• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.4
• /
• pp.419-428
• /
• 2012

This study was carried out to analyze winter cereal crops for harvest time, proper drying time and haylage quality in order to investigate the possibility of the production of good quality haylage substitute for hay. As a result, in case of productivity and feed value, dry matter yield and TDN yield was increased with late harvest and crude protein and NDF, ADF was decreased (p<0.05). To make haylage for whole crop barley, oats, triticale, whole crop wheat need more than 32 hour wilting time in the milk ripe stage, yellow ripe stage need about 8~24 hour, and wilting time did not need the full ripe stage. Rye does not suitable for making haylage because of difficulty pre-wilting time. In case of fermentative quality on haylage, pH was increased with late harvest on all winter cereal crop forage. Lactic acid content was decreased with late harvest (p<0.05), and highest in the milk ripe stage. Acetic acid was also decreased with late harvest, and butyric acid was not detected. In conclusion, to harvest sooner of winter cereal crops could be an efficient way when making haylage in terms of protein content and fermentation quality. Ray can used as fresh and silage, because difficulty for pre-wilting time in Korea. Whole crop barley, oats, triticale, wheat can be used haylage when harvested yellow ripen stage and pre-wilting time for 8~24 hours.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.4
• /
• pp.397-404
• /
• 2012

This study was carried out to investigate the effects of stocking density on eating and ruminating behavior of Hanwoo steers (Bos taurus coreanae) in the finishing period. A total of 30 finishing Hanwoo steers ($631.3{\pm}11.4$ kg, 25 months old) were allocated to one of four stocking density groups comprising 1, 2, 3, and 4 steers per 32 $m^2$ pen [G1 (32 $m^2$), G2 (16 $m^2$), G3 (10.7 $m^2$) and G4 (8 $m^2$), respectively] in triplicate. Eating, rumination behaviors, as well as dry matter intake of steers were measured, and the results were subjected to analysis of variance with stocking density as the main effect. The results of eating behaviors over 48 hours are summarized as follows: Total intake was significantly (p<0.01) higher in G1, G2, and G3 compared to G4. Eating time was not different among the treatments, whereas ruminating time increased in the order of G1 > G2 > G3 > G4 (p<0.01). However, resting time and chewing time (sum of eating and ruminating) were not significantly different among the treatments. Number of boluses and number of total chews were highest in G1 (p<0.01), whereas number of chews per bolus was highest in G3 (p<0.01). Ruminating time per bolus as well as number of boluses per minute was not significantly different among the treatments. Number of defecations was higher in G1 and G2 animals compared to G3 and G4 animals (p<0.01). However, stocking density had no effect on drinking or urination. In conclusion, increasing stocking density (i.e. G4) per pen decreased voluntary intake, ruminating time, and total chewing number in the finishing period of Hanwoo steers. However, care must be taken in discussing stocking density in the present study as the space allowance per animal was satisfactory to meet the current animal welfare regulation in Korea and in Europe, although the beef production system in Korea is more intensive than in Europe.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.2
• /
• pp.117-122
• /
• 2013

This experiment was conducted to evaluate agronomic characteristics, forage quality, and dry matter (DM) yield of hairy vetch 'Cold green', common vetch 'Maxivesa', 'Wild common', 'Rasina', 'Morava', and 'Blanchefleur', at Seongju in Kyeongbuk from 2010 to 2012. The experiment was arranged in randomized complete block design with three replications. Vetchs were seeded on the 10th of Oct. 2010 and on the 3rd of Oct. 2011. Vetch plants were harvested on the 4th of May 2011 and on the 10th of May in 2012. 'Cold green' and 'Wild common' exhibited greater cold tolerance than other cultivars. Fifty percent-flowering of 'Cold green' occurred on the 22nd of Apr., whereas that of 'Wild common' occurred on the 26th of Apr. and those of 'Rasina' and 'Blanchefleur' occurred on 28th of Apr. and that of 'Maxivesa' occurred on 17th of May. The DM yield of 'Cold green' was higher (p<0.05) than all other cultivars, whereas the DM yield of 'Wild common' was higher (p<0.05) than those of the remaining 4 cultivars. According to the results obtained from this study, it is suggested 'Wild common' vetch is be recommendable for cultivation where increased DM production is sought.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.1
• /
• pp.80-91
• /
• 2017

The objective of this study was to select a model showing high-levels of interpretability which is high in R-squared value in terms of predicting the yield in the mixed pasture using the factors of fertilization, seeding rate and years after pasture establishment in steps, as well as the climate as a basic factor. The processes of constructing the yield prediction model for the mixed pasture were performed in the sequence of data collection (forage and climatic data), preparation, analysis, and model construction. Through this process, six models were constructed after considering climatic variables, fertilization management, seeding rates, and periods after pasture establishment years in steps, thereafter the optimum model was selected through considering the coincidence of the models to the forage production theories. As a result, Model VI (R squared = 53.8%) including climatic variables, fertilization amount, seeding rates, and periods after pasture establishment was considered as the optimum yield prediction model for mixed pastures in South Korea. The interpretability of independent variables in the model were decreased in the sequence of climatic variables(24.5%), fertilization amount(17.8%), seeding rates(10.7%), and periods after pasture establishment(0.8%). However, it is necessary to investigate the reasons of positive correlation between dry matter yield and days of summer depression (DSD) by considering cultivated locations and using other cumulative temperature related variables instead of DSD. Meanwhile the another research about the optimum levels of fertilization amounts and seeding rates is required using the quadratic term due to the certain value-centered distribution of these two variables.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.141-148
• /
• 1992

