• Journal of Periodontal and Implant Science
• /
• 제49권1호
• /
• pp.47-57
• /
• 2019

Purpose: This study was designed to observe the resorption pattern of biphasic calcium phosphate (BCP) used for maxillary sinus augmentation over a 3- to 6-year healing period, and to investigate factors affecting the resorption of BCP. Methods: A total of 47 implants placed in 27 sinuses of 22 patients were investigated. All patients had residual bone height less than 5 mm at baseline. The modified Caldwell-Luc approach was used to elevate the maxillary sinus membrane, and the sinus cavity was filled with BCP (70% hydroxyapatite and 30% ${\beta}$-tricalcium phosphate). Implant placement was done simultaneously or in a staged manner. Serial radiographic analysis was performed up to 6 years postoperatively. Results: During the follow-up period, no implant loss was reported. The mean reduced height of the augmented sinus (RHO) was $0.27{\pm}1.08mm$ at 36 months, and $0.89{\pm}1.39mm$ at 72 months postoperatively. Large amounts of graft material (P=0.021) and a long healing period (P=0.035) significantly influenced the amount of RHO. In particular, there was a significant relationship between a healing period longer than 40 months and RHO. Conclusions: BCP can achieve proper dimensional stability with minimal reduction of the graft height in a 3- to 6-year healing period after maxillary sinus augmentation. The healing period and the amount of graft material influenced the resorption of BCP.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.567-577
• /
• 2006

Background Several bone grafting materials have been used in sinus augmentation procedures. Macroporous Biphasic Calcium Phosphate($MBCP^{TM}$) consists of the mixture of 60% HA and 40% ${\beta}-TCP$. Therefore, it can provide good scaffold for the new bone to grow owing to HA, in the other hand, it can have bioactivity for bone remodeling owing to ${\beta}-TCP$. The purpose of this study was to evaluate bone formation following maxillary sinus augmentation using $MBCP^{TM}$ by means of histologic analysis. Material and Method $MBCP^{TM}$ was placed as a primary bone substitute for maxillary sinus augmentation. Three patients were selected after evalaution of their medical dental examination. $MBCP^{TM}$ only, $MBCP^{TM}$ combined with Irradicated cancellous bone and $MBCP^{TM}$ combined with autogenous bone were used for each patient. After about eight months, bone biopsies were harvested for histologic evaluation and fixtures installed. Results Eight months after surgery we observed new vital bone surrounding $MBCP^{TM}$ particle and the amount of new bone was about 30% even though there were discrepancies between specimens. This case report documents that $MBCP^{TM}$ when used as a grafting material for sinus floor augmentation whether combined other bone graft material or not, may lead to the predictable results for dental implants on posterior maxillary area with insufficient vertical height for fixture installation.

• 대한치과의사협회지
• /
• 제48권1호
• /
• pp.45-55
• /
• 2010

Purpose: The aim of this study was to evaluate 1 year cumulative survival rate of implants placed on augmented sinus using Osteon$^{(R)}$, bone graft material and to assess height of the grafted material radiographically. Material and Methods: 10 maxillary sinuses were augmented in 10 patients and 25 implant fixtures were installed simultaneously or after 6 months healing period. The height of the sinus graft material was measured using panoramic images immediately after augmentation and up to 19 months subsequently. Changes in the height of the sinus graft material were calculated with respect to implant length and original sinus wall height. Results: The cumulative survival rate was 100% in all 25 implants. Additionally, normal healing process without any complication was observed in all patients. The mean crown/Implant ratio was 1.25. The mean marginal bone loss was 0.95mm and the mean resorption rate of Osteon$^{(R)}$ was 0.05mm/month. The fastest resorption site of Osteon$^{(R)}$ is the first molar area. The grafted material was well maintained in sinus and decreased slightly over 1 year. Conclusion: In conclusion, It can be suggested that Osteon$^{(R)}$ may have predictable result when it was used as a grafting material for sinus floor augmentation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권4호
• /
• pp.146-153
• /
• 2014

