• The korean journal of orthodontics
• /
• v.42 no.2
• /
• pp.87-93
• /
• 2012

Objective: The purpose of this study was to investigate the antimicrobial effect of silverized elastomers on mutans streptococci in dental plaque. Methods: Forty patients undergoing orthodontic treatment were randomly placed into 1 of 2 groups. We examined the maxillary right and left central incisors and premolars, and the mandibular right and left canines of all participants. We ligated the right maxillary and left mandibular teeth of the participants in group 1 with silverized elastomers and ligated their contralateral teeth with conventional elastomers. We ligated the left maxillary teeth and right mandibular teeth of group 2 participants with silverized elastomers. Each participant visited the clinic 4 times at 3-week intervals. We applied the elastomers to the teeth on one side of each patient's mouth during their first visit. During the second visit, the elastomers were removed for microbiological analysis and replaced with steel ligatures. During the third visit, we used silverized elastomers to ligate the teeth contralateral to those treated on the first visit. The elastomers were removed during the fourth visit, and microbiological analyses were performed. We compared the quantity of bacteria on silverized and conventional elastomers at the 0.05 level of significance. Results: The percentage of mutans streptococci was not significantly different in cultures of dental plaque from the silverized and the conventional elastomers (p > 0.05). Conclusions: There was no significant difference between the antimicrobial effect of the silverized elastomers and that of the conventional elastomers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.303-316
• /
• 1993

The purpose of this study was to analysis the stress distribution induced by three unit PFM bridges and various cantilever bridges replacing maxillary latersal incisor. The simplified two-dimensional photoelastic models used for this study was contructed in the folio- wing way. CR/R ratio was designed to be 1 : 1, 1 : 1.25 and 1 : 1.5. The pontics of cantilever bridge supported by maxillary canines consisted of wrap-around type, rest-extension type, and simple type. 3-unit PFM bridge was constructed with traditional method. 1kg vertical static load was applied on the center of the incisal edge of the pontic. The stress pattern was examined and recorded by photography. The results obtained were as follows ; 1. The magnitude of stress on the abutment root apex area of a traditional 3-unit bridge was the lowest. 2. The model of cantilevered pontic with a rest showed the relatively well distributed stress around the abutment tooth. The model with simple pontic generated the greatest stress concentration in the supporting structure of the abutment tooth. 3. As the height of bone level reduced, the rotational and vertical force increased around the abutment tooth. 4. The stress concentration of the 3-unit bridges occured on the root apex and stress concentration of the cantilever briage occured on the root apex and cervix area, 5. In the case of the cantilever bridge, stress concentrated distally on the root apex area of the abutment tooth and additional stress was observed mesially on the upper part of the root. Especially in the case of the simple pontic, was phenomenon was more apparent than the others. 6. Force applied to cantilevered pontic was transmitted to the adjacent central incisor through the contact surface. Stress was markedly observed on the mesial cervix area in the case of simple pontic and on the root apex area in the case of wrap-around type and rest-extension type.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.247-254
• /
• 1987

This study was undertaken to determine the adequate bracket slot torque degrees in Korean The subjects were consisted of plaster casts of 30 male and 30 female They had acceptable profile, normal occlusion, no loss of tooth and no experience of dental treatment Labiolingual or buccolingual inclinations of individual tooth were estimated as +, - degrees on the fixed model by use of dental surveyor, contact angle gauge and measuring grid The following conclusions were obtained 1 Adequate degrees of bracket slot torque in Korean were obtained 2 The degrees of labiolingual or buccolingual inclination of every tooth were very variable according to the individuals 3 Almost constant torque degrees were observed on the maxillary buccal segments 4 Progressive increase in minus torque degrees were observed from the mandibular canines to the 2nd molars.

• Journal of Korean Dental Science
• /
• v.9 no.2
• /
• pp.63-68
• /
• 2016

Pressure root resorption can be observed during the eruption of permanent dentition, especially of the maxillary canines (affecting lateral incisors) and mandibular third molars (affecting mandibular second molars). Since the cause of root resorption of the adjacent affected teeth is evident, treatment simply involves extraction of the impacted tooth. However, there have been few reports on the prognosis of the remaining resorbed tooth, as dentists often choose to extract them when damage due to root resorption is observed. We report a case involving a tooth that was severely resorbed due to pressure from an adjacent impacted tooth. After extraction of the impacted tooth, the remaining tooth retained vital pulp and survived as a functional tooth.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.526-536
• /
• 2004

