• Journal of Nutrition and Health
• /
• v.29 no.10
• /
• pp.1059-1071
• /
• 1996

This study was performed to investigate the effect of dietary protein level on renal senescence. Male rats of 337.8$\pm$5.7g body weight were underlateral nephrectomy or shamoperation. The rats were divided into high protein(40% casein), normal protein(15% casein) and low protein(8% casein)diets and fed experimental diets ad libitum for 24 weeks. The results are summarized as follows. There was a hypertophy of the remnant kidney of uninephrectomized rats of 40% or 15% protein group, coming up to the comparable weights of both kidneys of sham-operated rats. However, the hypertrophic effect was not seen in uninephrectomized rats of 8% protein group. Serum albumin was lower in uninephrectomized rats. With increasing dietary protein level blood urea nitrogen was increased, whereas, urinary urea nitrogen excretion was decreased. Urinary solute excretion was higher in uninephrectomized group than in sham-operated group. However, effect of dietary protein level on urinary solute excretion varied dpending on th solutes tested. GFR and urinary protein excretion, throughout experiment, increased with feeding period and with dietary protein level. Proteinuria was most severe in uninephrectomized rats fed 40% casein diet. Maximum urine concentration ability measured after dehydration was not different among the experimental groups. Light microscopic examination showed focal segmental glomerulosclerosis and mild increas of glomerular mesangial matrix in uninephrectomized rats fed 40% and 15% protein diet, however, which was not observed in uninephrectomized rats fed 8% protein diet and in sham-operated rats fed 40% diet. Immunofluorescence studies revealed segmental deposits of albumin in the mesangium and capillary loops in high protein and uninephrectomized groups. Minimal granular deposition of IgG was noted in the mesangium of all experimental groups. In conclusion, high protein intake accelerated deterioration of renal function and it was correlated with morphological change. Low protein intake was effective in preventing these changes.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.779-788
• /
• 2002

There are many technically difficult issues in searching multimedia data such as image, video and audio because they are massive and more complex than simple text-based data. As a method of searching multimedia data, a similarity retrieval has been studied to retrieve automatically basic features of multimedia data and to make a search among data with retrieved features because exact match is not adaptable to a matrix of features of multimedia. In this paper, data clustering and its indexing are proposed as a speedy similarity-retrieval method of multimedia data. This approach clusters similar images on adjacent disk cylinders and then builds Indexes to access the clusters. To minimize the search cost, the hashing is adapted to index cluster. In addition, to reduce I/O time, the proposed searching takes just one I/O to look up the location of the cluster containing similar object and one sequential file I/O to read in this cluster. The proposed schema solves the problem of multi-dimension by using clustering and its indexing and has higher search efficiency than the content-based image retrieval that uses only clustering or indexing structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4139-4145
• /
• 2012

This paper shows an antireflection coating design skill for utilization the thin-film silicon solar cell in the future. The reflectivity of each index profile previously suggested as linear, cubic and quintic function has been calculated and compared. Each index profile is applied to the antireflection coating consisting of 6 layers with 180nm thickness. Also we suggest the graded index profile and compare it's reflectivity to the linear, cubic and quintic's ones. As a results we find the reflectivity generally decreases as the order goes to higher. However the reflectivity in the graded index profile shows the higher(lower) value than ones in the linear, cubic and quintic especially in the shorter(longer) wavelength range from 500 nm to below 700 nm(above 700 nm to 800 nm). Therefore we find that the graded index profile structure could be applied for the better antireflection coating design scheme especially for optical device and optical filter in the range of from deep red to infrared.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.2
• /
• pp.95-102
• /
• 2013

Exfoliated graphite (EFG) with high aspect ratio was incorporated with high density polyethylene (HDPE) for use as high barrier packaging material such as water-sensitivity electric product and pharmaceutical packaging. Also HDPE/EFG nanocomposite films were prepared by adding the compatibilizer for effective dispersion and compatibility. Their chemical properties, crystal structure properties, thermal properties and water barrier properties of as-prepared HDPE/EFG nanocomposite films were investigated as a function of EFG contents. It showed that there is a weak interfacial interaction between HDPE and EFG, however, the water vapor permeations were decreased from 127 to 78 (70 ${\mu}m{\cdot}g/m^2$, $day{\cdot}atm$) by addition of EFG. Especially, the physical properties of HDPE/EFG nanocomposite films were effectively increased up to 0.5 wt%, however, there were no significant improvement of properties in nanocomposite films at the additional EFG loading. To maximize their performance of the nanocomposite films, further research is required to enhance the dispersion of EFG and compatibility of EFG in HDPE matrix.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4A
• /
• pp.287-293
• /
• 2011

This paper investigates the applicability of a piezoelectric cantilever for energy supply of wireless sensor node used in structural health monitoring of bridges. By combining the constitutive equation of piezoelectric material and the dynamic equation of cantilever structure, the coupled governing equation for cantilever equipped piezoelectric patches has been addressed in matrix form. Forced excitation tests were carried out to validate the numerical model and to investigate the power output characteristics of the energy harvester. From the numerical simulation based on the measured bridge accelerations under KTX, Saemaul, Mugunghwa trains, the peak powers generated from the device were found to be 28.5 mW, 0.65 mW, 0.51 mW respectively. It is revealed from the results that bridge vibrations caused by moving loads is not a practical source for energy harvesting because of its low acceleration level, low frequency and short duration.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.3
• /
• pp.121-124
• /
• 2013

