• Title/Summary/Keyword: Maxillofacial bone

Search Result 2,080, Processing Time 0.026 seconds

Retrospective study on survival rate of 2158 osseointegrated implants placed in 770 patients in Sanbon dental hospital of Wonkwang University (원광대학교 산본치과병원에서 770명의 환자에 식립한 2158개의 골유착성 임플란트의 보철 전 초기 생존율에 관한 후향적 연구)

  • Seon, Hwa-Gyeong;Chee, Young-Deok
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.30 no.4
    • /
    • pp.278-288
    • /
    • 2014
  • Purpose: The aim of the study was to evaluate preprosthetic initial survival rate and factors associated with survival of osseointegrated implants placed in edentulous area of maxilla and mandible and to suspect the possible causes leading to failure. Materials and Methods: A total of 2158 endosseous implants that had been inserted between 2004 through 2013 were placed in 770 patients. The clinical comparisons were performed to evaluate implant loss in relation to age and gender of patients, position, system, length and diameter of implant, and bone graft technique. Results: According to position, the survival rates were 98.23% in maxillary anterior site, 96.98% in maxillary posterior site, 97.85% in mandibular anterior site and 98.76% in mandibular posterior site (P < 0.05). According to diameter of implant, the survival rates were 100% under 3.0 mm, 97.09% between 3.0 to 3.5 mm, 98.19% between 3.5 to 4.0 mm and 98.29% between 4.0 to 4.5 mm but relatively lower survival rate was 75% in 5.0 mm-over (P < 0.05). The survival rates of implants were 89.51%, 98.28%, 98.34% and 99.27% in the group with isolated sinus graft, with isolated GBR, with sinus graft and GBR simultaneously and without bone graft, especially (P < 0.05). Conclusion: This study establishes a relationship between survival rate of implant and position, diameter of implant system and bone graft technique. In conclusion, there were low survival rates in maxillary posterior site, in dental implants with wide diameter of 5 mm-over, and in the group with isolated sinus graft.

Three-dimensional finite element analysis of stress distribution for different implant thread slope and implant angulation (임플란트 나사선 경사각과 식립 각도에 따른 3차원 유한요소 응력분석)

  • Seo, Young-Hun;Lim, Hyun-Pil;Yun, Kwi-Dug;Yoon, Suk-Ja;Vang, Mong-Sook
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.51 no.1
    • /
    • pp.1-10
    • /
    • 2013
  • Purpose: The purpose of this study was to find an inclination slope of the screw thread that is favorable in distributing the stresses to alveolar bone by using three dimensional finite element analysis. Materials and methods: Three types modelling changed implant thread with fixed pitch of 0.8 mm is the single thread implant with $3.8^{\circ}$ inclination, double thread implant with $7.7^{\circ}$ inclination and the triple thread implant with $11.5^{\circ}$ inclination. And three types implant angulation is the $0^{\circ}$, $10^{\circ}$ and $15^{\circ}$ on alveolar bone. The 9 modelling fabricated for three dimensional finite element analysis that restored prosthesis crown. The crown center applied on 200 N vertical load and $15^{\circ}$ tilting load. Results: 1. The more tilting of implant angulation, the more Von-Mises stress and Max principal stress is increasing. 2. Von-Mises stress and Max principal stress is increasing when applied $15^{\circ}$ tilting load than vertical load on the bone. 3. When the number of thread increased, the amount of Von-Mises stress, Max principal stress was reduced since the generated stress was effectively distributed. 4. Since the maximum principal stress affects on the alveolar bone can influence deeply on the longevity of the implants. When comparing the magnitude of the maximum principal stress, the triple thread implant had a least amount of stress. This shows that the triple thread implant gave a best result. Conclusion: A triple thread implant to increase in the thread slope inclination and number of thread is more effective on the distribution of stress than the single and double thread implants especially, implant angulation is more tilting than $10^{\circ}$ on alveolar bone. Thus, effective combination of thread number and thread slope inclination can help prolonging the longevity of implant.

