• Journal of Biomedical Engineering Research
• /
• v.12 no.1
• /
• pp.9-18
• /
• 1991

A micro- computer system has been designed to evaluate the performance of commercial infant incubator and to develope the temperature controller of new incubator. The measure- ment system used a hybrid of analog electronics for amplification, integration, and switches and micro-computer for data storage, data display, and control of relay. This approach has been applied to measure the warm-up time, temperature stability, open/close door and port- holes, and temperature distribution on the mattress. The micro-computer provides on-line ac cess of multi-point temperature data, simplifies the analog part of the circuit and gives the flexibility.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.211-219
• /
• 1999

Sleeping is important activity in bedroom and it takes one third of our lifetime. The body pressure distribution on bed has been considered as one of the most important factors affecting sleeping comfort. The measurement contact pressure has been applied to design seat, mattress, shoes, etc., for prevention of pressure sores and improvement of products. This paper discusses the recognizing rule of sleeping posture using contact pressure. Subjects' ages are ranged from twenties to fifties. They include 29 males and 35 females. Body pressure distribution is measured in the state of stable bed when subject lies on his/her back, on his/her side and on his/her face. We made recognizing rules of sleeping posture through statistical analysis; ANOVA and regression analysis, qualitative analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.11
• /
• pp.1330-1338
• /
• 2011

Social activities of the elderly have been increasing as our society progresses toward an aging society. As their activities increase, so does the occurrence of falls that could lead to fractures. Falls are serious health hazards to the elderly. Therefore, development of a device that can detect fall accidents and prevent fracture is essential. In this study, we developed a portable fall detection system for the fracture prevention system of the elderly. The device is intended to detect a fall and activate a second device such as an air bag deployment system that can prevent fracture. The fall detection device contains a 3-axis acceleration sensor and two 2-axis tilt sensors. We measured acceleration and tilt angle of body during fall and activities of daily(ADL) living using the fall detection device that is attached on the subjects'. Moving mattress which is actuated by a pneumatic system was used in fall experiments and it could provide forced falls. Sensor data during fall and ADL were sent to computer and filtered with low-pass filter. The developed fall detection device was successful in detecting a fall about 0.1 second before a severe impact to occur and detecting the direction of the fall to provide enough time and information for the fracture preventive device to be activated. The fall detection device was also able to differentiate fall from ADL such as walking, sitting down, standing up, lying down, and running.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.6
• /
• pp.875-887
• /
• 2010

The quantitative effectiveness of powered support surfaces such as APAM in preventing and treating pressure ulcers has not been sufficiently evaluated because of uncertainty of alternating pressure load input and lack of interpretation of dynamic perfusion characteristics of soft tissue. The aim was to verify the dynamic loading effects to sacral tissue perfusion characteristics from alternating set pressure changes. We developed integrated experiment system to supply alternating load to supinely positioned sacrum and concurrently measured $TcPO_2$, $TcPCO_2$ and air cell pressure. Ten aged subjects (5 female, 5 male) were tested with alternating set pressure 20, 30, 40, 50 and 60mmHg. From the dynamic perfusion response eight characteristic parameters were proposed such as average, minimum, maximum and perfusion range regarding to $TcPO_2$ and $TcPCO_2$. A one-way ANOVA was carried out to determine whether the manipulation of alternating set pressure had any effect on $TcPO_2$ and $TcPCO_2$. From the dynamic tissue perfusion response we found mean $TcPO_2$ decreased exponentially as alternating pressure load increased and perfusion range varied mainly because of minimum level change of $TcPO_2$. And perfusion range of $TcPCO_2$ affected by increase of maximum value of $TcPCO_2$. From the results we can get more strict insights about actual physiological dynamic tissue perfusion mechanism under alternating pressure load.

• Journal of Environmental Health Sciences
• /
• v.45 no.2
• /
• pp.99-112
• /
• 2019

Objective: This study aims to analyze the characteristics of airborne radon and thoron level ($Bq/m^3$) generated from household products containing monazites, and estimate the effective doses (mSv/yr). Method: Radon & Thoron detector EQF3220 was used to monitor real-time airborne radon and thoron level ($Bq/m^3$), and their daughters ($Bq/m^3$) were recorded every two hours. Effective doses (mSv/yr) for radon and thoron were estimated according to models developed by International Commission on Radiological Protection (ICRP) and United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR). Results: The average levels of radon and thoron were $87.8Bq/m^3$ (range; $20.8-156.3Bq/m^3$) and $1,347.5Bq/m^3$ (range; $4-5,839.7Bq/m^3$), respectively. The average equilibrium factors (F) were 0.23 and 0.007, respectively. The levels of radon progeny were far higher than that thoron. Latex mattress showed the highest F (0.38). The average effective doses were estimated to be ICRP (1.9 mSv/yr) and UNSCER (1.3 mSv/yr) for radon and UNSCEAR (1.6 mSv/yr) for thoron. Conclusions: Our results have far exceeded the allowable effective dose for general population (1 mSv/yr). The government's actions such as the ban of use of consumer products containing monazite and the establishment of surveillance system to evaluate health effects for the people affected should be taken as early as possible.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.89-95
• /
• 2021

Pressure sores are an unresolved human challenge. In this study, a keyboard-type medical bed was developed and a body pressure sensor was installed to provide a method to control the keyboard so that the pressure sores do not reach the critical pressure. For this, a keyboard-type mattress using a 4bar link is developed, and a method of controlling the height adjustment of the keyboard within the critical pressure through a body pressure sensor is used. There is a feeling of discomfort in the body when the keyboard is raised and lowered from pressure sores, which is an important factor: pressure x time, and only time control is performed, but if the proposed method is used, pressure is controlled within the critical pressure, thereby preventing bedsores in a comfortable state. The effectiveness and validity of the developed medical bed system were verified through theories and experiments.