The incorporation of 90 nm alumina particles into an epoxy matrix to form a composite microstructure is described in present study. It is shown that the use of ultrafine particles results in a substantial change in the behavior of the composite, which can be traced to the mitigation of internal charges when a comparison is made with conventional $Al_2O_3$ fillers. A variety of diagnostic techniques have been used to augment pulsed electro-acoustic space charge measurement to provide a basis for understanding the underlying physics of the phenomenon. It would appear that, when the size of the inclusions becomes small enough, they act cooperatively with the host structure and cease to exhibit interfacial properties. It is postulated that the $Al_2O_3$ particles are surrounded by high charge concentrations. Since $Al_2O_3$ particles have very high specific areas, these regions allow limited charge percolation through $Al_2O_3$ filled dielectrics. The practical consequences of this have also been explored in terms of the electric strength exhibited. It would appear that there was a window in which real advantages accumulated from the nano-formulated material. An optimum filler loading of about 0.5 wt.% was indicated.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.39-46
• /
• 2020

This paper is considered about centerline segregation of API 5L steel used in pipeline. Mn/S, Nb and C were known as segregated elements in the centerline of pipe thickness. The Mn usually was accompanied by S consisting of long viscous shape. Microstructure of the centerline was composed of MnS and Nb/Ti indusions including oxide. The segregation effect in centerline region was analyzed by OM, SEM/EDS and micro Vickers hardness. The Mn, Nb and C are retarded elements in transformation from austenite to ferrite or martensite. These elements could derive a bainitic microstructure as a kind of martensite, which is different from difference and element segregation between in matrix and centerline derived from steel melting and heat treatment.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.3
• /
• pp.409-419
• /
• 2008

A co-rotational quasi-conforming formulation of four- node stress resultant shell elements using Ivanov-Ilyushin yield criteria are presented for the nonlinear analysis of plate and shell structure. The formulation of the geometrical stiffness is defined by the full definition of the Green strain tensor and it is efficient for analyzing stability problems of moderately thick plates and shells as it incorporates the bending moment and transverse shear resultant force. As a result of the explicit integration of the tangent stiffness matrix, this formulation is computationally very efficient in incremental nonlinear analysis. This formulation also integrates the elasto-plastic material behaviour using Ivanov Ilyushin yield condition with isotropic strain hardening and its asocia ted flow rules. The Ivanov Ilyushin plasticity, which avoids multi-layer integration, is computationally efficient in large-scale modeling of elasto-plastic shell structures. The numerical examples herein illustrate a satisfactory concordance with test ed and published references.

• Journal of Korean Society of Transportation
• /
• v.6 no.2
• /
• pp.35-48
• /
• 1988

Amongst various analytic methods of internal structure of city, the factor analysis method which uses O-D matrix data has some merits and characteristics compared to other methods. 1) It is possible to find one certain interaction and flow pattern between traffic zones with in a city through reanalyzing O-D data which is too complex to grasp specific meaning or pattern of flow systems. 2) It can be easily visualized the traffic flow pattern by using adequate graphic techniques, and also can clarify the functional areas whose interaction linkages are significantly strong enough between each other. In this study, the taxi traffic O-D data between 42 traffic zones in Kwang-ju city was reanalyzied by varimax rotated factor analysis methods. As a result, four factors that have significant level factor loading (over 0.5 ) and factor score (over 1.0) were sorted out. so to speak four different functional areas were clarified in Kwang-ju city, of the West, the East, the south, and the North functional areas whose interaction linkages are significantly strong enough between each other. In the study, the taxi traffic O-D data between 42 traffic zones in Kwang-ju city was reanalyzied by varimax rotated factor analysis methods. As a result, four factors that have significant level factor loading (over 0.5) and factor score 9over 1.0) were sorted out. so to speak four different functional areas were clarified in Kwang-ju city, of the West, the East, the South, and the North functional area, then these four functional areas are almost coincided with citizen's general conception of community division and administrative district. Accordingly the factor analysis methods using traffic data seems to proved to be very accurate and useful analytic instruments for analyzing flow pattern and clarifying functional areas of city, and believed to provide basic informations and criteria for practical urban land use planning and transportation planning.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.8
• /
• pp.450-457
• /
• 2015

In this research a adsorbent, PVA-Zeolite bead, was prepared by immobilizing zeolite with PVA. The results of XRD and SEM analysis showed that the prepared PVA-Zeolite beads had porous structure and the zeolite particles were in mobilized within the internal matrix of the beads. The adsorption properties of Sr ion and Cs ion with the adsorbent were studied by different parameters such as effect of pH, adsorption rate, and adsorption isotherm. The adsorption of Sr ion and Cs ion reached equilibrium after 540 minutes. The adsorption kinetics of both ions by the PVA-Zeolite beads were fitted well by the pseudo-second-order model more than pseudo-first-order model. The equilibrium data fitted well with Langmuir isotherm model. The maximum adsorption capacities of Sr ion and Cs ion calculated from Langmuir isotherm model were 52.08 mg/g and 58.14 mg/g, respectively. The external mass transfer step was very fast compared to the intra-particle diffusion step in the adsorption process of Cs ion and Sr ion by the PVA-Zeolite beads. This result implied that the rate controlling step was the intra-particle diffusion step.