• Korean Journal of Materials Research
• /
• v.14 no.1
• /
• pp.13-18
• /
• 2004

Titanium alloys are the one of promising candidate materials for medium high temperature parts in the aircraft, automobile, petrochemistry and electrochemistry because of their high strength with low density in medium high temperature. In this study, the effects of aging and heat treatments on the mechanical properties of Ti-15-3 alloy in medium high temperature, which was $400^{\circ}C$, were studied. Solid solution treatment was performed at $8000^{\circ}C$ of $\beta$ phase region for 1 h and the alloy was quenched in water. The alloy was aged at $5000^{\circ}C$ of $\alpha$ and $\beta$ two-phase region for 1, 2, 4, 8, ... and 100 h to increase the mechanical property. The $\beta$ single phase was observed at all parts of specimens in Ti-15-3 alloy after ST. As the aging at $500^{\circ}C$, fine precipitates of a phase was generated from matrix of $\beta$ phase and the microstructure was consisted of weaving structure such as Widmanstiitten a phase. The most suitable aging time is 24h in$ 400^{\circ}C$. At this time, strength is 1164 MPa and elongation is about 12%. In room temperature, elongation of Ti-15-3 alloy aged at $500^{\circ}C$ for 16 h is poor (=3%) in spite of high tensile strength (1458 MPa).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.1
• /
• pp.1-10
• /
• 1997

Current seismic design philosophy for reinforced concrete (RC) structures on energy dissipation through large inelastic defomations. A nonlinear dynamic analysis which is used to represent this behavior is time consuming and expensive, particularly if the computations have to be repeated many times. Therefore, the selection of an efficient yet accurate alogorithm becomes important. The main objective of the present study is to propose a new technique herein called the prediction approach with siffness measure (PASM) method in the convetional direct integration methods, the triangular decomposition of matrix is required for solving equations of motion in every time step or every iteration. The PASM method uses a limited number of predetermined decomposed effective matrices obtained from stiffness states of the structure when it is deformed into the nonlinear range by statically applied cyclic loading. The method to be developed herein will reduce the overall numerical effort when compared to approaches which recompute the stiffness in each time step or iteration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.815-823
• /
• 1993

In this paper, the structure of modified multiplication-free adaptive filter(M-MADF) and convergence analysis are presented. To evaluate the performance of proposed M-MADF algorithm, fractionally spaced equalizer (FSE) is used. The input signals are quantized using DPCM and the reference signals is processed using a first-order linear prediction filter, and the outputs are processed by a conventional adaptive filter. The filter coefficients are updated using the Sign algorithm. Under the assumption that the primary and reference signals are zero mean, wide-sense stationary and Gaussian, theoretical results for the coefficient misalignment vector and its autocorrelation matrix of the filter are driven. The convergence properties of Sign. MADF and M-MADF algorithm for updating of the coefficients of a digital filter of the fractionally spaced equalizer (FSE) are investigated and compared with one another. The convergence properties are characterized by the steady state error and the convergence speed. It is shown that the convergence speed of M-MADF is almost same as Sign algorithm and is faster that MADF in the condition of same steady error. Especially it is very useful for high correlated signals.

• Journal of Environmental Science International
• /
• v.17 no.10
• /
• pp.1155-1167
• /
• 2008

Chlorophyll a (chl a) has been used as an indicator for phytoplankton biomass in pelagic ecosystems due to the relative ease of measurement and selectivity for autotrophs in mixed plankton assemblages. However, the use of chi a as an indicator for phytoplankton biomass is restricted due to its inability to resolve taxonomic differences of phytoplankton and the highly variable relationship of chi a with phytoplankton. Here, we describe the analysis of High-Performance Liquid Chromatography (HPLC) photosynthetic pigment data using CHEMTAX, which is a matrix factorization program that uses chemical taxonomic indices (phytoplankton carotenoids) to quantify the abundance of phytoplankton groups. Compared to direct microscopic counting that can distinguish species within broad groups, the resolution of taxonomic groups by CHEMTAX is generally coarse. It can only distinguish between diatoms, dinoflagellates, cryptophytes, cyanobacteria, chlorophytes, prasinophytes, and haptophytes. However, CHEMTAX analysis is much faster and less expensive than microscopic counting methods. HPLC pigment observations were taken in the spring, summer, fall, and winter in$ 2005\sim2006$ within Gamak Bay, South Korea. CHEMTAX results revealed that diatoms were the dominant taxonomic group in Gamak Bay. In inner Gamak Bay, the ratio between diatoms and cryptophytes was $75\sim80%$, and the ratio between dinoflagellates and cryptophytes was $10\sim15%$. In outer Gamak Bay, the ratio between diatoms and cryptophytes was $85\sim90%$, and the ratio between dinflagellates and cryptophytes was only $1\sim5%$. The population structure was seasonal. Relative diatom populations were less in the summer than the winter season.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.899-903
• /
• 2013

A self-bearing is an electric machine that achieves both rotational actuation and magnetic levitation using a single magnetic structure. To be able to stably levitate the rotor in a self-bearing, one needs to have an inverse of the force-current model. However, the force-current model in a self-bearing motor is typically not square. Furthermore, the elements of the matrix vary with respect to the rotational angle, resulting in singularities of the pseudo-inverse at various angles. In this paper, we propose a new force-current model that eliminates the singularities by adding a constraint in coil currents. This constraint eliminates the flux density in the stator core so that the saturation problem in the previous study is avoided. By implementing this force-current model, we are able to implement a levitation controller for a toroidally-wound self-bearing BLDC motor. The model inversion and levitation are validated experimentally.

