• Journal of Korean Dental Science
• /
• v.3 no.2
• /
• pp.12-19
• /
• 2010

Despite the latest advancement made in its techniques and devices/apparatuses and the resulting rising expectation in the field of dental surgery, apicoectomy performed in the molar teeth remains a technical challenge and lacks evidence substantiated by long-term follow-up studies. This study sought to investigate the treatment outcomes and post-operative success rate in the root-end resected molar teeth accompanied by a high level of surgical risks due to their close proximity to the mandibular canal and maxillary sinus. A total of 68 patients who received treatment at Livingwell Dental Hospital between 2004 and 2010 and underwent apical surgery in the maxillary or mandibular molar area were enrolled in this study. A total of 160 roots collected from 75 molar teeth were subjected to surgical endodontic treatment and subsequently evaluated clinically as well as radiographically. Based on the results of the study, the clinical success rate was found to be 78.8% in cases involving radiological healing. Likewise, 90.7% of the roots recorded a robust clinical survival rate, but with incomplete healing as shown by radiography. The results indicate that the apical procedure involving molar teeth is a prognosis-friendly method that promises positive outcomes and higher success rate based on long-term follow-up observations.

• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.290-300
• /
• 2016

Objective: This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Methods: Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. Results: An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. Conclusions: The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.2
• /
• pp.185-193
• /
• 1992

The purpose of this study was to evaluate the prevalence and distribution of tooth number anomaly by means of the analysis of panoramic radiographs in 6,531 patients visited the Dental Infirmary of Kyungpook National University Hospital from January 1983 to May 1992. The results were as follows: 1. The prevalence of congenitally missing teeth except third molar was revealed to be 10.8%, and there was a hihger prevalence in females(44.6%) than in males(55.4%). Mandibular 2nd premolars(23.2 %) were absent most frequently, followed by maxillary lateral incisors(18.4 %), mandibular lateral incisors(18.3%), and maxillary second premolars(15.4 %) in descending order of frequency. As to the number of congenitally missing teeth, the percentage of missing one tooth was 48%, missing two teeth was 35.4 %, missing three teeth was 6.6%. 2. he prevalence of congenitally missing third molars was revealed to be 39.7%. There was a higher prevalence n the maxilla(60.3%) than in the mandible(39.7%). Maxillary right 3rd molars(30.6%) were absent most frequently, followed by maxillary left 3rd molar(29.7%), mandibular right 3rd molar(202%), mandibular left 3rd molar(19.5%) in descending order of frequency. 3. The prevalence of supernumerary teeth was revealed to be 4.2%, and there was a higher prevalence in males(65.7%) than in females(34.3 ). They were ound most frequently in maxillary central incisor area(64.8%), followed by maxillary lateral incisor area(132%), posterior area of maxillary third molar(8.7%) in descending order of frequency. As to the number of supernumerary teeth; The percentage of one supernumerary tooth was 79.9%, two supernumerary teeth was 8.9%, three supernumerary teeth was 1.2 %.

• Journal of Korean Dental Science
• /
• v.10 no.2
• /
• pp.53-59
• /
• 2017

Purpose: The objective of the present article is to determine whether there are differences in vertical enlargement ratio among various sites within both jaws in a panoramic radiograph. Materials and Methods: Two hundred and seventy-threeimplant sites in panoramic radiographs were evaluated by two observers. Magnification ratios at various sites in both jaws were calculated and compared with each other. Result: The average vertical enlargement ratio in the panoramic radiograph was 1.264 and this value was larger than original ratio 1.250. Although vertical magnification ratio of maxillary molar area was higher than that of mandibular molar area, every group showed similar magnification ratio in clinical respect. Conclusion: Vertical magnification ratio of the maxillary molar area is statistically higher than that of the mandibular molar area in the panoramic radiograph, but it is clinically negligible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.4
• /
• pp.320-328
• /
• 2006