• 재활복지
• /
• v.18 no.4
• /
• pp.221-235
• /
• 2014

Recently, the frequency of stroke disease is increased due to the rapid aging population, and is contributed to the major occurrence factors of the posteriori acquired disability. This study is about an postural change device for the control of supine posture which is an assisted equipment using in daily rehabilitation process for overcoming the disability by the aftereffects of the stoke disease. In this paper, the existing domestic and Japan postural appliances is examined and its comparison and categorization is performed according to its functions and purposes. Here, in order to control the supine posture state, the design method for advanced multi functional system is proposed, which is devised to have an unified mattress control operations of combining the bedsore prevention tube with the supine posture tilting tube. And also, in addition of an smart function, it is designed to enable to perform an RF functions such as the monitoring of the present device state, the alteration of the basic position and the control of alternative floating and supine posture. This system control hardware consists of three main parts : the sensor detection part, the motor driving /control part, and the system control part for bluetooth communication. In results, we confirmed that the system designed by this research is possible to make it practical as an advanced smart postural change device combined by IoT technology in the application field of the recent IT technology.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.353-359
• /
• 2020

In this study, the controller structure and control algorithm of medical robot bed developed for pressure ulcer prevention and healing are described. The existing pressure ulcer prevention mattress is operated manually and the remaining maximum body pressure exceeds the pressure of ulcer generation, so there is always room for pressure ulcers. However, the system developed in this study does not generate the pressure ulcers because the body pressure drops to zero when the keyboard of the bed descends using the active electric driving keyboard. In addition, even if the bed is raised and the pressure above the critical body ulcer pressure is abnormal, the device and the control algorithm are designed so that the lasting time is within the pressure ulcer generation critical time and the pressure ulcer itself is not generated. The bed key board motor is a motor designed with the BLDC servos suitable for medical use and these can communicate each other easily through CAN(Car Area Network). The system is new medical robot bed that is effective in preventing pressure ulcers and will be distributed to many patients suffering from pressure ulcers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1699-1705
• /
• 2012

This study was conducted to examine the differences of the quality of chest compression between 10 cm higher position of rescuer's knee from the bottom and its bottom position during implementation of CPR. It selected randomly subjects out of 66 students who attend the Dept. of Emergency Medical Technology in G college, G metropolitan city as the first grader and divided them into 31 experimental group and 32 control group from Nov. 8 to 9, 2011. Mattress was spread 10 cm higher from the bottom(material: B4 Copy Paper) and on the bottom(material: PVC, size: $185{\times}125{\times}0.65cm$) and only chest compression was conducted for 2 minutes. Experiment was conducted with 1 Resusci Anne mannequin and the results of experiment were recorded with Laerdal PC Skill Reporting System. Data collected were analyzed with $x^2$-test and Fisher's exact probability test using SPSS 14.0 for Window, Mann-Whitney U-test, and Wilcoxon signed rank test. As a result of the study, it was found that 10 cm higher position of rescuer knee from the bottom than the bottom position and group below 170 cm in their height and 65 kg in their weight were more effective in proper depth of chest compression and average chest compression depth.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.3
• /
• pp.527-534
• /
• 2006

This is a pilot study to survey the general demand of senior-assistive necessities before a standardization system for senior-assistive necessities is developed as well as to describe health professionals' opinions about the demand and quality of Oriental medical aids and necessities for daily living for the elderly. This is a descriptive survey in which 29 health professionals are questioned, using structured questionnaires based on ISO 9999. The questionnaires were developed by 7 expert conduction standardization system of senior-assistive products in Korea. The data is analyzed by descriptive statistics. The result is as follows : First, with regard to the demand for all of the items in Oriental medical aids for the elderly, the demand of cupping glasses is the highest, followed by instrument used to apply heat treatment, massage equipment, thermo-therapeutic mattress, and heat or ice packs. With regard to the demand for all of the items for the necessities for daily living for the elderly, chairs are the highest, followed by rolling chairs, beds for health, and heigh adjustable beds. Second, with regard to quality of Oriental medical aids, ${\ulcorner}$aids for hair care${\lrcorner}$ are the best, whereas ${\ulcorner}$aids for boiling Oriental medicine${\lrcorner}$ are the worst. In quality of the necessities for daily living, ${\ulcorner}$chairs${\lrcorner}$ are the best, whereas ${\ulcorner}$beds${\lrcorner}$ are the worst. Above all, this result shows that with ${\ulcorner}$aids for heat or cold treatment${\lrcorner}$, there is relatively high demand and low quaily of Oriental medical aids, and with ${\ulcorner}$Beds${\lrcorner}$, there is relatively high demand and low quality. Therefore, aids for heat or cold treatment and beds in th necessities for daily living are required to be developed for standardization of senior-assistive necessities.