• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권5호
• /
• pp.390-398
• /
• 2005

Purpose: The aim of this study was to evaluate the skeletal and dentoalveolar dimensional changes following surgically-assisted rapid maxillary expansion (SARME). Patients & methods: Thirteen adults who had been treated by SARME for transverse maxillary deficiency from May 2000 to December 2003 were evaluated. The SARME procedure was the subtotal Le Fort I osteotomy combined with pterygomaxillary separation and anterior midpalatal osteotomy. Dental study casts and posteroanterior cephalometric radiographs were taken before operation, after removal of expansion device, and follow up period. Nasal cavity width, skeletal and dentoalveolar parameters were measured pre- and post-operatively. Results: 1. Mean nasal cavity width was increased 12%$(0{\sim}21%)$ of total expansion after retention. 2. Mean maxillary interdental width was increased 70%$(47{\sim}99%)$, 95%$(84{\sim}115%)$, and 77%$(57{\sim}94%)$ of total expansion in the canine, the first premolar, and the first molar region, respectively after retention. 3. Mean maxillary alveolar bone width was increased 66%$(42{\sim}84%)$, 74%$(42{\sim}94%)$, and 57%$(31{\sim}78%)$ of total expansion in the canine, the first premolar, and the first molar region, respectively after retention. 4. Mean palatal vault depth was decreased 1.3 mm ($0.5{\sim}2.0$ mm) after retention. 5. Mean interdental and alveolar bone width of the mandibular canine and intermolar width of mandible were slight increased as maxilla was expanded after retention. 6. There were statistical differences between preoperative and postoperative values of nasal cavity, all maxillary interdental and interalveolar widths, palatal vault depth, mandibular interdental and interalveolar width of canine(paired t-test, p<0.05). 7. The maxillary interdental and alveolar bone width were decreased approximately 25% of total expansion by relapse at follow up period. Conclusion: In conclusion, most amounts of maxillary interdental expansions were acquired with the expansion of the maxilla by SARME. For preventing the relapse, approximately 25% of the overexpansion was needed.

• Journal of Periodontal and Implant Science
• /
• 제28권2호
• /
• pp.321-337
• /
• 1998

The aims of this study were firstly to investigate soft tissue reactions around single implant-supported crowns and secondly to compare soft tissue dimensions and conditions of the crowns in relation to interdental papillae, and lastly to investigate patients'esthetic satisfaction with their single implant-supported crowns according to the interdental papillae presence/absence. Twenty-nine patients (41 implants) whose single missing tooth in the maxillary anterior region had been replaced by single implant-supported crown participated for the study and various variables of soft tissue conditions, dimensions and crown dimensions were measured around the single implant-supported crowns at clinical examination and from study models and slides. The results showed that the soft tissue conditions around the single implantsupported crowns were similar to those around implants used for partially or totolly edentulous patients. Except for the high frequency of bleeding on probing, all other parameters revealed healthy conditions. The buccal sites of the crown had a shallow pocket comparing with other sites. At all sites of the crown, similar status of little inflammation was found. Mesial sites and central-incisor positioned implantsupported crowns had lower contact point position than distal sites and lateral-incisor positioned crowns, respectively. Mucositis index, probing depth and contact point position were significantly correlated with papillae index(p < 0.05). More inflammation and lower contact point position were found at the implant-supported crown with no interdental space than that with interdental space. Patients showed high esthetic satisfaction regardless of interdental space presence. The result indicated that, despite of their submucosal crown margins, single implantsupported crowns have soft tissue conditions as good as other implants used for the treatment of the different types of edentulism and a clinician can manipulate interdental papilla height by modifying crown shapes within the limits of not violating total esthetics.

• 대한치과교정학회지
• /
• 제36권5호
• /
• pp.388-396
• /
• 2006

전치부 치성 보상기전과 장안모를 보이는 하악전돌증례에서 악교정 수술전 교정치료과정과 치료결과를 보이고자한다. 악교정 수술전 교정치료로 장안모의 해결을 위해 구개 정중부에 mini-implant를 식립하여 상악 구치부를 압하하였고, 하악전치부 치성보상을 해결하기 위해 하악 좌우측 견치와 제1소구치 사이에 mini-implant를 식립하여 하악전치의 순측경사를 유도하였다. 그 결과 하악골 후퇴술만 시행하였음에도 수평, 수직적으로 조화로운 안모를 얻을 수 있었다. 치료기간은 11개월이 소요되었으며, 치료 후 18개월 후에도 안정적인 교합이 유지되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권1호
• /
• pp.77-80
• /
• 2010

Plasma cell myeloma is malignant disease of plasma cell in the bone marrow. Myeloma accounts for about 1% of all cancers. The solitary plasma cellmyeloma is rare tumors and account for less than 10% of plasma cell neoplasm. It is often progress to multiple myeloma at 30-40% despite successful local treatment with surgery and radiation therapy. We are reporting a case of solitary plasma cell myeloma on anterior maxillary region that developed after kidney transplantation and immunosuppressive therapy.

