• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제15권4호
• /
• pp.338-345
• /
• 1993

양성 종양, 악성 종양, 감염, 외상 등에 의한 하악골 결손은 중대한 심미적, 생물학적 결과를 일으킨다. 재건술의 일차적 목적은 완전한 기능 회복이며 이는 이차적으로 심미적 변형의 정상화를 유도한다. 저자들은 1981년에서 1990년까지 서울대학교 치과대학 구강 악안면외과에 내원하여 하악골 재건술을 시행받고 6개월 이상 추적조사가 가능한 61증례의 임상적 자료 및 방사선 검사를 통해 부위별 임상적 성공률을 조사하였다. 본 임상 논문의 목적은 하악골 결손부위와 부위에 따른 유리골 이식의 성공률을 연구하는데 그 의의를 두겠다. 유리골 이식의 임상적 연구를 요약해 보면 유리 자가골 이식의 대부분은 장골이었고 망상피질골이었다. 6개월 이상 추적조사가 가능한 61명의 환자에 있어 전체적 성공률은 80.3% 였다. 강선고정과 구외접근법이 다른 방법보다 그 예후에 있어 훨씬 더 좋은 결과를 나타냈고 다른 부위보다 하악 정중부위가 그 예후에 있어 훨씬 나쁜 결과를 보였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권5호
• /
• pp.380-385
• /
• 2010

Introduction: The iliac crest has been the accepted place to obtain bone for reconstruction in oral and maxillofacial surgery. The iliac crest has many advantages because of its accessibility, large amount of cancellous bone, relative ease of bone harvest, possibility of two team approach and ability to close the wound primarily. This study evaluated retrospectively the morbidity of bone harvesting from the anterior iliac crest to provide a logical guide for recognizing the complications and morbidities of an iliac crest bone graft. Materials and Methods: Fifty healthy patients (mean age of 35.5 years; range 7 to 59) underwent iliac crest bone harvesting for a maxillofacial reconstruction from January 2007 to September 2009 at the Department of Oral and Maxillofacial Surgery in Kyungpook National University Hospital. Age, sex, size and kind of grafted bone, duration of pain on donor site, duration of gait disturbance, sensory deficit, scar, contour defect were measured in each patients by retrospective research. Results: The mean duration of pain is 6.7 days, and mean duration of gait disturbance is 7.2 days. Most patients were free from gait disturbances and pain within 2 weeks and there was no correlation between the size of the harvesting block bone and the duration of gait disturbance or pain. However, this study showed that the duration of pain is associated with gait disturbance. In addition, most patients had no complaints regarding their surgical scar and contour defect, and only one patient had permanent impairment of the sensory function. Moreover, an iliac bone graft did not extend the length of hospitalization. Conclusion: This study suggests that split thickness bone harvesting from the inner table of the anterior iliac crest is a well accepted procedure with relatively low morbidity.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권2호
• /
• pp.142-149
• /
• 2008

The purpose of this study was to evaluate histomorphometrically a toothash - plaster of Paris mixture associated with collagen membrane ($Bio-Gide^{(R)}$), regarding new bone formation in the peri-implantitis defects in dogs. Three mandibular molars were removed from 1-year-old mongrel dogs. After 2 months of healing, 2 titanium implants with sandblasted with large grit and acid etched (SLA) surface were installed in each side of the mandible. Experimental peri-implantitis was induced with ligatures after successful osseointegration. Ligatures were removed after identification of bone defect beneath the level of 5th thread of fixture on radiographic image. The mucoperiosteal flaps were elevated and the contaminated fixtures were treated with chlorhexidine and saline. The bone defects were assigned to one of the following treatments: no guided bone regeneration (GBR) procedure (group 1), GBR with Bio-$Oss^{(R)}$ and Bio-$Gide^{(R)}$ (group 2), or GBR with toothash - plaster of Paris mixture (TPM) and Bio-$Gide^{(R)}$ (group 3). The dogs were sacrificed after 8 or 16 months. The mean percentages of new bone formation within the limits of the 5 most coronal threads were $17.83{\pm}10.69$ (8 weeks) and $20.13{\pm}13.65$ (16 weeks) in group 1, $34.25{\pm}13.32$ (8 weeks) and $36.33{\pm}14.21$ (16 weeks) in group 2, and $46.33{\pm}18.39$ (8 weeks) and $48.00{\pm}17.78$ (16 weeks) in group 3, respectively. The present study confirmed statistically considerable new bone formation within the threads in group 3 compared with group 1 at 8 and 16 weeks (P<0.05). Although, data analysis did not reveal significant differences between group 2 and 3, the latter showed better results during the period of 8 or 16 weeks. Our findings support the effectiveness of TPM as a GBR material in the treatment of peri-implantitis bone defect.

