• 제목/요약/키워드: Maximum Heat Release Rate

검색결과 128건 처리시간 0.027초

주사슬에 Trifluoromethyl 그룹을 갖는 Poly(benzoxazole imide)의 제조 및 난연 특성 (Preparation and Flame Retardancy of Poly(benzoxazole imide) Having Trifluoromethyl Group in the Main Chain)

  • 염진석;최재곤;이창훈
    • Elastomers and Composites
    • /
    • 제47권4호
    • /
    • pp.355-363
    • /
    • 2012
  • 2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane 와 방향족 디이미드-디카르복실산을 thionyl chloride, triethyl amine 및 NMP 하에서 직접 중축합하여 trifluoromethyl group을 포함하는 일련의 poly(hydroxyamide)s(PHAs)를 제조 하였다. PHAs은 $35^{\circ}C$ DMAc 용액에서 0.54-0.96 dL/g의 고유점도를 보였다. 모든 PHAs은 여러 종류의 유기용매에 쉽게 용해되었으나, PBOs은 황산에 부분적으로 용해되는 것을 제외하고, 전혀 용해되지 않았다. PHAs은 열적고리화 반응에 의해서 흡열과 함께 PBOs로 전환되었다. PHAs의 최대 중량손실온도는 $559-567^{\circ}C$의 영역을 보였고, poly(benzoxazole imide)s(PBOs)은 47-59%의 비교적 높은 char 수득율을 보였다. PBOs의 Pyrolysis Combustion Flow Calorimeter(PCFC) 결과에서 12-19 W/g의 HRR 과 2.7-3.6 kJ/g의 total HR을 보였다. PBO 1의 HRR은 PBO 3 의 HRR (19 W/g)보다 37 % 낮은 12 W/g의 가장 낮은 값을 보였다.

TRMM TMI 관측과 태풍 강도와의 관련성 (Relationship between Tropical Cyclone Intensity and Physical Parameters Derived from TRMM TMI Data Sets)

  • 변재영
    • 대한원격탐사학회지
    • /
    • 제24권4호
    • /
    • pp.359-367
    • /
    • 2008
  • 마이크로파 센서로부터 산출된 물리량과 태풍강도와의 관련성을 2004년 6월에서 9월까지 관측된 태풍과 TRMM TMI 자료를 이용하여 조사하였다. TMI 관측으로부터 산출된 85 GHz 밝기온도(TB), 편광보정온도(PCT), 총 수증기량, 얼음, 강우강도, 잠열방출량은 RMSC-Tokyo의 태풍 best-track 데이터베이스의 최대 풍속으로 정의된 태풍강도와 상관분석을 실시하였다 TB와 태풍강도의 최대 상관계수는 태풍 중심으로부터 반경 2.5도 공간평균을 하였을 때 $-0.2{\sim}-0.4$를 나타냈다. 총 수증기량, 강우강도, 잠열방출량과 태풍강도와의 상관계수는 $0.2{\sim}0.4$를 보였다. 태풍 강도 크기에 따른 상관계수 분포는 태풍 발달의 초기 단계에서는 열대성 저기압 중심으로부터 반경 $1.0{\sim}1.5$도 공간 평균을 하였을 때 최대값을 보였으나 태풍이 가장 크게 발달하였을 때는 태풍 중심에서 반경 0.5도의 공간 평균을 하였을 때 최대 상관성이 나타났다. 최대 상관계수를 나타낸 변수와 공간 규모는 회귀분석으로부터 태풍을 강도를 산출할 수 있으며 태풍 Rusa(2002)와 Maemi(2003)에 적용하였다. 태풍 강도의 오차는 태풍 강도 크기를 고려한 85GHz TB와 총 수증기량의 다중 회귀에서 최소를 보였다. 본 연구는 마이크로파 위성 관측의 TB와 총 수중기량으로부터 태풍 강도 산출에 기여할 수 있음을 지시한다.

도로터널에서 수소차 위험에 관한 기초적 연구 (A basic study on the hazard of hydrogen feul cell vehicles in road tunnels)

  • 류지오;이후영
    • 한국터널지하공간학회 논문집
    • /
    • 제23권1호
    • /
    • pp.47-60
    • /
    • 2021
  • 수소는 차세대 에너지원으로서 수소경제 활성화 로드 맵에 따라 수소를 안정적으로 생산·저장·운송하기 위한 산업과 더불어 수소차의 보급이 급속도로 이루어질 것으로 예상된다. 이에 따라 터널과 같은 반밀폐공간에서의 수소차의 사고에 대비한 안전대책이 요구되고 있다. 본 연구에서는 도로터널에서 수소차량의 안전성을 확보하기 위한 연구의 일환으로 터널 내 수소차 사고에 따른 다양한 위험요인 중 가스 누출에 따른 화재와 폭발의 위험성에 대한 기초적인 조사·연구를 수행하였으며, 다음과 같은 결과를 얻었다. 수소차 사고 시 가스누출속도는 TPRD의 오리피스직경에 의존하며, 가스가 점화되는 경우에 최대화재강도는 오리피스직경에 따라 3.22~51.36 MW (오리피스직경: 1~4 mm)에 도달하나 지속시간이 짧기 때문에 화재로 인한 위험의 가중은 거의 없는 것으로 분석되었다. 등가 TNT방법에 의해서 폭발에 따른 과도압력을 계산하였으므로 폭발수율을 0.2적용하는 경우, 안전한계 거리는 대략 35 m 정도로 분석되고 등가사망자는 보수적인 관점에서 수십 명 정도에 달할 것으로 예측된다.