• 대한치과교정학회지
• /
• 제16권1호
• /
• pp.71-84
• /
• 1986

The purpose of this study was to analyze the effect of orthopedic forces on the craniofacial complex utilizing the three kinds of the head gear. (high pull head gear, straight pull head gear, cervical pull head gear) For this study, the teeth and alveolar bone and palate were reproduced from birefringent materials and other parts of craniofacial complex were coated with birefringent material on the model. The effect of orthopedic forces on the craniofacial complex was analyzed by photoelastic method using transmission polariscope and reflection polariscope. The results were as follows. 1. The cervical pull head gear had the greatest tipping effect on the maxillary molars and high pull head gear had the least tipping effect. 2. In areas stressed, the cervical pull head gear stressed the greatest degree. 3. Only cervical pull head gear produced stress at the zygomaticofrontal suture and the posterior region of palate. 4. The straight pull head gear and high pull head gear produced stress at just inferior to the anterior nasal spine. 5. The cervical pull head gear and straight pull head gear produced tensile stress at the fronto-maxillary suture. 6. The pterygoid plates of the sphenoid bone, the zygomatic arches, the junction of the maxilla with the lacrimal and ethmoid bone, and the maxillary molars were affected by three types of head gear.

• 대한소아치과학회지
• /
• 제26권4호
• /
• pp.630-635
• /
• 1999

치아의 전위는 매우 드문 치아 기형의 하나로서 발생 또는 맹출중 인접한 2개의 영구치의 위치가 서로 바뀐것을 말한다. 전위는 상악과 하악 모두에서 발생 가능한데 그중에서 상악에서의 발생이 더 흔하며 상악견치는 가장 호발하는 치아이다. 상악에서는 상악 견치와 제 1 소구치와의 전위가 가장 빈도가 높고 그 다음으로 상악 견치와 측절치와의 전위가 많다. 전위는 완전 전위와 불완전 전위로 나눌수 있는데 완전 전위는 치관뿐 아니라 치근의 위치까지 전위된 경우를 말하고 불완전 전위는 치근의 위치는 정상이고 치관만 전위된 경우이다. 전위의 원인에 대하여 명확하게 밝혀진 것은 없으나 유치의 만기잔존이나 조기상실, 발생중의 전위나 정상 맹출 경로로부터의 이탈, 유치열시기의 안면외상 등이 제기되고 있고 이밖에 과잉치, odontoma 또는 odontogenic cyst, 염증성 병소 등을 그 원인으로 생각해 볼 수 있다. 본 증례는 유치열시기의 안면외상으로 인하여 상악 영구 견치와 측절치의 전위가 발생한 경우로서 치료후 전위된 위치로의 양호한 배열을 이루었다.

• Journal of Periodontal and Implant Science
• /
• 제36권1호
• /
• pp.147-154
• /
• 2006

Surgical intervention in the posterior maxillary region requires detailed knowledge of maxillary sinus anatomy and the possible anatomical variations. This study evaluated the incidence, location of maxillary sinus septa by using radiographic (panoramic radiography and computed tomography) findings and comparison of panoramic radography with CT in antral anatomical variation. This study was based on data from 70 sinuses in partial dentate maxilla. The sample consisted of 61 patients(25 women and 36 men, with ages ranging between 19 and 77 years and a mean age of $49.4{\pm}11.3$ years) who were being treatment-planned to receive implant-supported restorations. First, the panoramic images were examined for the presence of antral septa by radiologist and examiner who don't know about CT findings. And incidence of antral septa was evaluated using an axial plane of CT image. The incidence of septa was compared between panoramic radiography and CT. The accuracy of the incidence was compared between radiologists and dentists. A total of 20 septa were found in 70 sinuses on CT image and the prevalence of one or more septa per sinus was found to be 28.6%. The assumed incidence of septa on panoramic radiography was $27.6%{\pm}2.2%$ in radiologist and $31.9%{\pm}5.8%$ in dentists. Erroneous diagnosis rate was 11.42% in radiologist and 15.96% in dentists. 40% of antral septa were located in the anterior(premolar) region, 30% of septa were located in the middle(first molar) and posterior(second molar) region separately. Prior to implant placement, it seems appropriate to consider panoramic radiography as a standard radiographic examination and periapical radiographs may be used to complete the findings in regions not sharply depicted in the panoramic radiograph. And cross-sectional imaging should be used in sites with severe bone loss and close proximity of the maxillary sinus.