• The Journal of Korean Medicine
• /
• v.35 no.3
• /
• pp.49-59
• /
• 2014

Background: Eight positions for new formulations in Jingyuequanshu is a unique classifying system and each position can be presented as a network. Network analysis is an effective method of visualizing the relationship of textual information. Purpose: This study aimed to analyze the structure of the eight positions for new formulations in Jingyuequanshu, and to acquire information about composing materia medica. Methods: We constructed an initial database and binary matrix of eight positions for new formulation in Jingyuequanshu, including its herbs and formulations. With this data, we carried out frequency and network analysis. Results: We analyzed each of the eight positions for new formulation, entire positions, and five positions after removing 'causal/cold/hot' positions. We found that the formulas of the causal position are distributed throughout the new formulation, and those of the cold and hot positions are also distributed similarly but the two groups are exclusive to each other. The other 5 positions are distributed exclusively to one another. Conclusions: Eight positions for new formulation of Jingyuequanshu were classified into three axes by exploratory network analysis. One is an axis of causal position, another is an axis of cold/hot positions, and the last is an axis of the other five positions.

• The Korean Journal of Applied Statistics
• /
• v.26 no.5
• /
• pp.697-712
• /
• 2013

When analyzing repeated binary data, the generalized estimating equations(GEE) approach produces consistent estimates for regression parameters even if an incorrect working correlation matrix is used. However, time-varying covariates experience larger changes in coefficients than time-invariant covariates across various working correlation structures for finite samples. In addition, the GEE approach may give biased estimates under missing at random(MAR). Weighted estimating equations and multiple imputation methods have been proposed to reduce biases in parameter estimates under MAR. This article studies if the two methods produce robust estimates across various working correlation structures for longitudinal binary data with time-varying covariates under different missing mechanisms. Through simulation, we observe that time-varying covariates have greater differences in parameter estimates across different working correlation structures than time-invariant covariates. The multiple imputation method produces more robust estimates under any working correlation structure and smaller biases compared to the other two methods.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.725-728
• /
• 2011

Infrared transmission images from GaAs semi insulating wafers were considered for years as directly related to the quantum absorption by electrons on fundamental states of deep centers, especially EL2. The satisfying correspondence of these images with the dislocations revealed by etching or X ray topography or infrared tomography led to the opinion that a strong concentration of EL2 centers was to be expected in the immediate vicinity of the dislocations. More recent work indicates that contrary to the expected behavior the photoqu$\acute{e}$nching of transmission images at T=80K does not appreciably change the image structure itself but more largely the uniform background level of absorption. Such investigations show that the transmission images of isolated dislocations (Indium doped materials) or cell structures of tangled dislocations (undoped materials) can be partly attributed to scattered light; similar operation at T=10K removes the dark features associated to EL2 but still preserves the skeleton of the pattern which is due to scattering. A result of the measurements is that dislocations must not be considered any longer as inexhaustive EL2 reservoirs. The lifetime of the photoqu$\acute{e}$nching mechanism is shown to vary differently for EL2 centers located close to the dislocations or in the matrix. In this paper we will develop the details of infrared image photoqu$\acute{e}$nching experiments in the vicinity of dislocations; undoped and In doped GaAs materials will be shown. These results will be discussed in the light of surface etching experiments.

• Korean Journal of Materials Research
• /
• v.22 no.2
• /
• pp.71-77
• /
• 2012

When a new bonding agent using coal ash is utilized as a substitute for cement, it has the advantages of offering a reduction in the generation of carbon dioxide and securing the initial mechanical strength such that the agent has attracted strong interest from recycling and eco-friendly construction industries. This study aims to establish the production conditions of new hardening materials using clean bottom ash and an alkali activation process to evaluate the characteristics of newly manufactured hardening materials. The alkali activator for the compression process uses a NaOH solution. This study concentrated on strength development according to the concentration of the NaOH solution, the curing temperature, and the curing time. The highest compressive strength of a compressed body appeared at 61.24MPa after curing at $60^{\circ}C$ for 28 days. This result indicates that a higher curing temperature is required to obtain a higher strength body. Also, the degree of geopolymerization was examined using a scanning electron microscope, revealing a micro-structure consisting of a glass-like matrix and crystalized grains. The microstructures generated from the activation reaction of sodium hydroxide were widely distributed in terms of the factors that exercise an effect on the compressive strength of the geopolymer hardening bodies. The Si/Al ratio of the geopolymer having the maximum strength was about 2.41.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.438-441
• /
• 2012

Abalone shell is a high strength and light weighted ceramic composite material, which is composed of $CaCO_3$ platelet and protein. Microstructure of abalone shell has a matrix structure that is similar to the bricks and mortar. The technology inspired from nature which consumes low energy at low temperature is called bioinspired technology. In this study, to make high strength and light weighted ceramic composite materials using bioinspired technology, porous green body was prepared with $Al_2O_3$ platelet. PMMA was infiltrated into the porous green body, then warm pressed to eliminate pores present in the composite. The microstructure of the composite was observed with FESEM, and the mechanical/thermal properties were measured.