Purpose: This study compares and evaluates the efficacy of graft materials after maxillary sinus bone grafts with autogenous tooth bone graft material (AutoBT), demineralized freeze-dried bone allograft (DFDBA) and deproteinized bovine bone mineral (DBBM). Methods: The study involved 30 sinuses in 26 patients who visited the Division of Oral and Maxillofacial Surgery, Department of Dentistry in Ajou University Hospital and received either AutoBT, DFDBA or DBBM with sinus elevation using the lateral window technique. Sinus graft height was measured before, immediately after, and six months after bone graft with panoramic radiography and the height changes of the sinus floor was compared according to the graft materials. Results: After six months, the decrease ratio of graft heights were 13.57% for AutoBT group, 14.30% for DFDBA group, and 11.92% for DBBM group. There was no statistically significant difference. Conclusion: The new maxillary sinus floor formed by the upper border of bone graft material, can repneumatize after the maxillary sinus elevation. Thus, long-term stability of sinus graft height represents an important factor for implant success. We found that the three graft materials for sinus elevation do not differ significantly and all three graft materials showed excellent resistance to maxillary sinus repneumatization. However, due to the special circumstances of the maxillary sinus and small sample, the actual difference between the three graft materials may not have been detectable. Therefore further study needs to be conducted for more reliable study results.

• Journal of Korean Dental Science
• /
• 제12권1호
• /
• pp.5-12
• /
• 2019

Purpose: To determine the benefits of autogenous tooth bone (ATB) graft in combination with platelet-rich plasma (PRP) in the rates of success and survival of dental implants placed simultaneously with maxillary sinus floor augmentation (MSFA). Materials and Methods: Patients who visited the Department of Oral and Maxillofacial Surgery at Ulsan University Hospital from 2012 to 2014 and underwent simultaneous placement of implants with MSFA using ATB plus PRP were included in the study. Success and survival rates of the implants were evaluated based on the parameters of age and sex of the patient, site, follow-up period, residual bone height before surgery, diameter, and length of implant, sinus mucosa impairment, and postoperative complications. Result: A total of 23 patients and 67 implants were included in this study. The average age of the patients was $53.78{\pm}10.00$ years. The average follow-up period after installation of the prosthesis was $53{\pm}5$ months. The success and survival rates of the implants after placement of prosthesis were 95.52% and 97.01%, respectively. Conclusion: Combination of ATB and PRP showed high overall success rate, and it can be concluded that this combination is a predictable bone graft procedure for MSFA.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권5호
• /
• pp.278-283
• /
• 2016

Objectives: The maxillary sinus mucosa is reported to recover to preoperative sterility after sinus floor elevation. However, when drainage of maxillary sinus is impaired, recovery can be delayed and maxillary sinusitis can occur. Therefore, in this study, we investigated the correlations between anatomic variants that can interrupt the ostium of the maxillary sinus and incidence of complication after sinus lifting. Materials and Methods: The subjects are 81 patients who underwent sinus lifting in Wonkwang University Dental Hospital (Iksan, Korea). Computed tomography (CT) images of the subjects were reviewed for presence of nasal septum deviation, anatomic variants of the middle turbinate, and Haller cells. Correlations between anatomic variations and occurrence of maxillary sinusitis were statistically analyzed. Results: Patients with anatomic variants of ostio-meatal units, such as deviated nasal septum, concha bullosa or paradoxical curvature of the middle turbinate, or Haller cells, showed a higher rate of complication. However, only presence of Haller cell showed statistically significant. Conclusion: Before sinus lifting, CT images are recommended to detect anatomic variants of the ostio-meatal complex. If disadvantageous anatomic variants are detected, the use of nasal decongestants should be considered to reduce the risk of postoperative sinusitis.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권2호
• /
• pp.71-77
• /
• 2012