• 대한구순구개열학회지
• /
• 제15권1호
• /
• pp.39-50
• /
• 2012

A submucous cleft palate(SMCP) is characterized by a midline deficiency or lack with/without incorrect positioning of muscular tissues in the soft palate, and by a bony defect in the midline or the center of the hard palate. Velopharyngeal incompetence(VPI) related to this SMCP has been managed by various surgical and prosthetic techniques. Because the individual diagnosis and treatment of SMCP patients was not easy to the speech pathologist and to the maxillofacial reconstructive surgeons, and for the better understanding and for the ideal approaches to the SMCP patients, we reviewed several recent articles about grading system in the SMCP caused by VPI, and summarized in this review article.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권4호
• /
• pp.256-263
• /
• 2002

Using the rat's skull, the study on the biodegradability and guided bone regeneration of the chitosan membrane was performed. The results are as follows: 1. The biodegradability of the chitosan membrane could not be confirmed, but after 12 weeks, this membrane did not yet break into small pieces and there was no specific local tissue reaction. 2. It was not certain whether the pore size of this membrane was affected on osteoblastic activity. 3. After 6 weeks, the bony defect area of rat's skull was not completely filled, but on high magnification it showed that the osteoclasts and the osteoblasts were observed in the regenerating area. In conclusion, the chitosan membrane developed in this study was fit for guided bone regeneration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.40.1-40.7
• /
• 2015

Surgical procedures for parotidectomy had been developed to gain adequate approach, prevent morbidity of nerve, and give esthetic satisfaction. We performed two cases of parotidectomy through facelift incision. One case was reconstructed with superficial musculoaponeurotic system (SMAS) flap and sternocleidomastoid (SCM) muscle rotated flap at the parotid bed. In second case, same procedures were performed, but collagen membrane was additionally implanted for prevention of Frey's syndrome. After surgery, two cases showed esthetic results without neck scar and hollow defect on parotid bed area.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권1호
• /
• pp.86-91
• /
• 2000

Autogenous bone graft is the useful technique for management of various bone defect in oral and maxillofacial surgery. The most common site for bone graft harvest is the anterior iliac crest. There is usually considerable cancellous bone graft available and it can be obtained with minimal morbidity. However, complications noted in iliac crest grafts include prolonged postoperative pain, hematoma and fracture, gluteal muscle weakness. Occasionally, when large amounts of bone graft are needed and previous harvest procedure had used, iliac bone harvest may be not adequate. Like the iliac crest, the greater trochanter has abundant cancellous bone and is readily accessible with acceptable morbidity. The purpose of this study was to assess the availability of cancellous bone graft from the greater trochanter, compare the quantity with that available from the anterior iliac crest, investigate anatomical hazards, and make recommendations for consistent harvest.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.26.1-26.6
• /
• 2016

Background: Xenologous or synthetic graft materials are commonly used as an alternative for autografts for guided bone regeneration. The purpose of this study was to evaluate effectiveness of carbonate apatite on the critical-size bone defect of rat's calvarium. Methods: Thirty-six critical-size defects were created on 18 adult male Sprague-Dawley rat calvaria under general anesthesia. Calvarial bones were grinded with 8 mm in daimeter bilaterally and then filled with (1) no grafts (control, n = 10 defects), (2) bovine bone mineral (Bio-$Oss^{(R)}$, Geistlich Pharma Ag. Swiss, n = 11 defects), and (3) hydroxyapatite ($Bongros^{(R)}$, Bio@ Inc., Seongnam, Korea, n = 15 defects). At 4 and 8 weeks after surgery, the rats were sacrificed and all samples were processed for histological and histomorphometric analysis. Results: At 4 weeks after surgery, group 3 ($42.90{\pm}9.33%$) showed a significant difference (p < 0.05) compared to the control ($30.50{\pm}6.05%$) and group 2 ($28.53{\pm}8.62%$). At 8 weeks after surgery, group 1 ($50.21{\pm}6.23%$), group 2 ($54.12{\pm}10.54%$), and group 3 ($50.92{\pm}6.05%$) showed no significant difference in the new bone formation. Conclusions: $Bongros^{(R)}$-HA was thought to be the available material for regenerating the new bone formation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.18.1-18.9
• /
• 2020

Background: Bone grafting has been considered the gold standard for hard tissue reconstructive surgery and is widely used for large mandibular defect reconstruction. However, the midface encompasses delicate structures that are surrounded by a complex bone architecture, which makes bone grafting using traditional methods very challenging. Three-dimensional (3D) bioprinting is a developing technology that is derived from the evolution of additive manufacturing. It enables precise development of a scaffold from different available biomaterials that mimic the shape, size, and dimension of a defect without relying only on the surgeon's skills and capabilities, and subsequently, may enhance surgical outcomes and, in turn, patient satisfaction and quality of life. Review: This review summarizes different biomaterial classes that can be used in 3D bioprinters as bioinks to fabricate bone scaffolds, including polymers, bioceramics, and composites. It also describes the advantages and limitations of the three currently used 3D bioprinting technologies: inkjet bioprinting, micro-extrusion, and laserassisted bioprinting. Conclusions: Although 3D bioprinting technology is still in its infancy and requires further development and optimization both in biomaterials and techniques, it offers great promise and potential for facial reconstruction with improved outcome.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권2호
• /
• pp.112-123
• /
• 2013

This study aims to investigate the clinical outcome following treatment of peri-implantitis lesions. Five subjects with 7 implants were treated with surgical approach. Four subjects with 6 implants were initially treated with non-surgical approach or hygiene control. However, inflammation was not resolved and more bone loss was found. Therefore, surgical treatment was performed. After surgical exposure of the defect, granulation tissue was removed and implant surface was treated using tetracycline and chlorhexidine. Then, the flaps were sutured. The wound healing was performed in a non-submerged mode. The present finding demonstrates stable results without progression of bone loss. In one subject, deep V shaped bone defect was filled with bone substitute (ICB, CanCellous Bone, Rockey Mountain Tissue Bank, USA), and resorbable membrane (Lyoplant$^{(R)}$, B.Braun Aesculap AG, Germany) was placed over the grafted defect and healing abutment was connected. However, the inflammation was not resolved and more bone loss was found. At one month after regenerative surgery, the implant was removed.