Purpose: The aim of this study was to evaluate the effects of pterygomaxillary separation on dimensional changes of dental arch following surgically-assisted rapid maxillary expansion (SARME). Patients and Methods: Eighteen adults who had been treated by SARME for transverse maxillary deficiency from May 2000 to August 2005 were evaluated. Thirteen patients (Group 1) were treated with subtotal Le Fort I osteotomy including pterygomaxillary separation and anterior midpalatal osteotomy. The same operation was performed in five patients (Group 2) except pterygomaxillary separation. Dental study casts were taken before operation and after removal of expansion device. And then, skeletal and dental parameters were measured pre- and post-operatively. Results: 1. Changes of mean interdental width 1) In group 1, mean maxillary interdental width was increased 70%($47{\sim}99%$), 95%($84{\sim}115%$), and 77%($57{\sim}94%$) of total expansion on canine, first premolar, and first molar region, respectively after retention. 2) In group 2, mean maxillary interdental width was increased 77%($59{\sim}100%$), 78%($45{\sim}107%$), and 86%($57{\sim}116%$) of total expansion on canine, first premolar, and first molar region, respectively after retention. 3) There was a statistical difference between the change of interdental width of group 1 and group 2 at first premolar(p<0.05). 2. Changes of mean interalveolar width 1) In group 1, mean maxillary alveolar bone width was increased 66%($42{\sim}84%$), 74%($42{\sim}104%$), and 57%($31{\sim}78%$) of total expansion on canine, first premolar, and first molar region, respectively after retention. 2) In Group 2, mean maxillary alveolar bone width was increased 73%($55{\sim}98%$), 67%($36{\sim}89%$), and 59%($48{\sim}73%$) of total expansion on canine, first premolar, and first molar region, respectively after retention. 3) There were no statistical differences between group 1 and group 2 at each teeth area. Conclusion: These results suggest that SARME without pterygomaxillary separation may allow the relatively equal expansion at both anterior and posterior teeth area and most amounts of maxillary interdental expansions were acquired with the expansion of the maxilla by SARME.

• The Journal of the Korean dental association
• /
• v.54 no.2
• /
• pp.142-148
• /
• 2016

본 연구의 목적은 특이한 C형 치근과 근관을 가지고 있는 상악 제 1대구치의 근관치료 증례를 콘빔단층촬영을 사용하여 진단 및 치료하였음을 보고하는 것이다. 본 증례에서는 특이적인 해부학적 근관 형태가 콘빔단층촬영을 사용하여 확인되었으며 비외과적 근관치료가 시행되었다. 촬영한 영상에서 모든 치근이 C 형태로 융합되어 있으며 독립적인 4개의 근관을 포함하고 있음이 관찰되었다. C형 근관계의 복잡성을 고려할 때 콘빔단층촬영이 적절한 근관계의 확인과 의원성 손상을 예방하기 위해 유용한 보조적 방법인 것으로 보여진다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.61-67
• /
• 2000

It was the aim of present study to grope the relationship of the maxillary first molar width to the various transverse skeletal measurements in frontal headfilm, and to formulate the predictive equations of the maxillary intermolar width (U6-U6) from each of the variables. Frontal cephalograms of 17 males from 18 to 26 YO and 13 females from 17 to 25 YO who manifested balanced skeletal profiles, normal occlusion, and no history of orthodontic and prosthodontic treatment were employed as subjects. Nine transverse measurements were scrutinized with Pearson's correlation analysis, simple and stepwise multiple regression analysis in specific regards to the intermolar width of maxillary first molar. Statistical output demonstrated that there were intimate relationships within the various transverse skeletal measurements each other, and among the others, high correlation was found between facial width and maxillary first intermolar width. Regression analyses provided the reliable and clinically applicable predictive equations to set the ideal maxillary first intermolar width(U6-U6) from the given skeletal framework.

• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.98-107
• /
• 2020

Objective: The aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions. Methods: Transverse skeletal parameters and posterior tooth inclinations were evaluated using cone beam computed tomography images, and occlusal force as well as contact area were assessed using pressure-sensitive films in 124 normodivergent adults. A linear mixed model was used to cluster posterior teeth into maxillary premolar, maxillary molar, mandibular premolar, and mandibular molar groups. Differences among Class I, II, and III groups were compared using an analysis of variance test and least significant difference post-hoc test. Correlations of posterior dental inclinations to occlusal function were analyzed using Pearson's correlation analysis. Results: In male subjects, maxillary premolars and molars had the smallest inclinations in the Class II group while maxillary molars had the greatest inclinations in the Class III group. In female subjects, maxillary molars had the smallest inclinations in the Class II group, while maxillary premolars and molars had the greatest inclinations in the Class III group. Occlusal force and contact area were not significantly different among Class I, II, and III groups. Conclusions: Premolar and molar inclinations showed compensatory inclinations to overcome anteroposterior skeletal discrepancy in the Class II and III groups; however, their occlusal force and contact area were similar to those of Class I group. In subjects with normodivergent facial patterns, although posterior tooth inclinations may vary, difference in occlusal function may be clinically insignificant in adults with Class I, II, and III malocclusions.

• Restorative Dentistry and Endodontics
• /
• v.41 no.1
• /
• pp.55-62
• /
• 2016

Objectives: The purpose of this study was to investigate the incidence of root fusion and C-shaped root canals in maxillary molars, and to classify the types of C-shaped canal by analyzing cone-beam computed tomography (CBCT) in a Korean population. Materials and Methods: Digitized CBCT images from 911 subjects were obtained in Chosun University Dental Hospital between February 2010 and July 2012 for orthodontic treatment. Among them, a total of selected 3,553 data of maxillary molars were analyzed retrospectively. Tomography sections in the axial, coronal, and sagittal planes were displayed by PiViewstar and Rapidia MPR software (Infinitt Co.). The incidence and types of root fusion and C-shaped root canals were evaluated and the incidence between the first and the second molar was compared using Chi-square test. Results: Root fusion was present in 3.2% of the first molars and 19.5% of the second molars, and fusion of mesiobuccal and palatal root was dominant. C-shaped root canals were present in 0.8% of the first molars and 2.7% of the second molars. The frequency of root fusion and C-shaped canal was significantly higher in the second molar than the first molar (p < 0.001). Conclusions: In a Korean population, maxillary molars showed total 11.3% of root fusion and 1.8% of C-shaped root canals. Furthermore, root fusion and C-shaped root canals were seen more frequently in the maxillary second molars.

• The Journal of the Korean dental association
• /
• v.55 no.6
• /
• pp.400-410
• /
• 2017

Approximately 30% of adult patients who want orthodontic treatment have transverse discrepancy with insufficient width of the maxilla. Particularly, in Class III patients requiring orthognathic surgery, the frequency of insufficient width of the maxillary arch related to respiratory problems is high. We report a case of non-surgical maxillary expansion using a Hyrax type expander with an orthognathic surgery, based on the reports that the ratio of non-fused midpalatal suture is not high in adults. A 30 years and 2 months old woman with a long face showed an Angle Class III with a vertical growth pattern. Class III molar and canine relation, anterior edge bite, and mandibular incisor compensatory lingual inclination were observed. The posterior buccal overjet seemed to be appropriate, but I diagnosed that there was a transverse discrepancy, for the following reasons. The inter-canine and inter-molar widths were sufficient but excessive lingual inclination of the mandibular molars was observed when assessing the bucco-lingual inclination based on the center of resistance of the maxillary and mandibular first molar. For this reason, it was expected that intercuspal interference would occur during orthodontic decompensation. Therefore, slow maxillary expansion using Hyrax type expander was performed and 2-jaw rotation surgery was performed to improve aesthetic and occlusion. Adults can also improve width discrepancy by non-surgical methods, which can avoid SARPE requiring additional surgery or segmental surgery lacking stability and predictability.