THE EFFECTS OF IRRADIATION ON THE PERIODONTAL TISSUES OF RATS WITH THE LOW CALCIUM DIET (방사선조사가 저칼슘식이 백서 치주조직에 미치는 영향에 관한 연구)

  • Choi Mun-Cheol;Lee Sang-Rae
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.22 no.2
    • /
    • pp.223-234
    • /
    • 1992
  • The purpose of this study was to investigate the changes of periodontal tissues in the irradiated mandibular bone in rats which were fed normal diet and low calcium diet In order to carry out this experiment, 64 seven-week old Sprague-Dawley strain rats weighing about 150gms were selected and equally divided into one experimental group of 32 rats and one control group with the remainder. The experimental group and the control group were then subdivided into two groups when the rats reached the age of 10 weeks, 16 rats were allotted for each subdivided group was composed of 16 rats and exposed to irradiation. The two groups were irradiated a single dose of 20Gy on the only jaw area and irradiated with a cobalt-60 teletherapy unit The rats in the control and experimental groups were serially dissected by fours on the 3rd, the 7th, the 14th, and the 21st day after irradiation. After each dissection, both sides of the dead rat mandibular bodies were removed and fixed with 10% neutral formalin. The specimens sectioned and observed in histopathological. histochemical. and immunocellular chemical methods. The obtained results were as follows: 1. In the mandibles of rats with low calcium diet the increased number of fibroblasts of periodontal ligaments. many small capillaries and irregular arrangement of loose collagen fibers were detected and the partial resorption of dentin and cementum could be found by the microscopic studies. 2. In the group of irradiated rats, degenerated periodontal tissues led to the condition of irregular arrangement of collagen fibers and the decreased number of fibroblasts. But this condition was somewhat restored after 21 days of experiment. 3. Periodontal tissues of the irradiated rat group with low calcium diet were destroyed earlier than those of the irradiated rat group with normal diet. Soon this condition was restored and then high cellularity and dense collagen fibers were observed. 4. Many periodontal cells bearing tumor necrosis factor could be clearly observed in the nonirradiated group of rats with normal diet, whereas could not be observed on the 7th day and reappeared on 14th day in the irradiated group of rats with normal diet. A few of them could be observed in the group of rats with low calcium diet, but they could be clearly observed in the both groups after 21 days of experiment.

  • PDF

Effect of Alginate on Early Bone Healing after Implantation of Particulate Dentin and Plaster of Paris Mixture (치아 회분말과 연석고를 이용한 초기 골치유시 알긴산의 효과)

  • Cho, Gyung-Ahn;Kim, Su-Gwan;Lim, Sung-Chul;Kim, Sang-Gon
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.27 no.3
    • /
    • pp.218-225
    • /
    • 2005
  • 본 연구의 목적은 치아 회분말과 연석고 및 알긴산을 혼합하여 이식한 후 초기 골 형성을 알아보는 데 있다. 백서 30마리의 두개골에 8mm 직경의 골결손부를 형성한 후 인간의 치아 회분말과 연석고 및 알긴산을 혼합하여 이식한 후 대조군, 치아 회분말과 연석고 처치군, 그리고 치아 회분말과 연석고 및 알긴산 혼합 처치군에서 각각의 골 결손부 치유과정을 조직병리학적, 조직형태계측학적으로 비교 관찰하였다. 통계학적으로 주간 변화(4주, 8주)는 유의하지 않았고, 각 그룹 간에 있어도 치아 회분말과 연석고 처치군과 치아 회분말과 연석고 및 알긴산 혼합 처치군 간 모두(4주, 8주) 유의한 차이가 없었다. 그러나 이들 치아 회분말과 연석고 처치군과 치아 회분말과 연석고 및 알긴산 혼합 처치군은 대조군에 비해서는 유의하게 우수한 신생골 형성을 보였다. 비록 통계학적으로는 치아 회분말과 연석고 처치군과 치아 회분말과 연석고 및 알긴산 혼합 처치군이 유의한 차이를 보이지 않았지만 치아 회분말과 연석고 및 알긴산 혼합 처치군에서 보다 더 우수한 신생골 형성 경향을 보였다. 뿐만 아니라, 신생골의 내용면에서도 치아 회분말과 연석고 및 알긴산 혼합 처치군에서 좀더 많은 신생 직조골의 융합이나 골 소주형성이 관찰되어 신생골의 형성 및 성숙에 알긴산이 역할을 담당하는 것으로 사료되었다. 결론적으로 골결손부 치료 방법으로 치아 회분말과 연석고 처치군 또는 치아 회분말과 연석고 및 알긴산 혼합 처치로 결손부에 이식하는 것은 신생골 형성의 양적, 질적 개선에 통계학적으로 유의하며, 알긴산을 이식재와 함께 처리한 경우에 신생골 형성의 양적, 질적 개선에 도움을 줄 수 있을 것으로 사료된다.$1^{\circ}C$ 냉수로 세척하고 PETE tray로 포장하여 $4^{\circ}C$로 저장한 경우 깻잎 고유의 초록색과 향을 유지하고 있어 저온냉수 세척과 tray 포장이 세척 청경채의 선도 유지에 효과가 있는 것으로 나타났다.1%,\;pendimethalin\;1.3{\sim}2.9%$ 및 $3.8{\sim}10.8%,\;ethoprophos\;0.6{\sim}2.7%$$0.1{\sim}0.3%$이었다. 인공강우실험 후 공약의 토심별 분포를 살펴 본 결과 alachlor와 ethopropho는 토심 $10{\sim}15cm$까지 이동하였고, ethalfluralin과 pendimethalin는 대부분 토심 5 cm 이내에 잔류하였다. 경사도 30%의 경우가 10%에 비하여 각 농약의 유실량이 $0.2{\sim}1.9$ 배 증가하였는데 유출수에 의한 농약의 유실량 차이는 유출수 중 농도 차이로 판단되며, 유실토양에 의한 농약 유실량 차이는 토양 유실량과 관계되는 것으로 생각되었다. 농약의 강우에 의한 유실은 복잡하게 작용하는 많은 환경적 요인에 의하여 영향을 받지만 정교하게 구성된 환경 시나리오에 의하여 예측 가능할 것으로 판단되었다.고 도라지는 물에 우려 푹 삶았고, 감자, 송이 등은 잘게 썰어 쌀과 함께 밥을 조리하였다. 4. 약선 음식조리방법 약선음식의 재료는 평상시 식생활에 사용되고 있던 식품들의 기능성분과 약이성을 이용하여 만성적인 질병과 급성적인 복통 설사 등에 재료의 전처리를 통해 죽으로 많이 이용하였다. 특히 곡류 등은

