• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.1
• /
• pp.48-52
• /
• 2013

Ectopic eruption of the first permanent molar is an abnormal positioning of this tooth, causing a premature resorption of the distal surface of the second primary molar. It occurs in approximately 3~4% of the population and the maxillary arch is usually affected. While 66% of ectopically erupting permanent molars are corrected spontaneously without treatment (i.e. a reversible type), active treatment is necessary for irreversible ectopic eruption cases. The treatment modalities have been divided into two categories: interproximal wedging and distal tipping. Interproximal wedging is indicated for minimal impaction and when the impaction is severe, distal tipping techniques are required. Although much has been written about treatment modalities on unilateral ectopic eruption of the first permanent molar, few reports mention bilateral ectopic eruption cases. In this report, two cases of bilateral ectopic eruption of the first permanent molars in young patients are presented. We describe the use of a modified bilateral Halterman appliance for correction of these cases and the clinical results were satisfactory.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.382-388
• /
• 2002

In the present study, crown diameters and their sexual differences in deciduous teeth were investigated in children of Chon-ju city, Korea. Plaster casts of the deciduous dentitions obtained from 50 boys and 50 girls were examined. Mesiodistal and buccolingual crown diameters were measured using a digital caliper(0.01mm) according to the definitions of Seipel and Moorees et al. These measurements were performed three times, and intra-observer measurement errors were calculated by the single determination method. The crown index, module and area were calculated in order to provide a comparison of crown proportions. The results obtained were summarized as follows; 1. The mean values of intra-observer measurement errors were 0.255mm and are unlikely to have influenced the statistical analysis. 2. The mean values of mesiodistal and buccolingual crown diameters examined were larger in boys than girls. 3. The mean coefficient of variation was 5.6 in the deciduous dentition. There were a trend for the primary second molar to be the least variable in size of all teeth both in boys and girls. 4. Fluctuating asymmetry is the difference between left and right antimeres in individuals. Primary second molars were less asymmetrical than primary first molars in both dimensions. 5. In maxillary teeth, Crown index is larger in boys than in girls. In contrast, in mandibular teeth, except primary canine, it is larger in girls than in boys. Crown module is larger in boys than in girls and increased progressively from primary first incisor to primary second molar. Crown area is consistently larger in boys than in girls. The minimum crown area is mandibular primary incisor and maximum crown area is maxillary primary second molar.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.543-555
• /
• 1995

In the orthopedic therapy, the biomechanical analysis of the appliance is necessary to get a desirable orthopedic effect. The purpose of this study was to investigate the desirable direction and application position of the protraction force. The protraction force of 500g was applied to the first premolar or to the first molar. The direction of force application was paralell or $20^{\circ}$ downward to the occlusal plane respectively. The stress distribution and the displacement within the maxilla was analyzed by a 3-dimensional finite element method. The findings obtained were as follows 1. Protraction forces caused a counterclockwise rotation of the maxilla. 2. The degree of maxillary rotation was less when the force was applied $20^{\circ}$ downward direction to the occlusal plane than when applied to the parallel direction. 3. The degree of rotation of maxilla was greater when the parallel force was applied to the 1st premolar than when applied to the first molar, whereas it was greater when force is applied $20^{\circ}$ downward than at the first premolar. In conclusion, the $20^{\circ}$ downward protraction from the first premolar induced the least counterclockwise rotation of the maxilla and was thought as the desirable direction and application position of the protraction force.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.86-89
• /
• 2010

Purpose: Osteotome sinus floor elevation (OSFE) is an often-used technique of great utility in certain implant patients with resorbed posterior maxilla. Recently benign paroxysmal positional vertigo (BPPV) has been reported as an early postoperative complication following OSFE. Although OSFE-induced BPPV commonly resolves itself within a month without treatment, this complication can be a cause of trouble between the implant surgeon and patient. This report presents a case of BPPV following OSFE. Methods: A 27-year-old man without any significant medical problems and missing his maxillary right first molar, was scheduled for OSFE and simultaneous implant placement. Results: The patient suffered dizziness accompanied by nausea immediately after implant placement using OSFE. Following referral to the ear nose throat clinic, "right posterior canal BPPV" was diagnosed. Despite anti vertigo medication and a single episode of the Epley maneuver, the condition did not improve completely. The Epley maneuver was then applied 7 and 8 days later and the symptoms of BPPV disappeared. One year later, the patient remained symptom-free. Conclusions: Before sinus elevation with an osteotome, implant surgeons should screen out patients with a history of vertigo, to diminish the possibility of BPPV. Operators should be aware of BPPV symptoms. As the symptoms may be very incapacitating, immediate referral to an otorhinolaryngologist is recommended.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.60-64
• /
• 2017

