• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.197-203
• /
• 2000

Maxillary defect may be induced by trauma, inflammation, cyst, tumor and surgical procedure. In case of limited wall defect, free bone graft has been preferred. But it has some problems such as postoperative bone resorption and soft tissue inclusion to recipient site. And we can not use free bone in the case who has inflammation in the donor site. So we used the micro-titanium mesh as reconstructive material for the maxillary wall defect. We had operated 8 patients who were diagnosed as maxillary partial defects from June 1997 to September 1998 in the Chin-Hae military hospital. They were 1 case of antral wall defect, 1 case of palatal wall defect, 5 cases of infra-orbital wall defects and 1 case of oroantral fistula case. As a result, the micro-titanium mesh has shown the morphological stability and biocompatibility and it could be used in case who has infection. And mesh structure could prevent soft tissue ingrowth to bony defect area. Thus it can be used to the case of maxillary partial defect successfully.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.1
• /
• pp.115-124
• /
• 1994

The purpose of this study was to examine the differences in representation of a globular radiopaque mass on the pantomograms and Waters' views and to compare the efficacy of periapical radiograms, pantomograms and Waters' views in detection of defects on the internal walls of the maxillary sinus. This study was performed with dried human skull. For the study of difference of radiopaque mass shadow in the two views, rubber ball with a diameter of 10㎜ was used as the experimental lesion. It was placed successively on the internal wall of the anterior, posterior, medial, lateral walls and floor of the maxillary sinus. To examine the detectability of defects for radiographic techniques, defects were formed in the anterior, posterior, medial, lateral walls, and floor of the maxillary sinus. They were formed with 0.5㎜, 0.75㎜, 1.0㎜, 2.0㎜ and 3.0㎜ sized steel round burs with a slow speed dental handpiece. By subsequently plugging the holes with zinc oxide eugenol paste, radiopaque defects were produced. After that the periapical radiograms, the pantomograms and the Waters' views were taken each and every defect. The obtained results were as follows: 1. Rubber balls placed on each internal wall of the maxillary sinus were correctly depicted on the posterior wall and the floor in case of the pantomogram, and on the anterior wall and the medial wall in case of the Waters' view. 2. On the detectability of defects for each radiographic technique, radiolucent defects were detected in different places for each technique. Periapical radiogram could detect 1.0㎜ defect on the floor of the maxillary sinus, pantomogram could detect 2.0㎜ defect on every internal wall of the maxillary sinus, and Waters' view could detect 3.0㎜ defect on the anterior wall of the maxillary sinus. 3. On the detectability of defects for each radiographic technique, radiopaque defects were detected in different places for each technique. Periapical radiogram could clearly detect 0.5㎜ defect on the floor of the maxillary sinus, pantomogram could detect 0.5㎜ defect on every internal wall of the maxillary sinus, and finally Waters' view could detect 0.5㎜defect on the anterior wall of the maxillary sinus but 0.75㎜ defect on the anterior wall, lateral wall and floor of the maxillary sinus. As the result, the periapical radiogram is the most simple and satisfactory method for investigating in the maxillary sinus. The pantomogram is suitable method for screening of changes in the maxillary sinus. And the Waters' view is available for detect of lesion in the anterior wall of the maxillary sinus. For the purpose of accurate diagnosis and evaluation of lesion in the maxillary sinus, these techniques supplement each other.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.691-694
• /
• 2011

Purpose: With an increase in the population of immunocompromised patients, the incidence of maxillary sinus aspergillus infection has also escalated. Maxillary sinus aspergillosis is generally extended to the sinus antrum, base or thin orbital wall and ethmoid air cell region. We experienced a case of maxillary sinus aspergillosis which was extended directly to the soft tissue of the cheek. Methods: A 46-year-old man with acute myelogenous leukemia was consulted for the defect of the anterior wall of the maxillary sinus, and cheek. Radiologic and histologic findings were consistent with invasive maxillary sinus aspergillosis. The otolaryngology department performed debridement via endoscopic sinus surgery first. Coverage of the resulting defect in the anterior wall of the maxillary sinus and its inner layer was undergone by the plastic and reconstructive surgery department, using a pedicled superficial temporal fascia flap and a split thickness skin graft. The remaining skin defect of the cheek was covered with a local skin flap. Results: The patient went through an uneventful recovery. There was no recurrence during 6 months of follow-up. Conclusion: Maxillary sinus aspergillosis usually involves the orbit or the gingiva but in some cases it may directly invade soft tissues of the cheek. Such an atypical infection extending into the cheek may lead to a large soft tissue defect requiring coverage. Thus, any undiagnosed soft tissue defect involving the cheek or maxillofacial area, especially in immunocompromised patients, should be evaluated for aspergillosis. We present this rare case, with a review of the related literature.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.4
• /
• pp.301-307
• /
• 2004

