• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.263-268
• /
• 2009

This study was conducted to determine application possibility of mulberry (Morus alba) silage as a functional feed in feeding management of Korean native cattle for high quality beef production by analysing active components and antioxidative activity. The chemical analysis of mulberry silage indicates that the content of dry matter, crude protein, ether extract, crude fiber and crude ash was $28.41{\pm}3.12%,\;12.43{\pm}0.28%,\;2.47{\pm}0.18%,\;20.29{\pm}0.75%\;and\;6.98{\pm}0.12%$, respectively. The content of 1-deoxynojirimycin (1-DNJ), which is representative active ingredient of mulberry and blood sugar descending component, was 0.568 mg/g and the content of $\gamma$-Aminobutyric acid (GABA), which is blood pressure descending component, was 5,936.22 pmol. Mulberry silage used in this study did not contain flavonoids but did contain total phenols for 21.69 ${\mu}g/mg$. 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity was increased with increasing the concentration of mulberry silage extracts and there was above 50% of scavenging activity at the concentration of 0.25 mg/ml. Hydroxyl radical scavenging activity was also increased with increasing the concentration of silage extracts. Alkyl radical scavenging activity was high at the low concentration of silage extracts, which was above 50% of scavenging activity at the concentration of 0.125 mg/ml. The result of this study indicated that there was high possibility of mulberry silage as a functional feed for beef cattle.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.211-216
• /
• 2009

Approximately 43 million tons of livestock manure (LM) are produced each year on Korean farms. LM can be utilized as a valuable resource and/or it can contaminate water by runoff and leaching through the soil, when LM has been thoughtlessly applied to the land and directly discharged into the water. This experiment was carried out to investigate the effect of no-till system and LM application on dry matter (DM) yield of silage corn and $NO_3$-N concentration in leaching water of lysimeter installed in the experimental field. The treatments were replicated three times in split plot design. Main plots consisted of tillage systems, such as conventional tillage (CT) and no-tillage (NT). Sub plots consisted of the type of LM, such as chemical fertilizer (CF), composted cattle manure (CCM) and composted swine manure (CSM). The control plots were fertilized as commercial chemical fertilizer. DM yields of corn increased significantly in order to CF > CCM > CSM (p<0.05). DM yield of corn in CT increased as comparing with that of corn in NT. Plant height, ear height and stem diameter also increased in order to CF > CCM > CSM. In addition, the root weight in CT was increased as comparing with that of corn in NT. However, there was no interaction effects of between type of LM and tillage system. $NO_3$-N concentration in leaching water of LM application was less than 10 ppm, but $NO_3$-N concentration in CF exceeded 10 ppm which is safety level of drinking water during summer time (rainfall season).

• Journal of Sericultural and Entomological Science
• /
• v.9
• /
• pp.27-34
• /
• 1969

This study was conducted investigate the effect of Gibberellin and Urea on the growth of mulberry tree with the compound treatment, and the characteristic of silkworm when the mulberry leaves simply treated with GB and the compound treatment with GB and Urea were supplied. The results are as follows. 1. Mulberry tree A. The leaf weight per mulberry tree with the compound treatment of GB+ Urea was heavier in spring silkworm and the leaf yield was increased by 7% compared with the non-treatment plot. B. The growth of wattle, leaf length and leaf width was more accelerated in the compound treatment plot of GB+Urea, the single treatment plot of GB and Urea than th!: non-treatment plot in autumn silkworm, and there was observed an incredse yielding effect of 16% in GB+Urea plot, in 16% GB plot and 18% in Urea plot respectively as compared with th: non-treatment plot, hut yield per l000m unit of wattle length was the least in GB plot. C. In the composition of mulberry leaves of treatment, water and crude protein was increased in the compound treatment plot of GB + Urea and the single treatment plot of GB and Urea than the non-treatment plot, but dry matter and carbohydrate were decredsed. 2. Characteristics of Larva in spring silkworm A. The mortality ratio of 4 and 5 instar plot was equally high in the compound treatment plot of GB+ Urea and the pupation ratio of 4 instar plot was lower than other treatment plot. B. Although there was no significant difference observed in the cocoon weight of 10.000 1st-day worms in both 4 and 5 instar plots between each treatment plot, the single treatment plot of GB showed somewhat great than other treatment plots. C. There was no significant difference observed in the cocoon layer ratio between each treatment plot, but 4 instar plots was slightly higher than 5 instar plots. 3. Characteristics of Larva in Autumn silkworm A. The mortality ratio of the compound treatment plot of GB+ Urea and GB was higher than that of the nontreatment and single treatment plot of Urea. B. The pupation ratio of the single treatment plot of Urea was higher than that of the compound treatment plot of GB + Urea, and there was no significant difference observed between other treatment plot. C. The cocoon weight of 10.000 1st-day th instar worms was heavier in the single treatment plot of Urea than nontreatment plot, GB+Urea plot and GB plot. D. The cocoon layer ratio was no significant difference observed between each-treatment.

