• Archives of Plastic Surgery
• /
• 제48권1호
• /
• pp.61-68
• /
• 2021

Background This study evaluated changes in nasal airway function following Le Fort I osteotomy with maxillary impaction according to the Nasal Obstruction Symptom Evaluation (NOSE) scale. Methods This cohort study included 13 patients who underwent Le Fort I osteotomy with maxillary impaction. Nasal airway function was evaluated based on the NOSE scale preoperatively and at 3 months postoperatively. The change in the NOSE score was calculated as the preoperative score minus the postoperative score. If the normality assumptions for changes in the NOSE score were not met, a nonparametric test (the Wilcoxon signed-rank test) was used. Differences in NOSE score changes according to patient characteristics and surgical factors were evaluated using the Kruskal-Wallis test and the Mann-Whitney test. Results Patients ranged in age from 18 to 29 years (mean ±standard deviation [SD], 23.00±3.87 years). Three were men and 10 were women. Eleven patients (84%) had an acquired dentofacial deformity with skeletal class III malocclusion. The preoperative NOSE scores ranged from 40 to 90 (mean±SD, 68.92±16.68), and the postoperative NOSE scores ranged from 25 to 80 (53.84±18.83). The cohort as a whole showed significant improvement in nasal airway function following maxillary impaction (P=0.028). Eleven patients (84%) had either improved (n=8) or unchanged (n=3) postoperative NOSE scores. However, nasal airway function deteriorated in two patients. Patient characteristics and surgical factors were not correlated with preoperative or postoperative NOSE scores. Conclusions Nasal airway function as evaluated using the NOSE scale improved after maxillary impaction.

• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.71-75
• /
• 2015

To overcome limitations of conventional diagnosis and planning for orthognathic surgery, surgeons have begun to use 3-dimensional (3D) virtual simulation to plan complex orthognathic surgery. In many literatures, it has shown that better surgical outcome achieved with 3D virtual simulation than that with conventional methods. But, there is still lack of data about accuracy of maxillary segmental surgery with 3D virtual simulation. The purpose of this paper was to report the case of maxillary segmental orthognathic surgery with 3D virtual simulation and to assess the actual surgical outcome. Though the result was clinically acceptable, discrepancy between 3D simulation and actual surgery was not superior compared with conventional method. The accuracy of 3D simulation surgery and intermediate wafer fabrication for maxillary segmental surgery needs to be improved. Advancement in 3D software program and careful surgical technique will make it more precise and reliable method.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권5호
• /
• pp.367-371
• /
• 2009

Purpose: The purpose of this study was to evaluate the feasibility of the outfracture osteotomy sinus graft technique with the evaluation of 5-year survival rate of the implants placed in the atrophic edentulous posterior maxillary area. Materials and methods: One hundred and thirteen cases of 96 patients who visited our center from Aug 2004 to July 2009 and were diagnosed as atrophic edentulous maxillary alveolar ridge, were selected and underwent augmentation sinus surgery with outfracture osteotomy technique. Feasibility of the outfracture osteotomy technique was investigated with clinical and radiographic evaluation to assess the survival rate of the total dental implants in augmentation sinus surgery of this new kind. Total fixture number available in follow-up period was 179, in which the lost 10 patients were excluded out of 96 patients. Results: Five-year cumulative survival rate was 97.2% with 5 failures of total 179 fixtures. The average follow-up period was 29 and a half months, with the minimum and maximum follow-up periods of 4 months 21 days and 59 months 14 days, respectively. Conclusion: Traditional infracture technique is a popular method for an augmentation sinus surgery. The authors modified this classical method by outfracturing and readapting the bony window after sinus graft, with excellent treatment results evidenced by high survival rate of 97.2% (174 out of 179 fixtures), which proves the feasibility of the newly-designed outfracture osteotomy sinus graft technique.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권2호
• /
• pp.94-99
• /
• 2013

Purpose: The purpose of this study was to evaluate the feasibility of the outfracture osteotomy sinus graft technique with the evaluation of 8.5 year survival rate of the implants placed in the atrophic edentulous posterior maxillary area. Methods: One hundred and seventy-six cases of 145 patients who visited our center from August 2004 to February 2013 and were diagnosed as atrophic edentulous maxillary alveolar ridge, were selected and underwent sinus graft with outfracture osteotomy sinus graft technique. Feasibility of the outfracture osteotomy sinus graft technique was investigated with clinical and radiographic evaluation to assess the survival rate of the total dental implants in augmentation sinus surgery. Total fixture number available in follow-up period was 320, in which the lost 15 patients were excluded out of 160 patients. Results: Eight point five year cumulative survival rate was 95.6% with 14 failures of total 320 fixtures. The average follow-up period was 28 months 16 days with the minimum and maximum follow-up periods of 4 months 5 days and 94 months 10 days, respectively. Conclusion: Traditional infracture technique is a popular method for an augmentation sinus surgery. The authors modified this classical method by outfracturing and readapting the bony window after sinus graft, with excellent treatment results evidenced by high survival rate, which proves the feasibility of the newly-designed outfracture osteotomy sinus graft technique.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권2호
• /
• pp.124-129
• /
• 2013