• Imaging Science in Dentistry
• /
• 제47권2호
• /
• pp.69-74
• /
• 2017

Purpose: The nasopalatine canal is a well-known, important anatomical structure in the anterior maxilla, but this region contains many accessory canals. The canalis sinuosus (CS) is one of these canals; it contains the anterior superior alveolar nerve, along with veins and arteries. The purpose of this study was to evaluate the CS using cone-beam computed tomography (CBCT) in patients with maxillary impacted canines. Materials and Methods: A total of 111 patients admitted to the Istanbul Medipol University School of Dentistry for the exposure, orthodontic treatment, and/or extraction of an impacted canine were included in this study. CBCT images were obtained for these patients under standard conditions. Axial, coronal, and sagittal sections were evaluated to assess the prevalence of CS, the direction and diameter of the canal, its relation with the impacted canine, and its distance from the alveolar crest. Further, possible correlations with patient gender and age were analyzed. Results: The CS could be detected bilaterally in all the evaluated tomography images. The mean canal diameter was significantly larger in males than in females(P=.001). The CS ran significantly closer to the impacted canine when the canal was located horizontally (P=.03). Variations of the canal, such as accessory canals, were identified in 6 patients. Conclusion: CS is an anatomical entity that may resemble periapical lesions and other anatomical structures. Evaluation with CBCT prior to surgical procedures in the anterior maxilla will help to prevent overlooking such anatomical structures and to decrease possible surgical complications.

• 대한치과보철학회지
• /
• 제58권3호
• /
• pp.244-250
• /
• 2020

상악 전치부에서 임플란트의 순구개측 식립 위치는 보철물의 심미성을 결정하는 중요한 요소이다. 그러나 상악 전치부의 얇은 순측골은 발치 후에 상당한 양이 흡수되어, 임플란트가 이상적 식립 위치보다 구개측에 식립될 수 있다. 본 상악 중절치 상실 증례들에서 다소 구개측에 식립된 임플란트의 보철 수복을 위하여 UCLA 지대주를 이용하였다. 또한 타과와 협진으로 발치 후 흡수된 치조골 외형과 치은의 형태 회복을 위하여 골유도재생술을 시행하였고, 인접전치를 재배열 하였다. 충분한 임시 보철물 수복 기간으로 치은 형태의 심미적 회복을 확인한 뒤에 최종 보철 시행하였으며, 임플란트 보철을 통한 치아 상실 부위의 기능, 심미 회복이 만족할 만한 결과를 보였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.43.1-43.5
• /
• 2019

Background: Reconstructive surgery is often required for tumors of the oral and maxillofacial region, irrespective of whether they are benign or malignant, the area involved, and the tumor size. Recently, three-dimensional (3D) models are increasingly used in reconstructive surgery. However, these models have rarely been adapted for the fabrication of custom-made reconstruction materials. In this report, we present a case of maxillary reconstruction using a laboratory-engineered, custom-made mesh plate from a 3D model. Case presentation: The patient was a 56-year-old female, who had undergone maxillary resection in 2011 for intraoral squamous cell carcinoma that presented as a swelling of the anterior maxillary gingiva. Five years later, there was no recurrence of the malignant tumor and a maxillary reconstruction was planned. Computed tomography (CT) revealed a large bony defect in the dental-alveolar area of the anterior maxilla. Using the CT data, a 3D model of the maxilla was prepared, and the site of reconstruction determined. A custom-made mesh plate was fabricated using the 3D model (Okada Medical Supply, Tokyo, Japan). We performed the reconstruction using the custom-made titanium mesh plate and the particulate cancellous bone and marrow graft from her iliac bone. We employed the tunneling flap technique without alveolar crest incision, to prevent surgical wound dehiscence, mesh exposure, and alveolar bone loss. Ten months later, three dental implants were inserted in the graft. Before the final crown setting, we performed a gingivoplasty with palate mucosal graft. The patient has expressed total satisfaction with both the functional and esthetic outcomes of the procedure. Conclusion: We have successfully performed a maxillary and dental reconstruction using a custom-made, pre-bent titanium mesh plate.