• Journal of Life Science
• /
• v.17 no.9 s.89
• /
• pp.1284-1289
• /
• 2007

The Biological Activated Carbon (BAC) process in the water treatments represents a kind of biofiltration process which capabilities of bacteria to remove organic matters are maximized. It enables to eliminate organic matters and effectively reduce microbial regrowth potentials. As attached bacteria employ natural organic matter as a substrate, they are significantly dependent on indigenous microorganisms. In this study, characteristics of bacterial community by culturable and unculturable Methods have been conducted in a pilot plant using SAC in water treatment process at the downstream of the Nakdong River. Based on the results, HPC and bacterial- production for coal-based activated carbon material were $1.20{\sim}56.2{\times}l0^7$ cfu/g and $1.2{\sim}3.7\;mgC/m^{3}h$, respectively, in the SAC process. The highest level of attached bacteria biomass and organic carbon removal efficiency was found in the coal-based activated carbon. The genera Pseudomonas, Flavobacterium, Alcaligenes, Acilzetobacter, and Spingomonas were identified for each activated carbon material. Pseudomonas vesicularis was the dominant species in the coconut- and coal-based materials, where as Pseudomonas cepacia was the dominant species in the wood-based material. The Scanning Electron Microscope (SEM) observation of the activated carbon surface also found the widespread distribution of rod form and coccus. The community of attached bacteria was investigated by performing Fluorescent in situ hybridization (FISH) analysis. a group was dominant in coal, wood and coccunt-based materials, ${\alpha},\;{\beta}\;and\;{\gamma}$ group ranged from 27.0 ${\sim}$ 43.0%, 7.1 ${\sim}$ 22.0%, 11.3 ${\sim}$ 28.6%, respectively. These results suggest that a group bacterial community appears to be regulated removal efficiency of organic material in water treatment process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.3
• /
• pp.221-227
• /
• 1989

This study was conducted to understand the influence of soil compaction on root growth and nutrient uptake characteristics of the soybean roots grown in two soils with different texture. Tap root elongation was measured on young seedling grown in cores compacted to different bulk densities of 1.2, 1.4 and $1.6/cm^3$ with different soil water retention in laboratory. The soil used were Samgag sandy loam and Baegsan loam soils. The wet and dry weight, total length, average radius and total surface area of roots were measured on soybean plants grown in 1/5000 a Wagner pots compacted to different bulk density of 1.2 and $1.4g/cm^3$. The nutrient uptake of soybean shoot was measured and evaluated with the unit surface area of roots at the 7th, 17th and 27th days after germination. The results were as follows: 1. The tap root elongation rate was faster in the loam soil with low bulk density than in the sandy loam soil with high bulk density. The elongation rates were remarkedly decreased when soil water was lower than the retention of 4 bars in loam soil and that of 1 bars in sandy loam soil. 2. Tap root elongation rate sharply decreased as increased soil strength higher than $2kgf/cm^2$ measured by ELE penetrometer showing curvillinear regression. However, it was low regardless of soil strength when soil water retention was 10 bars in sandy loam soil. 3. From the pot experiment, the total length of roots were longer in loam soil than in sandy loam soil and was longer in the soils with lower bulk density. The average radius of fine roots grown in sandy loam soil was larger than that grown in loam soil. The total surface area of roots was greater in the loam soil with low bulk density than in the sandy loam soil with high bulk density as the total length of roots. 4. The amounts of nutrient uptake by soybean shoots were greater in loam soil primarily due to more production of dry matter than in sandy loam soil. The nitrogen influx rates through the unit surface area were 597 to $753nmoles/day-cm^2$ in loam soil and 222 to $365nmoles/day\;cm^2$ in sandy loam soilshowing higher value in higher bulk density. The potasium influx rates were 99 to $175nmoles/day-cm^2$, and those of phosphate were 26 to $46nmoles/day\;cm^2$. Those of Ca and Mg were 175 to 246 and 163 to $205nmoles/day\;cm^2$. The difference in nutrient influx rates between bulk densities of these elements were lower than that of nitrogen.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.361-371
• /
• 1992