Objectives: This study sought to investigate the positioning of the posterior superior alveolar artery in relation to the performance of the maxillary sinus bone graft procedure in a Korean population. Materials and Methods: We identified the position of the posterior superior alveolar artery relative to 93 maxillary sinuses in 58 patients and determined the distance from the inferior border of the artery in the premolar and molar areas to the alveolar ridge and sinus floor. Results: The mean distance from the alveolar ridge to the posterior superior alveolar artery in the dentate group ($20.62{\pm}3.05mm$ in the premolar region, $17.50{\pm}2.84mm$ in the molar region) was greater than as compared to the edentulous group ($18.83{\pm}2.79mm$ in the premolar region, $15.50{\pm}1.64mm$ in the molar region), and this difference was statistically significant (P<0.05). In contrast, there was no statistically significant difference (P>0.05) between the mean distance from the sinus floor to the posterior superior alveolar artery in the dentate group ($8.21{\pm}2.79mm$ in the premolar region, $7.52{\pm}2.07mm$ in the molar region) or in the edentulous group ($7.75{\pm}3.31mm$ in the premolar region, $7.97{\pm}2.31mm$ in the molar region). Conclusion: Prior to surgery, it is important to evaluate the position of the posterior superior maxillary artery by using computed tomography scans. The premolar area is safer than the molar area for performing the maxillary sinus bone graft without bleeding.

• Journal of Periodontal and Implant Science
• /
• 제41권2호
• /
• pp.98-104
• /
• 2011

Purpose: The aim of this study was to evaluate 3.5 years-cumulative survival rate of implants placed on augmentedsinus using Osteon, a bone graft material, and to assess the height of the grafted material through radiographic evaluation. Methods: Twenty patients were treated with maxillary sinus augmentation and 45 implant fixtures were installed simultaneously or after 6 months healing period. The height of the augmented sinus and the loss of marginal bone were measured by panoramic and intraoral radiographs immediately after augmentation and up to 42 months (mean, 19.4 months) subsequently. Changes in the height of the sinus graft material were calculated radiographically. Results: The cumulative survival rate was 95.56% in all 45 implants. Additionall, normal healing process without any complication was observed in all patients. The original sinus height was mean 4.3 mm and the augmented sinus height was mean 13.4 mm after the surgery. The mean marginal bone loss till 42 months was $0.52{\pm}0.56\;mm$. The reduced height of Osteon was $0.83{\pm}0.38\;mm$ and it did not show significant correlation with the follow up periods (P=0.102). There were no statistically significant differences in reduced height of Osteon according to the simultaneous/delayed implantation (P=0.299) and particle size of Osteon (P=0.644). Conclusions: It can be suggested that Osteon may have predictable result when it was used as a grafting material for sinus floor augmentation.

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2007년도 제47회 종합학술대회 연제초록
• /
• pp.190-190
• /
• 2007

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권4호
• /
• pp.337-343
• /
• 2010

Purpose: By reviewing literature on the subject, we compared the survival rate of implants placed in various graft materials used for maxillary sinus augmentation. Materials and Methods: The search protocol used the Pubmed electronic database, with a time limit from 1998 to 2009. Keywords such as 'sinus lift,' 'sinus augmentation,' 'sinus floor elevation,' 'sinus graft,' 'bone graft,' 'implants,' 'oral implants,' and 'dental implants' were used, alone and in combination, to search the database. We selected articles and divided them into three groups by type of graft materials: Group 1. Autogenous bone group: autogenous bone alone; Group 2. Combined bone group: autogenous bone in combination with bone substitutes; and Group 3. Substitute group: bone substitutes alone or bone substitute combinations. Results: We selected 37 articles concerning a total of 2,257 patients and 7,282 implants; 417 implants failed. The total implant survival rate (ISR, %) was 94.3%. In Group 1, 761 patients and 2,644 implants were studied; 179 implants failed and the ISR was 93.2%. In Group 2, 583 patients and 1,931 implants were studied; 126 implants failed and the ISR was 93.5%. In Group 3, 823 patients and 2,707 implants were studied; 112 implants failed and the ISR was 95.9%. Conclusion: Implants inserted in grafts composed of bone substitutes alone or in grafts composed of autogenous bone in combination with bone substitutes may achieve survival rates better than those for implants using autogenous bone alone (P<0.05).