Effects of osteotropic hormones on the nitric oxide production in culture of ROS17/12.8 cells (뼈흡수유도호르몬이 ROS17/2.8세포로부터 Nitric Oxide 형성에 미치는 영향)

  • Ko Seon-Yle;Kim Min-Sung;Han Won-Jeong;Kim Se-Won;Kim Jung-Keun
    • Imaging Science in Dentistry
    • /
    • v.35 no.3
    • /
    • pp.127-131
    • /
    • 2005
  • Purpose : We performed the present study to investigate whether osteotropic hormomes play roles on the nitric oxide (NO) production in culture of ROS 17/12.8 osteoblastic cells. Materials and Methods : The osteoblastic cell line ROS17/2.8 cells were cultured In F12 medium supplemented with $5\%$ fetal bovine serum (FBS) at $37^{\circ}C$ in a humidified atmosphere of $5\%\;CO_2$ in air. ROS17/2.8 cells were plated in 96-well plates at a density of $2-3\times10^3cells/well$ and grown to confluence. Then the cells were pretreated with osteotropic hormones (parathyroid hormone (PTH) 20-500 ng/mL, 1, 25-dihydroxycholecalciferol $(1,\;25[OH]_2D_3)$ 1-100 nM; prostaglandin $E_2 (PGE_2)$ 20-500 ng/mL in the medium supplemented with $0.4\%$ FBS for 72 hours and the cells were treated with cytokines $(TNF{\alpha}\;and\;IFN{\gamma})$ in phenol red-free F12 medium for an additional 48 hours. NO synthesis was assessed by measuring the nitrite anion concentration, the reaction product of NO, in the cell culture medium using Griess reagent. Results : PTH and $1,\;25[OH]_2D_3$ pretreatment induced a significant increase in NO production in the presence of $TNF{\alpha}\;and\;IFN{\gamma}.\;PGE_2$ slightly induced NO production compared to the control group. But, $PGE_2$ pretreatment did not affect in NO production in the presence of $TNF{\alpha}\;and\;IFN{\gamma}$. Conclusions : These results suggest that the actions of osteotropic hormones In bone metabolism may be partially mediated by NO in the presence of cytokines.