For the increase of grain yield potential in rice, a low-tillering large panicled type has been suggested as an ideotype. A low-tillering plant type may have different yield potential and needs different cultural practices from that used in a high-tillering type for the maximum yield. This study was conducted to evaluate the grain yield performances of a low-tillering large panicled rice and high-tillering small panicled rice at different plant spacings, nitrogen(N) levels and seedling numbers per hill. A low-tillering large panicled genotype, IR25588 was compared with a high-tillering small panicled IR58. The grain yield of IR25588 was significantly higher than that of IR58 under a narrow spacing with high N level. The maximum yields of IR58 and IR25588 were reached at about 35,000 and 40,000 spikelets per m$^2$, respectively. The increased grain yield in IR25588 was mainly due to the increase in spikelet number per unit area which is the most precise indicator of grain yield in rice. The optimum spacing for the maximum yield was denser for IR25588 than that for IR58 under high N level. The intra-hill competition of the low-tillering type was lower than that of the high-tillering type. The higher dry matter production and bigger leaf area and culm weight were the main factors for increased grain yield in a low-tillering panicle weight type. Based on the results, the yield potential of a low-tillering panicle weight type was higher than that of a high-tillering panicle number type, especially under a close spacing with high N level.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.382-386
• /
• 2011

Microbial fuel cells (MFC), devices that use bacteria as a catalyst to generate electricity, can utilize a variety of organic wastes as electron donors. The current generated may differ depending on the organic matter concentrations used, when other conditions, such as oxidant supply, proton transfer, internal resistance and so on, are not limiting factors. In these studies, a single-cathode type MFC (SCMFC) and dual-cathode type MFC (DCMFC) were used to ascertain the current's improvement through an increase in the contact area between the anode and the cathode compartments, because the cathode reaction is one of the most serious limiting factors in an MFC. Also an MFC was conducted to explore whether an improvement in electricity generation resulted from oxidizing the carbon sources and nitrates. About 250 mg $L^{-1}$ sodium acetate was fed to an anode compartment with a flow rate of 0.326 mL $min^{-1}$ by continuous mode. The current generated from the DCMFC was higher than the value produced from MFC with a single cathode. COD removal of dual-cathode MFC was also higher than that of single-cathode MFC. The nitrate didn't affect current generation at 2 mM, but when 4 and 8 mM nitrate was supplied, the current in the single-cathode and dual-cathode MFC was decreased by 98% from $5.97{\pm}0.13$ to $0.23{\pm}0.03$ mA and $8.40{\pm}0.23$ to $0.20{\pm}0.01$ mA, respectively. These results demonstrate that increasing of contact area of the anode and cathode can raise current generation by an improvement in the cathode reaction.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.1
• /
• pp.37-42
• /
• 2003