Field experiment was carried out to investigate the effect of plant growth regulator (PGR); IAA, GA, Kinetin to regrowth of sorghum and pearlmillet according to variety and plant growth stage. Kinetin application after cut increased tiller number and decreased dry weight of regrowth, but its application on sorghum stubble in water stress increased tiller number and leaf elongation rate, consequently increased regrowth dry weight. GA application reduced tiller production in both species, but tiller formation in pearlmillet was decreased more than in sorghum by promoting leaf elongation of old tiller. Nonstructural carbohydrate (NSC) of stubble during regrowth was consumed less at anthesis than at stem elongation stage because of senescence of tiller primordia. GA treatment reduced NSC content more than other PGR in both plant species, by consuming reserve NSC and stimulating rapid elongation of old tiller after cut. Dry matter increase during regrowth had high correlation with tiller number and tiller elongation a week after cut, while it did not have any correlation with NSC at cutting stage or with consumption of NSC during regrowth. Therefore, regrowth in sorghum and pearmillet must depend upon activity of tiller primordia more than upon amount of reserved NSC.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.562-568
• /
• 1995

Changes in rice yield and soil chemistry of dry seeded rice in double cropping of rice and barley were investigated at National Yeongnam Agricultural Experiment Station during 5 years (1990-1994). Barley straw added or removed dry seeding had safe rice seedling stand for good rice production. However, the coefficient of variation of seedling stand by year was higher than dry seeding in rice single crop. Rice seedling height was slightly reduced by barley straw incorporation. However, it recovered soon as rice growing progressed. Heading time delayed 4 days in flat seeding method but not in high-ridged seeding method which imply that. this is more safe seeding technology than flat seeding method. Comparing to rice single crop, barley straw added dry seeding increased rice yield by 2∼19%(Average of 5 years: 8%) from second year due to higher panicle and spikelet number. Contents of organic matter was 2.71% in 1990. In 1994, it decreased 2.61% for rice single crop, while increased 3.02% and 3.41% for barley straw removed or added field, respectively. Rice grain quality was not significantly different among cropping patterns.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.56-63
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe\ulcornerrature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Bio-Environment Control
• /
• v.3 no.1
• /
• pp.20-27
• /
• 1994

This study was conducted to improve marketing value and productivity of cucumber which was cultivated with primary scaffold stem type (Mannungcheongjang) and lateral stem type (Sayeup). The results are summarized as follows ; 1. Investigation of fruit setting characteristics to improve cucumber training type was resulted that the fruit-thinning was effective 3 nodes in Mannung- cheongjang and 4 nodes in Sayeup, because of defected yield potential and marketing value. 2. In the matter of early growing stage after training and cucumber quality at different treatment, cucumber weight at flowering curved cucumber and growth analysis of Mannungcheongjang were good in order of horizontal>vertical>slant training. And those of Sayeup were good in order of horizontal >slant> vertical training. 3. Aspect of light reception of cucumber plant in the level of plant height and accumulated leaf area index, vertical and horizontal training are better than slant in Mannungcheongjang, and there is order of horizontal >vertical >slant training in Sayeup. 4. Horizontal training in Mannungcheongjang was superior to any other case In view of cucumber number, productivity, and marketing rate. Therefore, this training was suggest ed of best method in cucumber cultivation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.4
• /
• pp.225-232
• /
• 2001

In order to identify the optimum seeding rate of Jeju barnyard grass (Echinochloa crusgalli var. fiurnentacea(Roxb) Wight), 15, 20, 25, 30, 35 and 40 kilograms per a hectare were planted in April 16, 2000, respectively. The growth characterization, the yield and chemical composition were then investigated in June 28(1st cutting) and August 30(2nd cutting), 2000. According to increasing the seeding rate, plant height(155.5 to 162 cm), the yield of fresh forage(61 to 73 MT/ha), dry matter forage(11.9 to 16.9 MT/ha), crude protein(0.9 to 1.6 MT/ha), and TDN(6.1 to 9.7 MT/ha) were gradually increased until the seeding furrow, 35 kg/ha. In 40 kg/ha of seeding furrow, however, those results were decreased than that of the former seeding furrow. The contents of crude protein(7.4 to 10.4%), ether extract(3.3 to 5.2%), nitrogen free extract(46.4 to 47.8%), and TDN(52.1 to 60.4%) were also similar to those of the plant heights and the each yield excepted the seeding furrow, 40 kg/ha. Namely, the each results about the contents increased in 40kg/ha of seeding furrow. According to increasing the seeding rate, the stem diameter, number of leaves, number of withering leaves, and fresh weight were gradually decreased. The contents of crude fiber(30.3 to 27.5%) and crude ash(12.7 to 9.0%) were also decreased These results showed that the optimum seeding rate for the best of the feed production was the seeding furrow, 35 kg/ha.