  • PDF

Benign Tumor-Like Developmental Salivary Gland Defect (양성 종양과 유사한 형태를 가진 발육성 타액선 골결손)

  • An, Seo-Young;Kim, Yong-Gun;Jung, Jae-Kwang
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.28 no.3
    • /
    • pp.301-307
    • /
    • 2012
  • 50-year-old female and 50-year-old male were referred to the department of the oral and maxillofacial surgery of Kyungpook national university dental hospital with asymptomatic lesions on their posterior mandibular body areas. They were discovered incidentally on panoramic radiographs during routine dental examination. Physical examination revealed no remarkable findings. Each panoramic radiograph showed well defined radiolucent lesions without hyperostotic border on their posterior mandibular body area. At first they were diagnosed as benign tumors because they looked like multilocular pattern and one of the patient showed discontinuity of mandibular canal within the lesion. CT scans demonstrated well demarcated and irregular lingual depression filled with fat tissue and they were diagnosed as developmental salivary gland defects. One of the lesion showed no change on follow-up panoramic radiograph after 4 months. Developmental salivary gland defects resembling benign tumor are atypical cases and it is suggested that confirmatory imaging using CT or MRI should be taken.

Accuracy Verification of Optical Tracking System for the Maxillary Displacement Estimation by Using of Triangulation (삼각측량기법을 이용한 광학추적장치의 상악골 변위 계측에 대한 정확성 검증)

  • Kyung, Kyu-Young;Kim, Soung-Min;Lee, Jong-Ho;Myoung, Hoon;Kim, Myung-Jin
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.34 no.1
    • /
    • pp.41-52
    • /
    • 2012
  • Purpose: Triangulation is the process of determining the location of a point by measuring angles to it from known points at either end of a fixed baseline. This point can be fixed as the third point of a triangle with one known side and two known angles. The aim of this study was to find a clinically adaptable method for applying an optical tracking navigation system to orthognathic surgery and to estimate its accuracy of measuring the bone displacement by use of triangulation methods. Methods: In orthognathic surgery, the head position is not fixed as in neurosurgery, so that a head tracker is needed to establish the reference point on the head surface byusing an optical tracking system. However, the operation field is interfered by its bulkiness that makes its clinical use difficult. To solve this problem, we designed a method using an Aquaplast splinting material and a mini-screw in applying a head tracker on a patient's forehead. After that, we estimated the accuracy of measuring displacements of the ball marker by an optical tracking system with a conventional head tracker (Group A) and with a newly designed head tracker (Group B). Measured values of ball markers' displacements by each optical tracking system were compared with values obtained from fusion CT images for an estimation of accuracy. Results: The accuracy of the optical tracking system with a conventional head tracker (Group A) is not suitable for clinical usage. Measured and predictable errors are larger than 10 mm. The optical tracking system with a newly designed head tracker (Group B) shows 1.59 mm, 6.34 mm, and 9.52 mm errorsin threeclinical cases. Conclusion: Most errors were brought on mainly from a lack of reproducibility of the head tracker position. The accuracy of the optical tracking system with a newly designed head tracker can be a useful method in further orthognathic navigation surgery even though the average error is higher than 2.0 mm.

Effect of microgrooves and fibronectin conjugation on the osteoblast marker gene expression and differentiation

  • Park, Su-Jung;Leesungbok, Richard;Ahn, Su-Jin;Im, Byung-Jin;Lee, Do Yun;Jee, Yu-Jin;Yoon, Joon-Ho;Cui, Taixing;Lee, Sang Cheon;Lee, Suk Won
    • The Journal of Advanced Prosthodontics
    • /
    • v.7 no.6
    • /
    • pp.496-505
    • /
    • 2015
  • PURPOSE. To determine the effect of fibronectin (FN)-conjugated, microgrooved titanium (Ti) on osteoblast differentiation and gene expression in human bone marrow-derived mesenchymal stem cells (MSCs). MATERIALS AND METHODS. Photolithography was used to fabricate the microgrooved Ti, and amine functionalization (silanization) was used to immobilize fibronectin on the titanium surfaces. Osteoblast differentiation and osteoblast marker gene expression were analyzed by means of alkaline phosphatase activity assay, extracellular calcium deposition assay, and quantitative real-time PCR. RESULTS. The conjugation of fibronectin on Ti significantly increased osteoblast differentiation in MSCs compared with non-conjugated Ti substrates. On the extracellular calcium deposition assays of MSCs at 21 days, an approximately two-fold increase in calcium concentration was observed on the etched 60-${\mu}m$-wide/10-${\mu}m$-deep microgrooved surface with fibronectin (E60/10FN) compared with the same surface without fibronectin (E60/10), and a more than four-fold increase in calcium concentration was observed on E60/10FN compared with the non-etched control (NE0) and etched control (E0) surfaces. Through a series of analyses to determine the expression of osteoblast marker genes, a significant increase in all the marker genes except type I collagen ${\alpha}1$ mRNA was seen with E60/10FN more than with any of the other groups, as compared with NE0. CONCLUSION. The FN-conjugated, microgrooved Ti substrate can provide an effective surface to promote osteoblast differentiation and osteoblast marker gene expression in MSCs.

