angles arise leads to establishing the algorithm for limiting transmission angles of the slider-rocker linkage which has different offsets according to the direction of the slider. Position analysis by the algorithm gives formula for the dimensional synthesis for the linkage. Application to examples shows that the algorithm and the formula yield proper slider-rocker linkages with regard to limiting transmission angles to the maximum value.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권3호
• /
• pp.246-250
• /
• 1996

In optical soliton transmission systems with nonlinear dispersive materials, which is utilized for ultra-long and high bit rate transmission, it is shown that the value of initial time difference between adjacent solitons is analyzed for optimum bit rate. The method is inducted by uncorrelation condition with minimum interaction forces in initial covariance coefficient between adjacent solitons. When the initial time difference is 6 times of soliton pulse width by the results, it is shown that the reliability is maintained with more than 90% within transmission length of soliton period. multiplied by 93.

• Wind and Structures
• /
• 제21권2호
• /
• pp.241-272
• /
• 2015

In the current study, dynamic and quasi-static analyses were performed to investigate the response of multiple-spanned and single-spanned transmission line conductors under both downburst and synoptic winds considering different wind velocities and different length spans. Two critical downburst configurations, recommended in the literature and expected to cause maximum conductor reactions, were considered in the analyses. The objective of the study was to assess the importance of including the dynamic effect when predicting the conductor's reactions on the towers. This was achieved by calculating the mean, the background and the resonant reaction components, and evaluating the contribution of the resonant component to the peak reaction. The results show that the maximum contribution of the resonant component is generally low (in the order of 6%) for the multiple-spanned system at different wind velocities for both downburst and synoptic winds. For the single-spanned system, the result show a relatively high maximum contribution (in the order of 16%) at low wind velocity and a low maximum contribution (in the order of 6%) at high wind velocity for both downburst and synoptic winds. Such contributions may justify the usage of the quasi-static approach for analyzing transmission line conductors subjected to the high wind velocities typically used for the line design.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2202-2211
• /
• 2016

In certain applications, such as IPT-based EV charger (IPTEC), any variation in alignment and distance between pickup and charger primary leads to a change in leakage and magnetic impedance magnitudes. The power transmission capacity is not always at the maximum level because of these variations. This study proposes a new low-cost tracking method that achieves the Maximum Inductive Power Transmission Capacity (MIPTC). Furthermore, in the proposed method, the exchange of information between load and source is not required. For an application such as IPTEC, the load detected by the IPTEC varies continuously with time because of the change in state of the charge. This load variation causes a significant variation in IPT resonant circuit voltage gain. However, the optimized charging output voltage should be kept constant. From the analysis of the behavior of the IPT circuit at different working frequencies and load conditions, a MIPTC operation point that is independent of load condition can be identified. Finally, the experimental results of a developed prototype IPT circuit test show the performance of the proposed method.

• 한국전자통신학회논문지
• /
• 제7권3호
• /
• pp.567-571
• /
• 2012

장거리 광통신 시스템을 설계하기 위해서는 광섬유의 종류, 광증폭기의 종류, 광증폭기 사이의 거리, 색분산 및 편광모드분산 보상의 방법, 광신호의 세기 등에 대한 결정을 해주어야 한다. 이러한 결정을 하기 위해서는 이러한 시스템의 조건들을 바꾸었을 때에 그 광통신 시스템의 성능을 예측할 수 있어야 한다. 본 논문에서는 광통신 시스템을 설계하였을 때에 그 광통신 시스템의 최대 전송거리를 도출하는 방법에 대해 연구하였다. 또한, 최대 전송거리를 얻기 위한 최적의 광신호 세기를 도출하는 방법에 대해서도 연구하였다.