• The korean journal of orthodontics
• /
• v.54 no.3
• /
• pp.171-184
• /
• 2024

Objective: This study aimed to determine the maxillary and mandibular basal bone regions and explore the three-dimensional positional relationship between the dentition and basal bone regions in patients with skeletal Class I and Class II malocclusions with mandibular retrusion. Methods: Eighty patients (40 each with Class I and Class II malocclusion) were enrolled. Maxillary and mandibular basal bone regions were determined using cone-beam computed tomography images. To measure the relationship between the dentition and basal bone region, the root position and root inclination were calculated using the coordinates of specific fixed points by a computer program written in Python. Results: In the Class II group, the mandibular anterior teeth inclined more labially (P < 0.05), with their apices positioned closer to the external boundary. The apex of the maxillary anterior root was positioned closer to the external boundary in both groups. Considering the molar region, the maxillary first molars tended to be more lingually inclined in females (P = 0.037), whereas the mandibular first molars were significantly more labially inclined in the Class II group (P < 0.05). Conclusions: Mandibular anterior teeth in Class II malocclusion exhibit a compensatory labial inclination trend with the crown and apex relative to the basal bone region when mandibular retrusion occurs. Moreover, as the root apices of the maxillary anterior teeth are much closer to the labial side in Class I and Class II malocclusion, the range of movement at the root apex should be limited to avoid extensive labial movement.

• The korean journal of orthodontics
• /
• v.42 no.3
• /
• pp.138-143
• /
• 2012

Objective: To evaluate the short-term effect of fangchinoline, an anti-inflammatory drug widely used in Asia, on root resorption that is associated with orthodontic tooth movement. Methods: Twenty-four Wistar rats were randomly divided into 6 groups. Mesial forces of 0, 50, or 100 g were applied to the maxillary first molar of the rats in each group for 14 days by activating nickel-titanium closed-coil springs. One-half of the rats receiving each of these treatments also received injections of 200 ${\mu}L$ fangchinoline every 2 days. Finally, movement of the maxillary first molars was measured using digitized radiographs. The molars were extracted and the surfaces of the root resorption craters were recorded using a scanning electron microscope. The distance the molars moved and resorption-area ratio was measured, and results were analyzed using 2-way ANOVA tests. Results: There were no statistical differences in the distances the first molars moved under 50 or 100 g force, regardless of treatment with fangchinoline. However, the resorption area ratios were significantly smaller in those rats that were treated with both tension and fangchinoline than in those rats treated by tension alone. Conclusions: Fangchinoline reduced the resorption area ratio in rats and is therefore an important means of alleviating root resorption.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.643-652
• /
• 2006

The purpose of this study was to elucidate the size and morphologic characteristics of maxillary primary first molars in Korean children using three-dimensional laser scanner and compare three-dimensional image with preformed stainless steel crown. Scanned three-dimensional images of dental cast taken from 132 children(male 62, female 70) by three-dimensional laser scanner(Breuckmann opto-Top HE100, INUS, Korea) were used. Mesiodistal diameter, buccolingual diameter, occlusogingival height and crown shape of each image were calculated by Rapidform 2004 program(INUS, Korea). The values were statistically compared by independent samples t-test with 95% of significant level. The results were as follows : 1. No significant difference in crown size was found between left and right maxillay primary first molar(p>0.05). 2, Significant difference in mesiodistal diameter, buccolingual diameter, buccal occlusogingival height was found between male and female (p<0.05), and crown size of male was bigger than that of female. 3. Average image of maxillay primary first molar was shaped three-dimensionally and measured. In comparison with 3M stainless steel crown, this image was similar with No.4 or No.5 SS crown in male, No.4 in female. In comparison with ILSUNG SS crown, this image was similar with No.5 in male, No.4 in female. 4 Mesiolingual line angle area, distolingual line angle area and buccogingival ridge were more obvious in average image than 3M stainless steel crown. ILSUNG SS crown was more square and had longer mesiodistal diameter than average 3D image.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.2
• /
• pp.533-547
• /
• 1999

Malignant fibrous histiocytoma is one of the most common soft tissue sarcomas in late adult life. but its incidence in oral and maxillofacial region is extremely rare. We report a case of malignant fibrous histiocytoma which occurred in the infratemporal fossa. Conventional radiograph of this case showed an ill-defined radiolucent lesion in the alveolar bone of the right maxillary first molar area. the lateral wall of the maxillary sinus. and the ascending ramus of mandible. MRI demonstrated a well defined mass of intermediate signal intensitiy in Tl weighted images but T2 weighted images showed two distinctive regions of different characteristics. Upper portion of the lesion was of hyperintense signal but (at) lower portion, the signal intensity decreased clearly, which might mean that this lesion(mass) is composed of two different subtypes though it couldn't be confirmed by histopathological examination. Biopsy was taken the lesion as only in the soft tissue of the maxillary posterior alveolar region and confirmed the storiform-pleomorphic type of malignant fibrous histiocytoma. Histopathological subtype was well consistent with the relatively aggressive imaging findings of that region. We expect more detailed analysis of the nature of malignant fibrous histiocytoma with improvement of the imaging modality and the identification of the relationship between diagnostic imaging and histopathologic findings.