This study was conducted at a volcanic ash soil in the Experimental Farm of Cheju national university from May 1, 2000 to August 25, 2000 to determine the optimum frequency of split N application for. forage production of Jeju Italian millet(Setaria italica Beauvis). N .rate was applied with 200kg N/ha, and frequencies of the split application were 1. 2, 3, 4 and f times. Days to heading was 87 days in the N applied plot all at once, was delayed to 93 days at the five times split-applied plot. Plant height was the greatest (143cm) at the four times split-applied plot, but above o. below that was short. Leaf length, number of leaves and nodes were a similar tendency to plant height. SPAD(Soil Plant Analysis Development) reading values rose 34.3∼36.2 as N was split-applied from one to five times. Fresh forage, dry matter, crude Protein and TDN yield at the H split-applied to four times increased 33.08∼5l.50MT/ha, 9.94∼13.36MT/ha, 0.93∼1.70MT/ha and 5.06∼7.28MT/ha, respectively, but at the five tines split-applied plot decreased to 49.33MT/ha, 12.69MT/ha, 1.65MT/ha and 6.98 MT/ha, respectively. As the increasing of N split-applied. crude protein, crude fat NFE and TDN content increased 9.4∼13.0％, 1.5∼l.9％, 44.5∼45.5% and 50.9∼55.0％, respectively, whereas crude fiber and crude ash content decreased 35.3∼31.6% and 9.3∼8.3, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.3
• /
• pp.71-81
• /
• 2009

Food waste has been actively used as a composting material in order to reduce the environmental pollution load and to enhance the recycling of resources. In this study, the longterm effects of continuous application of food waste compost to soils on both the crop production and the soil properties were examined to ensure the safety of food waste compost in agricultural use. In addition, we collected the preliminary data for establishing standard application rate of food waste compost for agricultural utilization. Based on conventional nitrogen application rate of chemical fertilizer for crop cultivation, pig manure compost $(24g\;N\;kg^{-1}$, $8g\;P_2O_5\;kg^{-1}$, and $10.4g\;K_2O\;kg^{-1})$ and food waste compost ($20g\;N\;kg^{-1}$, $20.1g\;P_2O_5\;kg^{-1}$, and $6.5g\;K_2O\;kg^{-1}$) were applied to the upland soil in $2{\times}2{\times}2m$ lysimeter in which lettuce (Lactuca sativa var. crispa), Chinese cabbage (Brassica campestris subsp. napus var. pekinensis), red pepper (Capsicum annuum), and potato (Solanum tuberosum) were grown continuously. The crops grown in soils to which food waste compost applied showed better growth responses than the control, whereas some variations were observed in the crops grown in chemical fertilizer treated soils. Continuous application of food waste compost increased the contents of organic matter, nitrogen, and phosphorus, which resulted in improving soil aeration.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.4
• /
• pp.362-371
• /
• 2016

The distribution patterns of Chromophoric Dissolved Organic Matter (CDOM) and the chemical characteristics of CDOM in the Seomjin river estuary were investigated in March, June and July 2012 in order to determine the spatial and temporal variability of CDOM along the salinity gradient considering the effects of mixing, nutrients and Chl a. The average CDOM values were $1.0{\pm}0.3m^{-1}$, $1.3{\pm}0.4m^{-1}$, and $1.4{\pm}0.3m^{-1}$ in March, June and July, respectively. A high concentration of CDOM (greater than $1.5m^{-1}$) was found at the head of the river which decreased towards the river mouth to as low as less than $0.5m^{-1}$. The average concentrations of CDOM increased from the dry season (March and June) to the wet season (July), and the average slope values ($S_{300-500}$), which were used as indicators of CDOM characteristics and sources, were in the range of $0.013-0.018m^{-1}$. The CDOM and $S_{300-50}$ values showed that not only the concentration of CDOM but also the chemical properties of DOM clearly changed between upstream and downstream in the Seomjin river. CDOM and FDOM showed a negative correlation with salinity ($R^2$ > 0.8), and CDOM was positively correlated with FDOM. Furthermore, the mixing pattern of CDOM was confirmed as conservative for all seasons. The main environmental factors influencing the concentration of CDOM was confirmed as conservative for all seasons. The main environmental factors influencing the concentration of CDOM were salinity (mixing) and water temperature, which meant the dilution of low CDOM seawater, was the controlling factor for the spatial distribution of CDOM. Increases in water temperature seemed to induce the production of CDOM during summer (June and July) through the biological degradation of DOM either by microbial activity or photo-degradation.