Root canal anatomy is complex, and the recognition of anatomic variations could be a challenge for clinicians. This case report describes the importance of cone beam computed tomographyic (CBCT) imaging during endodontic treatment. A 23 year old woman was referred by her general dental practitioner with the chief complaint of spontaneous pain in her right posterior maxilla. From the clinical and radiographic findings, a diagnosis of symptomatic irreversible pulpitis was made and endodontic treatment was suggested to the patient. The patient underwent CBCT examination, and CBCT scan slices revealed seven canals: three mesiobuccal (MB1, MB2, and MB3), two distobuccal (DB1 and DB2), and two palatal (P1 and P2). Canals were successfully treated with reciprocating files and filled using single-cone filling technique. Precise knowledge of root canal morphology and its variation is important during root canal treatment. CBCT examination is an excellent tool for identifying and managing these complex root canal systems.

• Journal of Technologic Dentistry
• /
• v.43 no.4
• /
• pp.153-159
• /
• 2021

Purpose: The purpose of this study was to assess the fitness of anterior and posterior interim crowns fabricated by three different additive manufacturing technologies. Methods: The working model was digitized, and single crowns (maxillary right central incisor and maxillary right first molar) were designed using computer-aided design software (DentalCad 2.2; exocad). On each abutment, interim crowns (n=60) were fabricated using three types of additive manufacturing technologies. Then, the abutment appearance and internal scan data of the interim crown was obtained using an intraoral scanner. The fitness of the interim crowns were evaluated by using the superimposition of the three-dimensional scan data (Geomagic Control X; 3D Systems). The one-way analysis of variance and Tukey posterior test were used to compare the results among groups (α=0.05). Results: A significant difference was found in the fitness of the interim crowns according to the type of additive manufacturing technology (p<0.05). The posterior interim crown showed smaller root mean square value than the anterior interim crown. Conclusion: Since the fitness of the posterior interim crown produced by three types of additive manufacturing technology were all within clinically acceptable range (<120 ㎛), it can be sufficiently used for the fabrication of interim crowns.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.117-125
• /
• 2016

Purpose: This study evaluated and compared interradicular distances and cortical bone thickness in Thai patients with Class I and Class II skeletal patterns, using cone-beam computed tomography (CBCT). Materials and Methods: Pretreatment CBCT images of 24 Thai orthodontic patients with Class I and Class II skeletal patterns were included in the study. Three measurements were chosen for investigation: the mesiodistal distance between the roots, the width of the buccolingual alveolar process, and buccal cortical bone thickness. All distances were recorded at five different levels from the cementoenamel junction (CEJ). Descriptive statistical analysis and t-tests were performed, with the significance level for all tests set at p<0.05. Results: Patients with a Class II skeletal pattern showed significantly greater maxillary mesiodistal distances (between the first and second premolars) and widths of the buccolingual alveolar process (between the first and second molars) than Class I skeletal pattern patients at 10 mm above the CEJ. The maxillary buccal cortical bone thicknesses between the second premolar and first molar at 8 mm above the CEJ in Class II patients were likewise significantly greater than in Class I patients. Patients with a Class I skeletal pattern showed significantly wider mandibular buccolingual alveolar processes than did Class II patients (between the first and second molars) at 4, 6, and 8 mm below the CEJ. Conclusion: In both the maxilla and mandible, the mesiodistal distances, the width of the buccolingual alveolar process, and buccal cortical bone thickness tended to increase from the CEJ to the apex in both Class I and Class II skeletal patterns.

• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.108-119
• /
• 2020

Objective: The primary objective of this study was to quantitatively analyze the bone parameters (thickness and density) at four different interdental areas from the distal region of the canine to the mesial region of the second molar in the maxilla and the mandible. The secondary aim was to compare and contrast the bone parameters at these specific locations in terms of sex, growth status, and facial type. Methods: This retrospective cone-beam computed tomography (CBCT) study reviewed 290 CBCT images of patients seeking orthodontic treatment. Cortical bone thickness in millimeters (mm) and density in pixel intensity value were measured for the regions (1) between the canine and first premolar, (2) between the first and second premolars, (3) between the second premolar and first molar, and (4) between the first and second molars. At each location, the bone thickness and density were measured at distances of 2, 6, and 10 mm from the alveolar crest. Results: The sex comparison (male vs. female) in cortical bone thickness showed no significant difference (p > 0.001). The bone density in growing subjects was significantly (p < 0.001) lower than that in non-growing subjects for most locations. There was no significant difference (p > 0.001) in bone parameters in relation to facial pattern in the maxilla and mandible for most sites. Conclusions: There was no significant sex-related difference in cortical bone thickness. The buccal cortical bone density was higher in females than in males. Bone parameters were similar for subjects with hyperdivergent, hypodivergent, and normodivergent facial patterns.

• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.289-301
• /
• 2004

It is the purpose of this study to characterize oral symptoms and to comprehend the cause and the relapse possibility of patients with open bite. This case study examines the orthodontic treatment of a group of female patients with open bite and Angle's Class I malocclusion. A cephalograph of the patient was taken and tracing of the radiograph was completed. In addition to Bjork and Ricketts analysis, additional measurements of specific areas were taken. The occlusal plane was determined by drawing a line connecting the mesiobuccal cusp tip of the maxillary first molar and the incisal edge of the maxillary central incisors. Patients were divided into two groups depending on the relationship between the marginal ridge of the maxillayy first premolar and the drawn line. Those patients with marginal ridges above the occlusal plane were placed into Group 1, while Group 2 subjects exhibited marginal ridges lower than the occlusal plane. The common characteristics within each group and the characteristic differences between each group both prior to and after orthodontic treatment were examined, and finally, the functional oral volume of each patient was analyzed. The results of the case study were as follows: 1. An examination of the skeletal relationship and anatomical form for both Group 1 and 2 showed that all subjects exhibited hyperdivergent skeletal forms, but Group 2 subjects generally demonstrated underdevelopment of the mandible and a smaller articular angle, resulting in an anterior positioning tendency of the mandible. 2. An analysis of the maxillary arches of Group 1 subjects prior to and after orthodontic treatment showed that the antero-inferior direction had changed to an antero-superior directional tendency, while the maxillary arches of the Group 2 patients showed a trend from an antero-superior direction to an antero-inferior relationship. The mandibular arches in both groups showed a change to an antero-superior direction. 3. Functional space analysis showed that Group 2 patients exhibited a greater tendency of haying palatal planes that drop in a postero-inferior direction, resulting in a more severe open bite than their Group 1 counterparts. The results of this case study show that although patients belonging to either Group 1 or 2 exhibited few external differences in the appearance of open bite, an examination of the dental and skeletal relationships by analyzing patient cephalographs showed that patients presenting with flat maxillary occlusal planes exhibited more severe open bite relationships than patients with curved occlusal planes.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.359-366
• /
• 2010

It was easy to find that children of a skeletal anterior crossbite in the early mixed dentition period showed a stark difference in the dental maturity between their maxillary and mandibular teeth, if they have stronger physical characteristics. If the difference of dental age between maxillary and mandibular teeth which can be identified via panoramic radiographs may serve as an early sign of class III malocclusion, this is considered valuable as a tool of early detection diagnosis. We obtained lateral cephalometric radiographs, panoramic radiographs, working model and clinical images of patients of Hellman dental age IIA and IIC who visited the department of pediatric dentistry, Pusan National University Dental Hospital and examined them to select 50 patents for normal occlusion group and skeletal anterior crossbite group, respectively. Their panoramic radiographs were used for the Demirjian's method to figure out dental ages of maxillary and mandibular teeth of each group and the eruption rate of the first molars. Their differences are as follows: 1. In both groups, the dental ages from Demirjian's method were advanced than the chronological ages. No sexual dimorphism was detected for the chronological or dental age in either group (p>0.05). 2. The difference of dental age of maxillary and mandibular teeth between the normal occlusion group and crossbite group was 0.22 and 0.69 years, respectively, with a higher difference in crossbite group(p<0.05). 3. Compared to the normal occlusion group, the crossbite group showed a higher difference in the eruption rate between maxillary and mandibular first molar(p<0.05).