• The Journal of the Korean dental association
• /
• v.52 no.10
• /
• pp.623-632
• /
• 2014

The facial asymmetries include maxillary, mandibular, and chin asymmetries, although the most common deformity is primarily in the mandible. Common causes of this type of asymmetry can include asymmetric growth of the condyle or the mandible. In these patients, the location of the Me would be deviated to the shorter side because of the asymmetric growth of the mandible, and, commonly, the maxillary occlusal plane would be tilted toward the deviated side because the maxilla likely grows asymmetrically according to the pattern of asymmetric mandibular growth. Three-dimensional CT images are ideal for evaluating the size and location of anatomic structures, and such reconstructed images allow the use of software that can show anatomic structures from numerous angles, allowing actual measurements of distances and angles without problems of magnification, distortion, or superimposition caused by 2-dimensional imaging. In the present study using 3D-CT imaging, the 8 parameters, including measurements of the upper midline deviation, maxillary canting in the canine and first molar regions, width of the upper arch, width of the mandible at the Go, vertical length of the ramus, inclination of the ramus, and deviation of the Me were easily measured. The dentition should be orthodontically decompensated and dental midline should ensure incisor midlines positioned in the midline of each jaw before surgical correction. Surgical correction could be considered such as canting or yawing correction in the frontal or horizontal aspect, respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.73-78
• /
• 2012

Complex odontomas consist of a conglomerate mass of enamel, dentin and cementum which bears no anatomic resemblance to a tooth. The majority of these lesions are completely asymptomatic, being discovered on routine radiographic examination or when films are taken to determine the reason for tooth eruption failure. Compound odontomas seldom cause bony expansion, but complex odontomas often cause slight or even marked bony expansion. Complex odontomas are mostly associated with permanent teeth and very rarely associated with deciduous teeth. They are usually located in the first-or second-molar areas of the mandible. This report presents a case of a patient with impaction of a maxillary primary canine by a complex odontoma in which surgical excision of the lesion was performed. And the primary canine was repositioned right under gingival level for spontaneous erution. Follow-up after six months showed spontaneous eruption ofthe repositioned maxillary primarycanine.

• The korean journal of orthodontics
• /
• v.12 no.1
• /
• pp.21-26
• /
• 1982

This study was undertaken to document relations between facial skeletal pattern and dental occlusion. The data in .this study were collected from pretreatment cephalometric radiographs and study models of patients' records present in the files of Orthodontic Department, Seoul National University Hospital. Patients were selected on the basis of a mandibular plane-sella nasion angle equal to or greater than $38^{\circ}$ (high SN-MP angle) or equal to or less than $26^{\circ}$ (low SN-MP angle). Patients in the mixed dentition and with missing permanent teeth were excluded for ease of assessing tooth size / arch circumference relationships and then 30 high SN-MP and 11 low SN-MP patients were selected among them. The mean age of these two groups of patients was high SN-MP, $12.8{\pm}1.23$ years and low SN-MP, $13.0{\pm}1.48$ years. The following conclusions were obtained. 1. In the maxilla and mandible the mean tooth size of high SN-MP patients was nearlly identical to the low SN-MP patients. 2. The mean maxillary arch circumference was increased in low SN-MP group compared with high SN-MP group and a smilar, but smaller, mean increase was present in mandible. 3. The difference between the mean maxillary circumference required and the mean maillary circumference present ranged from -4.8mm in the high SN-MP group to -1.3mm in the low SN-MP group. A small range of means occurred in the mandible (high SN-MP: -4.0mm to low SN-MP: -1.8mm). 4. In the maxilla and mandible the mean arch length was nearly identical in the high and low SN-MP groups. 5. The mean incisor inclination was increased as the SN-MP angle decreased in the maxilla and mandible. 6. The men distance of the maxillary first molar from anterior border of the pterygomaxillary fissure was nearly similar between high and low groups. 7. The mean mandibular intermolar width was increased from high SN-MP to low SN-MP patients.