A case of unexpected adjacent tooth extrusion after implant fixed prosthetic treatment, who had undergone mandibular resection and reconstruction due to ameloblastoma (법랑모세포종으로 하악골 절제 및 재건술 시행한 환자에서 임플란트 고정성 보철물 수복 후 원인 미상의 인접 치아 정출이 발생한 증례 및 고찰)

  • Kim, Su-Jin;Ha, Tae-Wook;Kim, Hyung Jun;Kim, Jee Hwan
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.57 no.4
    • /
    • pp.448-455
    • /
    • 2019
  • Ameloblastoma is a benign odontogenic epithelial tumor with high recurrence rate and requires extensive resection of the surrounding tissue and reconstruction of defect site. Because of the anatomical limitation of the reconstruction site, prosthetic treatment with implants is the first recommendation. This is a case of prosthetic restoration of the reconstruction site with implant fixed prosthesis in patient who underwent mandibular resection and iliac bone reconstruction due to ameloblastoma. However 14 months after completion of implant prosthesis, adjacent natural tooth erupted unexpectedly, resulting in 1mm infra-occlusion occurred including posterior implant prosthesis and anterior natural teeth. In adults, implant infra-occlusion may occur due to residual growth after placement of the maxillary anterior implant. But this case, hypo-occlusion of molar implant and open bite of anterior natural teeth is occurred due to extrusion of adjacent tooth, is rare. Thus we report the treatment process including orthodontic treatment with intrusion of the posterior tooth, and investigate the causes of sudden, unexpected tooth extrusion.

Correlation between magnetic resonance imaging and cone-beam computed tomography for maxillary sinus graft assessment

  • Laurino, Fernando Antonio Reis;Choi, Isabela Goulart Gil;Kim, Jun Ho;Gialain, Ivan Onone;Ferraco, Renato;Haetinger, Rainer Guilherme;Pinhata-Baptista, Otavio Henrique;Abdala-Junior, Reinaldo;Costa, Claudio;Cortes, Arthur Rodriguez Gonzalez
    • Imaging Science in Dentistry
    • /
    • v.50 no.2
    • /
    • pp.93-98
    • /
    • 2020
  • Purpose: Little is known regarding the accuracy of clinical magnetic resonance imaging (MRI) protocols with acceptable scan times in sinus graft assessment. The aim of this study was to evaluate the correlations between MRI and cone-beam computed tomographic (CBCT) measurements of maxillary sinus grafts using 2 different clinical MRI imaging protocols. Materials and Methods: A total of 15 patients who underwent unilateral sinus lift surgery with biphasic calcium phosphate were included in this study. CBCT, T1-weighted MRI, and T2-weighted MRI scans were taken 6 months after sinus lift surgery. Linear measurements of the maximum height and buccolingual width in coronal images, as well as the maximum anteroposterior depth in sagittal images, were performed by 2 trained observers using CBCT and MRI Digital Imaging and Communication in Medicine files. Micro-computed tomography (micro-CT) was also performed to confirm the presence of bone tissue in the grafted area. Correlations between MRI and CBCT measurements were assessed with the Pearson test. Results: Significant correlations between CBCT and MRI were found for sinus graft height (T1-weighted, r=0.711 and P<0.05; T2-weighted, r=0.713 and P<0.05), buccolingual width (T1-weighted, r=0.892 and P<0.05; T2-weighted, r=0.956 and P<0.05), and anteroposterior depth (T1-weighted, r=0.731 and P<0.05; T2-weighted, r=0.873 and P<0.05). The presence of bone tissue in the grafted areas was confirmed via micro-CT. Conclusion: Both MRI pulse sequences tested can be used for sinus graft measurements, as strong correlations with CBCT were found. However, correlations between T2-weighted MRI and CBCT were slightly higher than those between T1-weighted MRI and CBCT.