The flap considered at first for the reconstruction of large maxillary defect, especially mid-face defect, is scapular free flap, because it provides ample composite tissue which can be designed 3-dimensionally for orbital, facial and oral reconstruction. In case of maxillary defect involving hard palate, however, this flap has some limitations. First, its bulk prevents oral function and physio-anatomic reconstruction of nasal and oral cavity. Second, mobility and thickness of cutaneous paddle covering the alveolar area reduce retention of tissue-supported denture and give rise to peri-implantitis when implant is installed. Third, lateral border of scapula that is to reconstruct maxillary arch and hold implants is straight, not U-shaped maxillary arch form. To overcome these problems, new concept of step prefabrication technique was provided to a 27-year-old male patient who had been suffering from a complete hard palate and maxillary alveolar ridge defect. In the first stage, scapular osteomuscular flap was elevated, tailored to fit the maxillary defect, particulated autologous bone was placed subperiosteally to simulate U-shaped alveolar process, and then wrapped up with split thickness skin graft(STSG, 0.3mm thickness). Two months later, thus prefabricated new flap was elevated and microtransferred to the palato-maxillary defect. After 6 months, 10 implant fixtures were installed along the reconstructed maxillary alveolus, with following final prosthetic rehabilitation. The procedure was very successful and patient is enjoying normal rigid diet and speech.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.1
• /
• pp.44-48
• /
• 2011

Maxillary defects are inherently complex because they generally involve more than one midfacial component. In addition, most maxillary defects are composite in nature, and often require bony support, as well as a mucosal lining for reconstruction. Therefore, midfacial bone and soft tissue defects present a unique challenge because they require a complex arrangement of tissues in a relatively limited space. This might be difficult to achieve only with free osteocutaneous flaps. The use of bone grafts allows greater flexibility in a reconstruction but is limited by graft resorption. We report a case of a patient reconstructed with a lateral arm free flap, iliac bone graft, sagital split ramus osteotomy for the reconstruction of a right maxillary defect zygomatico-maxillary defect caused by a zygomatico-maxillary malignant tumor resection.

• The Journal of the Korean dental association
• /
• v.49 no.9
• /
• pp.527-534
• /
• 2011

Microvascular reconstruction of maxillary composite defect after oncologic resection has improved both esthetic and functional aspect of quality of life of the cancer patients. However, a lot of patients had prior surgery with radiation and/or chemotherapy as a part of comprehensive cancer treatment. Sometimes it is nearly impossible to find out adequate recipient vessel for maxillary reconstruction with microvascular anastomosis. Therefore long pedicle of the flap is needed to use distant neck vessels located far from the reconstruction site such as ipsilateral transverse cervical artery or a branch of contralateral external carotid artery. For this reason, although we know the treatment of the choice is osteocutaneous flap, it is difficult to use this flap when we need long pedicle with complex three dimensional osseous defect. Vascular option for these vessel-depleted neck patients can be managed by a soft tissue reconstruction with long vascular pedicle and additional free non-vascularized flap that is rigidly fixed to remaining skeletal structures. For this reason, maxillofacial reconstruction by vascularized soft tissue flap with or without the secondary restoration of maxillary bone with non-vascularized iliac bone can be regarded as one of options for reconstruction of profound maxillofacial composite defect resulted from previous oncological resection with chemo-radiotherapy.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.1
• /
• pp.70-74
• /
• 2016

In the maxillary anterior region, reconstruction of the localized alveolar ridge defect is very important in enhancing the esthetics of fixed partial denture. A 40-year-old female patient presented with a chief complaint of the inconvenience and unesthetic problem of 3-unit maxillary anterior prosthesis due to alveolar ridge resorption. After removal of old prosthesis, intraoral examination revealed moderate (buccolingually 4 mm) ridge deficiency in missing tooth region, leading to the diagnosis of Class I alveolar ridge defect. One of the reconstruction techniques to overcome this problem might be a technique that combines two types of soft tissue augmentation techniques. The purpose of this paper was to demonstrate the new combined technique of roll flap and combination onlay-interpositional graft utilized to acquire sufficient dimension of recipient area by one time of operation and to present the esthetic improvement of fixed partial denture by using this procedure in case of maxillary anterior localized ridge defect.

• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.524-527
• /
• 2007

Purpose: Globe displacement due to a blowout fracture is a rare clinical phenomenon. The authors present reduction of a globe displacement to the maxillary sinus due to trauma suffered in a fall and the reconstruction of a large defect left in the medial and inferior orbit. Methods: A 39-year-old male patient was unable to open his left eye after being struck on the periorbital area by a metal edge. Laceration was not noted in that area but we were unable to observe the intraorbital globe. A facial computed tomography (CT) scan showed that the globe was displaced through the maxillary sinus. A transconjunctival approach was used to access the infraorbital margin and the globe entrapped in the inferior margin of the orbit was successfully reduced. A large defect in the medial and inferior orbit was reconstructed using a graft from the iliac bone. Results: In 5 months after the operation, no atrophy of the globe was seen. Both sides retained a similar shape. A satisfactory functionality outcome in terms of improved extraocular muscle movement, and a satisfactory aesthetical outcome were achieved. Conclusion: The authors report the reduction of a globe displaced to the maxillary sinus following a fall and the reconstruction of the large defect left in the medial and inferior orbit.

• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.448-454
• /
• 2007

Purpose: The objective of this study was to evaluate the outcomes of using the free flap in the reconstruction of maxillary defects. Methods: 27 consecutive cases of maxillary reconstruction with free flap were reviewed. All clinical data were analyzed, including ideal selection of flap, time of reconstruction, recurrence of cancer, postoperative complications, flap design, and follow-up results. The main operative functional items, including speech, oral diet, mastication, eye globe position and function, respiration, and aesthetic results were evaluated. Results: Among the 24 patients who underwent maxillary reconstruction with the free flap, 14 patients underwent immediate reconstruction after maxillary cancer ablation, and 10 patients underwent delayed reconstruction. There occurred 1 flap loss. Recurrences of the cancer after the reconstruction happened in 2 cases. Postoperative complications were 3 cases of gravitational ptosis of the flap, 2 cases of the nasal obstruction, and 1 case of fistula formation. Out of 27 free flaps, there were 15 latissimus dorsi myocutaneous flaps, 5 radial forearm, 4 rectus abdominis myocutaneous flaps, 1 scapular flap, 2 fibula osteocutaneous flap, respectively. Flaps were designed such as 1 lobe in 9 cases, 2 lobes in 9 cases, and 3 lobes in 5 cases. Among the 14 patients who had intraoral defect or who had palatal resection surgery, 2 patients complained the inaccuracy of the pronunciation due to the ptosis of the flap. It was corrected by the reconstruction of the maxillary buttress and hung the sling to the upper direction. All of the 14 patients were able to take unrestricted diets. In 6 patients who had reconstruction of inferior orbital wall with rib bone graft, they preserved normal vision. Aesthetically, most of the patients were satisfied with the result. Conclusion: LD free flap is suggested in uni-maxilla defect as the 1st choice, and fibular osteocutaneous flap and calvarial bone graft to cover the larger defect in bi-maxilla defect.

• Korean Journal of Head & Neck Oncology
• /
• v.20 no.1
• /
• pp.41-43
• /
• 2004

An advanced maxillary sinus cancer requires an extensive ablation that results an extensive facial deformity, including a skin defect. Reconstruction has to be considered in a radical maxillectomy, especially with skin defect may be accomplished in one stage with a microsurgical free transfer of a latissimus dorsi flap. A man of right maxillary sinus cancer, squamous cell carcinoma, 47 years old of age, had soft tissue invasion of the cheek region. He underwent a radical maxillectomy with extensive skin excision. The maxillectomy and skin defects were reconstructed with the double skin island latissimus dorsi myocutaneous free flap. The cosmetic result and the functional outcome of the nose were thought to be considerably satisfied.