This study was undertaken to determine the effect of a 2.2mg/Kg/day intraoral administration of NaF on the amount of root resorption and osteoclastic activity during or after a rapid maxillary expansion procedure. Ten puerile female dogs were divided into two groups: a control group and a NaF-treated group. A fixed type maxillary expansion device was delivered to all dogs. The appliance was activated twice daily throughout a 20-day period, causing a 5-mm expansion of maxillary bone. After the expansion procedure, the animals were sacrificed at days 0, 15, 30, 45, and 60 of the retention period. The buccal surface of the root of each maxillary canine was examined by means of a surface electron microscope (SEM). Using SEM, web-like resorption lacunae were observed on the bone or the tooth surface at the site of osteoclastic activity; these observations were verified by histological methods. No peculiar resorption lacunae were found in the apical tip of the roots of either the control group or the NaF-treated group animals. The NaF-treated retention group was found to have less resorption lacunae formation on day 45 and day 60. The preventative effect of NaF on resorption lacunae formation on the surface of the bone covering the anchor tooth was confirmed. Larger areas of resorption lacunae were found on the surface of the bone covering the canines in the control group animals, as compared to those of the NaF-treated group, especially on day 30 and day 60. Using SEM, the present study revealed a difference between the control group and the NaF-treated group in the prevalence and the size of the resorption lacunae formation on the cemental root surface. The preventative effect of NaF on bone resorption was confirmed. Further studies concerned with the optimum concentration of NaF that has an effect in vivo are necessary.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.3
• /
• pp.125-134
• /
• 2024

Purpose: The aim of this study was to determine which scan range would provide the most accurate bite registration when performing a bite scan after scanning an upper and lower arch using an intraoral scanner. Materials and Methods: The occlusal contact points were recorded using articulating paper for 30 adults, and the results of various ranges of buccal bite scan were compared based on this. Buccal bite scan of 5 ranges (1st premolar to 2nd premolar, 1st premolar to 1st molar, 1st premolar to 2nd molar, 2nd premolar to 1st molar, and canines to another side canine of the maxillary teeth) was performed, and then the buccal bite scan file was used in a CAD program to confirm the occlusal area in the scan file through data editing and alignment, leaving the buccal area of the teeth. Afterwards, the degree of agreement between the occlusal contact points obtained from the articulating paper and the occlusal area obtained from the scan file was compared, and statistical analysis was performed using the homoscedastic T-test (α = 0.05). Results: The alignment success and alignment failure rates among each group were 77.23% and 40.85% in canine to another side canine, 68.23% and 28.89% in bilateral first premolar to second premolar, 63.76% and 29.97% in bilateral first premolar to first molar, 61.31% and 32.04% in bilateral first premolar to second molar, 67.55% and 27.46% in second premolar to first molar. The results of the anterior scan of both canines showed higher alignment success and failure rates compared to the scan results of all maxillary posterior teeth. In the alignment success rate, statistical significance was not found depending on the scan range of the posterior teeth, but in comparing the results of the posterior teeth and both canines, statistical significance was observed except for the scan results of the second premolar to the first molar. There was no statistical significance in the alignment failure rate depending on the scan range of the posterior teeth, and statistical significance was observed in the results of the posterior teeth and both canines. Conclusion: When taking a buccal bite scan, in the case of scanning the anterior teeth, more occlusal area appear than when scanning the posterior teeth, and in the case of scanning the posterior teeth, there is no significant difference in the bite registration depending on the scan range.

• The korean journal of orthodontics
• /
• v.24 no.1 s.44
• /
• pp.149-159
• /
• 1994

The purposes of present study were to evaluate changes in models and lateral cephalometric head films during orthodontic treatment and to compare the amount of incisal retraction and anterior movement of molars with the two approaches of the retraction method of canine(sectional canine retractions vs sliding canine retractions) and the anchorage management(head gears vs no head gears, transpalatal arches vs no transpalatal arches and lingual arches vs no lingual arches) and to evaluate changes during orthodontic treatment in models with relation to lateral cephalometric head films. 67 Korean women with Angle's Class I bialveolar protrusion were selected, whose initial chronologic age was above 16 yrs. Models and lateral cephalometric head films were taken before and after orthodontic treatment with four bicuspid extraction. the results were obtained as follows. 1. Significant decreases were observed in intermolar width, arch length and arch perimeter of maxilla and mandible but significant difference was not observed in intercanine width of maxilla and mandible during treatment period. 2. The linear change of the upper incisor to upper lip was 2.84:1 and the linear change of the lower incisor to lower lip was 1.45:1 3. There were no significant differences between the two groups(sectional canine retractions vs sliding canine retractions), the !we groups(transpalatal arches vs no transpalatal arches) and the two groups(lingual arches vs no lingual arches) in the amount of incisal retraction and anterior movement of molars. There were a greater amount of maxillary incisal retraction and a lesser amount of anterior movement of maxillary molars with the use of head gears than no use of head gears. 4. Changes during orthodontic treatment in models with relation to lateral cephalometric head films were obtained as follows : 1) Maxilla Central incisors were moved 3.79mm backward, canines were moved 0.22mm laterally and 3.70mm backward, and molars were moved 0.535mm medially and 2.29mm forward. 2) Mandible Central incisors were moved 3.04mm backward, canines were moved 0.145mm laterally and 3.92mm backward, and molars were moved 0.755mm medially and 1.77mm forward.