Multiple segment osteotomy orthognathic surgery serves to combine the total or segmental maxillary and mandibular correction of the dentofacial deformities with concurrent procedures to provide immediate repositioning to the dento-osseous elements. In addition, splitting the palate may often be necessary to correct a functionally poor relationship of the maxilla to the mandible or the facial skeleton by realigning the maxillary arch. In this case, the discrepancy in a bimaxillary horizontal relationship and the space between the 2nd premolar and 2nd molar was retained after lengthy preoperative orthodontic treatment. However, we could correct these dento-osseous discrepancies immediately by performing midpalatal expansion, anterior segmental osteotomy and symphyseal osteotomy with bimaxillary osteotomies. If the blood supply to each segment segments was maintained and primary closure of the operation site was feasible, multiple segment osteotomy was considered as a very effective technique for treating dentofacial deformities in vertical, transverse, and sagittal dimensions with differential repositioning of all segments.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권3호
• /
• pp.310-318
• /
• 2000

The purpose of this study was to assess the soft tissue changes of upper lip & nose using 38 patients who treated with Le Fort I osteotomy for the correction of dentofacial deformities. Patients were devided into three groups. One was advancement group of maxilla(Group I, N=14), another was impaction group of maxilla(Group II, N=12) and the other was combination group(advancement & impaction)(Group III, N=12). Preop. and 1 month postop. (T1), preop. and 6 months postop.(T2) were analyzed and compared. The results obtained were as follows : 1. The upper lip thickness(UL-VP) moved anteriorly approximately 62% of the horizontal maxillary change and this was significant in the advancement group(Group I) 2. The upper lip length(Stm-Sn) and the lower border of upper lip(Stm) moved superiorly 25%, 40% of the maxillary impaction group(Group II) (P<0.05) 3. There was significancy in the upper lip thicness(UL-VP) approximately 56% of the combination group(Group III) (P<0.05) 4. The nasolabial angle decreased in all groups, but there were no significancy.

• 대한치과의사협회지
• /
• 제51권6호
• /
• pp.322-329
• /
• 2013

Among the occlusal discrepancies, maxillary transverse deficiency is quite common in several reasons. The reasons are comprised of maxillary hypoplasia, thumb sucking habits, non-syndromic palatal synostosis and syndromal patients including cleft patients. Orthodontic treatment is used routinely to correct a deficiency in young patients while it has limitations for a skeletally mature patient. Surgical treatments help provide effective maxillary expansion to correct a deficiency in adults. Surgical methods can be categorized to segmental Le Fort I osteotomy and surgically assisted rapid maxillary expansion(SARME). Both methods seem successful but each method would have its own indication. We give a review on transverse maxillary deficiency and two surgical methods.

• 대한구순구개열학회지
• /
• 제6권1호
• /
• pp.27-34
• /
• 2003

본 교실에서는 상악골의 열성장을 보이는 구순구개열환자에서 RED 장치를 이용한 골신장술을 통하여 상악골의 점진적인 전방이동을 실시하고 약 3년정도의 추시기간을 포함하는 현재까지 특별한 기능 장애없이 양호한상, 하악관계 및 안모를 보이는 증례를 문헌고찰과 함께 보고하는 바이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권4호
• /
• pp.319-324
• /
• 2009

Kole's Anterior segmental osteotomy of the mandible is commonly used to close an anterior open bite, to depress an elevated anterior dentoalveolar segment, or to retrude or advance a dentoalveolar segment. The procedure is often combined with an anterior maxillary segmental osteotomy to correct bimaxillary protrusion. We report 53-year-old woman who the extruded state of mandibular anterior alveolar segment was corrected using an mandibular anterior alveolar segmental osteotomy and dental implantation of the anterior maxilla. We planned to remove the old prosthesis, and then perform an anterior mandibular segmental osteotomy and implant restoration of the anterior maxilla. We suggest that anterior segmental osteotomy is very useful for rehabilitating edentulous patients with malaligned alveolar segment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권6호
• /
• pp.332-336
• /
• 2012

Objectives: This study sought to evaluate fixation methods and determine the best method for the postoperative stabilization of maxillary osteotomy. For our analysis we performed a three-dimensional finite element analysis of stress distribution on the plate, screw, and surrounding bone, as well as displacement onto the plate. Materials and Methods: We generated a model using synthetic skull scan data; an initital surface model was changed to a solid model using software. Modified anterior segmental osteotomy (using Park's method) was made using the program, and four different types of fixation methods were used. An anterior load of 100 N was applied on the palatal surface of two central incisors. Results: The Type 1 (L-shaped) fixation method gave stresses of 187.8 MPa at the plate, 45.8 MPa at the screw, and 15.4 MPa at the bone around the plate. The Type 2 (I-shaped) fixation method gave stresses of 186.6 MPa at the plate, 75.7 MPa at the screw, and 13.8 MPa at the bone around the plate. The Type 3 (inverted L-shaped) fixation method gave stresses of 28.6 MPa at the plate, 29.9 MPa at the screw, and 15.3 MPa at the bone around the plate. The Type 4 (I-shaped) fixation method gave stresses of 34.8 MPa at the plate, 36.9 MPa at the screw, and 14.9 MPa at the bone around the plate. The deflection of the plates for the four fixation methods was 0.014 mm, 0.022 mm, 0.017 mm, and 0.018 mm, respectively. Conclusion: The Type 3 (inverted L-shaped) fixation method offers more stability than the other fixation methods. We therefore recommend this method for the postoperative stabilization of maxillary osteotomy.