어린이집 화재 시 연기 거동에 관한 실험적 연구 (An Experimental Study of Smoke Movement in a Kindergarten Fire)

  • 이성룡;한동훈
    • 한국화재소방학회논문지
    • /
    • 제27권2호
    • /
    • pp.62-69
    • /
    • 2013
  • 본 연구에서는 어린이집 화재 시 열 및 연기의 거동 특성을 파악하기 위하여 재개발 예정지의 어린이집에서 실험이 실시되었다. 실험대상 어린이집은 2층 구조로 되어있으며, 각 층의 연면적은 252 $m^2$이다. 가연물로는 헵탄 36리터를 사용하였다. 한 변의 길이가 0.8 m인 정사각형 화원을 사용하였으며, 정상상태에서 최대 열방출율은 약 1.7MW이다. 실험동안 연기의 이동 및 온도 변화를 측정하였다. 1층 복도에서, 화재 발생 1분 후 연기가 1.4 m 높이까지 하강하였으며, 화재 발생 약 4분 후 복도 전체가 연기로 가득 찼다. 2층 대부분의 영역에서 온도가 $70^{\circ}C$ 이하로 유지되었으나 실내가 연기로 가득 찼다.

Wiebe 燃燒函數에 의한 디이젤機關 의 燃燒騷音低減 에 관한 硏究 (A Study for Reduction of Combustion Noise in Diesel Engine by Wiebe's Combustion Function)

  • 이성노;궁본등;촌산정;노상순
    • 대한기계학회논문집
    • /
    • 제9권5호
    • /
    • pp.548-554
    • /
    • 1985
  • 본 논문에서는 디이젤기관의 연소소음의 저감을 최종목표로 하여 Wiebe의 연 소함수에 의해 근사시킨 열발생속도의 변화가 디이젤기관의 연소소음 및 도시열효율에 미치는 영향에 관하여 수치실험을 통하여 해석검토하였다.

COMPARATIVE STUDY OF GAS-TO-LIQUID (GTL) AS AN ALTERNATIVE FUEL USED IN A DIRECT INJECTION COMPRESSION IGNITION ENGINE

  • Wu, T.;Huang, Z.;Zhang, W.G.;Fang, J.H.
    • International Journal of Automotive Technology
    • /
    • 제8권4호
    • /
    • pp.421-428
    • /
    • 2007
  • This paper investigates the combustion and emission characteristics of a compression ignition engine fueled with neat and blended Shell's gas-to-liquid (GTL) fuel, which was derived from natural gas through the Fischer-Tropsch process. The experiments were conducted in a 6-cylinder DI diesel engine with pump timing settings of $6^{\circ},\;9^{\circ}\;and\;12^{\circ}$crank angle before TDC over ECE R49 and US 13-mode cycles separately and compared to a conventional diesel fuel. The results show that GTL exhibited almost the same power and torque output, improved fuel economy and effective thermal efficiency. It was found that GTL displayed lower peak in-cylinder combustion pressure and maximum heat release rate (HRR), the timings of the peak pressure and the maximum HRR were generally delayed, and the combustion durations were almost equivalent for diesel and GTL under the same speed-load condition. The results also indicate that, compared to diesel fuel, GTL blends showed a trend forward decreasing four regulated emissions simultaneously and a higher GTL fraction in blends contributing to further reductions in the emissions. In particular and on average, neat GTL significantly reduced HC, CO, NOx and PM by 16.4%, 17.8%, 18.3% and 32.4%, respectively, for all cases.

콘형 가스 스월버너의 3차원 난류 유동장 구조 (The Structure of Three-dimensional Turbulent Flow Fields of a Cone Type Gas Swirl Burner)

  • 김장권;정규조
    • 동력기계공학회지
    • /
    • 제5권2호
    • /
    • pp.22-29
    • /
    • 2001
  • This paper represents axial mean velocity, turbulent kinetic energy and swirl number based on momentum flux measured in the X-Y plane and Y-Z plane respectively of a cone type gas swirl burner by using X-probe from the hot-wire anemometer system. This experiment is carried out at flow rates 350 and $450{\ell}/min$ respectively, which are equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of a subsonic wind tunnel. Axial mean velocities and turbulent kinetic energies show that their maximum values exist centering around narrow slits situated radially on the edge of and in the forefront of a burner until $X/R{\fallingdotseq}1.5$, but they have a peculiar shape like a starfish diffusing and developing into inward and outward of a burner by means of the mixing between flows ejected from narrow slits, an inclination baffle plate and swirl vanes respectively according to downstream regions. Moreover, they show a relatively large value in the inner region of 0.5$S_m$ obtained by integration of velocity profiles shows a characteristic that has an inflection point composing of the maximum and minimum value until X/R<3, but shows close agreement with the geometric swirl number after a distance of X/R=3.