• Journal of Periodontal and Implant Science
• /
• v.45 no.5
• /
• pp.162-168
• /
• 2015

Purpose: The aim of this study was to analyze the anatomical dimensions of the buccal bone walls of the aesthetic maxillary region for immediate implant placement, based upon cone-beam computed tomography (CBCT) scans in a sample of adult patients. Methods: Two calibrated examiners analyzed a sample of 50 CBCT scans, performing morphometric analyses of both incisors and canines on the left and right sides. Subsequently, in the sagittal view, a line was traced through the major axis of the selected tooth. Then, a second line (E) was traced from the buccal to the palatal wall at the level of the observed bone ridges. The heights of the buccal and palatal bone ridges were determined at the major axis of the tooth. The buccal bone thickness was measured across five lines. The first was at the level of line E. The second was at the most apical point of the tooth, and the other three lines were equidistant between the apical and the cervical lines, and parallel to them. Statistical analysis was performed with a significance level of $P{\leq}0.05$ for the bone thickness means and standard deviations per tooth and patient for the five lines at varying depths. Results: The means of the buccal wall thicknesses in the central incisors, lateral incisors and canines were $1.14{\pm}0.65mm$, $0.95{\pm}0.67mm$ and $1.15{\pm}0.68mm$, respectively. Additionally, only on the left side were significant differences in some measurements of buccal bone thickness observed according to age and gender. However, age and gender did not show significant differences in heights between the palatal and buccal plates. In a few cases, the buccal wall had a greater height than the palatal wall. Conclusions: Less than 10% of sites showed more than a 2-mm thickness of the buccal bone wall, with the exception of the central incisor region, wherein 14.4% of cases were ${\geq}2mm$.

• Journal of Periodontal and Implant Science
• /
• v.35 no.3
• /
• pp.761-776
• /
• 2005

The purpose of the present study was to examine the relationship between the form of the clinical crowns in the maxillary anterior segment and the clinical feature of gingiva such as morphological characteristics and the gingival thickness. Fifty periodontally healthy subjects were clinically examined regarding the probing depth, the thickness of the free gingiva, and the width of the keratinized gingiva. From study models of the maxillary anterior region, the width at cervical third(CW) and the length(CL) of the clinical crown, the papillary height, and the gingival angle of the 6 anterior teeth were measured. Each tooth was classified into 4 groups (longnarrow, NL; narrow, N; wide, W; short-wide, WS) according to CW/CL ratio and all the data were compared between groups NL and WS using independent t-test. Stepwise multiple regression analysis was performed for each tooth region with the gingival thickness at the level of sulcus bottom, the width of keratinized gingiva, and gingival angle as the dependent variables. As the results, the NL group of the upper anterior teeth displayed, higher papilla height, and narrower keratinized gingiva, more acute gingival angle resulting in pronounced "scalloped" contour of the gingival margin, compared to the WS group. There was no significant difference between groups NL and WS with respect to probing depth and the gingival thickness. The regression analyses demonstrated that the gingival thickness in central incisors was significantly associated to the mesio-distal width and bucco-lingual width of the crown, and labial probing depth. The width of keratinized gingiva was significantly associated with labial probing depth in central incisors and with proximal probing depth and gingival angle in lateral incisors, and with labial and proximal probing depth, and gingival angle in canines. The gingival angle was significantly associated with papillary height and CW/CL ratio and additionally with proximal probing depth in central incisors, with the width of keratinized gingiva in lateral incisors, and with labial probing depth and the width of keratinized gingiva in canines. These results indicate that the form of clinical crown in upper anterior region could influence the clinical feature of gingiva and the influencing factors might be different according to the tooth region.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.30-44
• /
• 2006

This study was performed to investigate the location of the ideal bracket positioning plane in lingual orthodontics using the three-dimensional finite element method. Displacement of the anterior teeth were evaluated according to the vertical and the angular movements of the bracket positioning plane. To achieve the ideal movement of anterior teeth in the lingual central plane, the location of the force application point and the amount of the moment applied to the four incisors were evaluated. As the bracket positioning plane was moved parallel toward the incisal edge, uncontrolled tipping and extrusion of the maxillary and the mandibular incisors were increased. But lingual tipping of the crown was decreased in the maxillary and the mandibular canines. As the bracket positioning plane was inclined toward the incisal edge, lingual tipping was increased in the 6 anterior teeth and extrusion of incisors and intrusion of the canine was also increased. As the retraction hook of the canine bracket was elongated, lingual tipping and extrusion of the central incisor and mesial movement and extrusion of the lateral incisor were increased. In the canine, mesial and labial movements of the crown were increased. When the moment was applied to the 4 incisors of the maxillary and the mandibular arch in the lingual central plane, 280 gf-mm in the maxillary central incisor, 500 gf-mm in the maxillary lateral incisor, 170 gf-mm in the mandibular central incisor and 370 gf-mm in the mandibular lateral incisor produced bodily movement of the individual tooth.