• Journal of Veterinary Science
• /
• v.21 no.5
• /
• pp.75.1-75.8
• /
• 2020

Background: Dental diseases are common in dogs and cats, and accurate measurements of dentoalveolar structure are important for planning of treatment. The information that the comparison computed tomography (CT) with dental radiography (DTR) is not yet reported in veterinary medicine. Objectives: The purpose of this study was to compare the DTR with CT of dentoalveolar structures in healthy dogs and cats, and to evaluate the CT images of 2 different slice thicknesses (0.5 and 1.0 mm). Methods: We included 6 dogs (2 Maltese and 1 Spitz, Beagle, Pomeranian, mixed, 1 to 8 years, 4 castrated males, and 2 spayed female) and 6 cats (6 domestic short hair, 8 months to 3 years, 4 castrated male, and 2 spayed female) in this study. We measured the pulp cavity to tooth width ratio (P/T ratio) and periodontal space of maxillary and mandibular canine teeth, maxillary fourth premolar, mandibular first molar, maxillary third premolar and mandibular fourth premolar. Results: P/T ratio and periodontal space in the overall dentition of both dogs and cats were smaller in DTR compared to CT. In addition, CT images at 1.0 mm slice thickness was generally measured to be greater than the images at 0.5 mm slice thickness. Conclusions: The results indicate that CT with thin slice thickness provides more accurate information on the dentoalveolar structures. Additional DTR, therefore, may not be required for evaluating dental structure in small-sized dogs and cats.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.362-371
• /
• 2004

It is essential to have adequate knowledge of the timing of root resorption of deciduous teeth for diagnosis and treatment planning in pediatric and orthodontic dentistry. Dental development is also influenced by hereditary characteristics, environmental factors, race, sex, endocrine reaction, nutrition, socioeconomic condition and secular factor. The aims of the present study were to determine the mean age of root resorption of deciduous teeth in contemporary Korean children and to compare the mean age of root resorption time of deciduous teeth between early 1990s and early 2000s. The study population was made up of Korean children attending the pediatric dentistry ward of Kyungpook National University Hospital. One thousand thirty seven children's panoramic radiograph (girls: 528 persons, boys: 509 persons) in $1990{\sim}1992$ and one thousand sixty five children's panoramic radiograph (girls: 394 persons, boys: 671 persons) in $2001{\sim}2003$ were examined. This study utilized a cross-sectional design. Due to the problems of imaging in the maxillary region and the mandibular incisor region, the mandibular deciduous canine, the mandibular deciduous first molar and the mandibular deciduous second molar were chosen for examination. The results were as follows. 1. There is a tendency for the teeth to resort earlier in the early 2000s group than the in early 1990s group. At the Res c stage, the difference of the mean age was 0.4 years. 2. At the Res c stage, the order of difference of the mean age from smaller to larger for the girls was the mandibular deciduous canine, the mandibular first deciduous molar, and the mandibular second deciduous molar. On the other hand, for the boys, the order was the mandibular second deciduous molar, the mandibular first deciduous molar, and the mandibular deciduous canine. The difference was larger with aging in girls and smaller with aging in boys. 3. There is a tendency for the teeth to resort earlier in girls in both the early 1990s group and the early 2000s group. The difference of the mean age between girls and boys was 0.3 year. 4. The commencement of root resorption of the mandibular deciduous canine was slower than that of the mandibular first deciduous molar. However, the completion of root resorption of the mandibular deciduous canine is faster than that of the mandibular first deciduous molar. The total elapsed time of root resorption from commencement to completion was shortest in the mandibular deciduous canine. 5. For each of the teeth in the early 1990s and the early 2000s groups, the speed of root resorption was in the later stage faster than in the earlier stage. In order to know about the exact timing of root resorption of deciduous teeth, periodic and longitudinal studies preferably covering the entire period of growth, is required.

• Journal of Technologic Dentistry
• /
• v.46 no.1
• /
• pp.15-19
• /
• 2024

An ideal post material should have physical properties similar to those of dentin. Post materials with high elastic moduli may cause root fractures. This clinical report describes the treatment of a severely damaged tooth using a recently introduced material. Polyetherketoneketone (PEKK) is a semicrystalline high-performance thermoplastic polymer. PEKK is a promising material for custom post-and-core fabrication because of its elasticity close to that of dentin, good shock absorbance, machinability, and low cost. A laboratory scanner was used to digitize the conventional impression of a severely damaged maxillary right first molar. A custom PEKK post-and-core was designed and milled using computer-aided design and computer-aided manufacturing technology. Using the proposed technique, a custom PEKK post-and-core was fabricated accurately and human error was reduced. Restoration was luted with resin cement. Custom PEKK post-and-core restorations are a viable alternative for treating severely damaged teeth.