  • PDF

아파트 화재 사례 전산모사를 통한 화재위험성 평가에 관한 연구 (A Study for the Fire Hazard Evaluation through the Fire Simulation of an Apartment Fire Accident)

  • 전흥균;최영상;추홍록
    • 한국화재소방학회논문지
    • /
    • 제24권4호
    • /
    • pp.69-78
    • /
    • 2010
  • 본 연구에서는 FDS 프로그램을 사용하여 아파트 화재 사고에 대한 전산모사를 통하여 화재위험성을 평가하였다. 화재 전산모사 결과, 스프링클러 미 작동 시 최대 열방출율은 7,700kW로써 스프링클러 작동시 최대 열방출율 497kW의 약 16배이며, 화재실의 문 강제 개방 시 역화현상의 발생으로 화재위험은 매우 높게 나타났다. 화재실 온도의 위험도래시간과 감지기 작동 시간에 의한 재실자 피난 여유시간은 최소 32.5초와 최대 53.5초이다. 스프링클러 작동 시에는 냉각에 의한 화재제어로 아파트 실내의 화재위험은 낮아짐을 알 수 있었다. 본 아파트 화재사고의 전산모사 결과를 통하여 소화설비 및 비상방송설비의 정상작동이 화재안전에 얼마나 중요한 역할을 하는지, 그리고 작동 불능 시 얼마나 큰 피해 손실을 초래하는지에 대하여 알 수 있었다.

가스난방기용 스월버너의 3차원 난류유동 특성에 관한 실험적 연구 (An Experimental Study on the Three Dimensional Turbulent Flow Characteristics of Swirl Burner for Gas Furnace)

  • 김장권
    • 대한기계학회논문집B
    • /
    • 제25권2호
    • /
    • pp.225-234
    • /
    • 2001
  • This paper represents the vector fields, three dimensional mean velocities, the turbulent intensities, the turbulent kinetic energy, and the Reynolds shear stresses in the X-Y plane of gas swirl burner with a cone type baffle plate measured by using X-probe from hot-wire anemometer system. This experiment is carried out at flow rates 350 and 450ℓ/min respectively, which are equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of subsonic wind tunnel. The vector plot shows that the maximum axial mean velocity component exists in the narrow slits situated radially on the edge of gas swirl burner, for that reason, there is some entrainment phenomena of ambient air in the outer region of burner. Moreover, mean velocities in the initial region are largely distributed near the outer region of burner at Y/R≒0.97, but they diffuse and develop into the center flow region of burner according to the increase of axial distance. The turbulent intensities and the turbulent kinetic energy due to large inclination of mean velocity and swirl effect show that the maximum value in the initial region of burner is formed in the narrow slits situated radially on the edge of gas swirl burner and large values are mainly formed in the entire region of burner after X/R=2.4358, hence, the combustion reaction is anticipated to occur actively near this region. And the Reynolds shear stresses are also largely distributed from slite to vanes of gas swirl burner in the intial region, but their values largely disappear after X/R=3.2052.

라지스케일 칼로리미터에 의한 멀티시스템형 에어컨실외기의 연소실험에 관한 연구 (A Study on Combustion Experiments of Multi Type Air-Conditioner Outdoor Units by Large Scale Calorimeter)

  • 민세홍;배연준
    • 한국화재소방학회논문지
    • /
    • 제25권6호
    • /
    • pp.168-177
    • /
    • 2011
  • 본 연구에서는 현재 상업용으로 가장 많이 사용되고 있는 멀티시스템형 에어컨실외기의 화재 위험성을 평가하기 위하여 에어컨실외기의 실물 연소실험을 수행하였다. 그 결과 에어컨실외기는 내부 폭발과 상부 배출 그릴을 통한 급격한 화염분출 및 화재확산을 보였으며, 이는 실외기 내부에 내장된 전선, 전자 제어판, 열교환용 동판 및 합성수지류 등의 가연물이 연소하고 냉매가스가 충전된 배관이 가열로 인해 파괴되어 냉매가스가 분출되면서 화재폭발과 외부로 화염분출을 가속시켜 일어난 것이다. 본 실험에서 에어컨실외기의 최고 열방출율은 5,830 kW로 나타났으며, 열화상 카메라 및 열전대에 의해 측정된 실외기의 내부 온도는 최고 $1,201^{\circ}C$이고, 외부온도는 최고 $881^{\circ}C$ 이상, 화염의 길이는 약 5 m 이상 상승하였다. 그러므로 에어컨실외기의 화재는 주변 가연물을 발화시키는 원인으로 작용하여 건축물에 2차 화재를 발생시킴으로써 큰 피해를 줄 수 있을 것으로 판단된다. 이러한 실물실험에서 얻어낸 결과는 향후 컴퓨터시뮬레이션에서 에어컨실외기의 화재구현 및 주변 가연물로의 화재 확산 예측에 적용될 수 있을 것이다.