• 제목/요약/키워드: Matrix Table Analysis

검색결과 62건 처리시간 0.02초

임업부문(林業部門)과 타산업부문간(他産業部門間)의 산업관련분석(産業關聯分析)에 관(關)한 연구(研究) (A Study on Interindustry Analysis between Forestry Sector and Other Industrial Sector)

  • 김종호;박태식
    • 한국산림과학회지
    • /
    • 제68권1호
    • /
    • pp.1-10
    • /
    • 1985
  • 본(本) 연구(硏究)는 국민경제(國民經濟)의 순환(循環)속에서 임업(林業) 및 임산가공산업(林産加工産業)의 위치(位置)와 구조(構造)를 파악하고자 1970년(年), 1975년(年), 1980년(年) 산업연관표(産業聯關表)를 자료(資料)로서 임업(林業) 및 임산가공산업(林産加工産業)을 중심(中心)으로 한 19 부문표(部門表)를 작성(作成)하고, 그것을 이용(利用)하여 투입계수(投入係數) 및 역행렬계수(逆行列係數)를 구함으로서 임업(林業) 및 임산가공산업(林産加工産業)과 타산업간(他産業間)의 연관구조변화(聯關構造變化)를 분석(分析)한 결과, 1970년(年)에서 1980년간(年間)에 경제구조(經濟構造)가 전환(轉換)됨에 따라 임업(林業)의 상대적(相對的) 비중(比重)은 감소(減少)하고 있으나, 구조적(構造的)으로는 중간수요적(中間需要的) 원시산업형(原始産業型)인 특성(特性)이 있으며 중간수요비(中間需要比)가 증가(增加)하고 있어 다른 산업(産業)에 대한 공급산업(供給産業)으로서 중요(重要)한 역할을 하고 있다. 특히 임산물(林産物)의 수입계수(輸入計數)는 타산업(他産業)에 비해 크고 증가추세(增加趨勢)에 있다.

  • PDF

데이터 마이닝을 이용한 시멘트 소성공정 질소산화물(NOx)배출 관리 방법에 관한 연구 (A Study on NOx Emission Control Methods in the Cement Firing Process Using Data Mining Techniques)

  • 박철홍;김용수
    • 품질경영학회지
    • /
    • 제46권3호
    • /
    • pp.739-752
    • /
    • 2018
  • Purpose: The purpose of this study was to investigate the relationship between kiln processing parameters and NOx emissions that occur in the sintering and calcination steps of the cement manufacturing process and to derive the main factors responsible for producing emissions outside emission limit criteria, as determined by category models and classification rules, using data mining techniques. The results from this study are expected to be useful as guidelines for NOx emission control standards. Methods: Data were collected from Precalciner Kiln No.3 used in one of the domestic cement plants in Korea. Thirty-four independent variables affecting NOx generation and dependent variables that exceeded or were below the NOx emiision limit (>1 and <0, respectively) were examined during kiln processing. These data were used to construct a detection model of NOx emission, in which emissions exceeded or were below the set limits. The model was validated using SPSS MODELER 18.0, artificial neural network, decision treee (C5.0), and logistic regression analysis data mining techniques. Results: The decision tree (C5.0) algorithm best represented NOx emission behavior and was used to identify 10 processing variables that resulted in NOx emissions outside limit criteria. Conclusion: The results of this study indicate that the decision tree (C5.0) can be applied for real-time monitoring and management of NOx emissions during the cement firing process to satisfy NOx emission control standards and to provide for a more eco-friendly cement product.

대규모 미시교통시뮬레이션모형 구축을 위한 O/D 추정 방법 성능 비교 - 중력모형과 QUEENSOD 방법을 중심으로 - (Comparison Study of O/D Estimation Methods for Building a Large-Sized Microscopic Traffic Simulation Network: Cases of Gravity Model and QUEEENSOD Method)

  • 윤정은;이철기;이환필;김경현;박원일;윤일수
    • 한국도로학회논문집
    • /
    • 제18권2호
    • /
    • pp.91-101
    • /
    • 2016
  • PURPOSES : The aim of this study was to compare the performance of the QUEENSOD method and the gravity model in estimating Origin-Destination (O/D) tables for a large-sized microscopic traffic simulation network. METHODS : In this study, an expressway network was simulated using the microscopic traffic simulation model, VISSIM. The gravity model and QUEENSOD method were used to estimate the O/D pairs between internal and between external zones. RESULTS: After obtaining estimations of the O/D table by using both the gravity model and the QUEENSOD method, the value of the root mean square error (RMSE) for O/D pairs between internal zones were compared. For the gravity model and the QUEENSOD method, the RMSE obtained were 386.0 and 241.2, respectively. The O/D tables estimated using both methods were then entered into the VISSIM networks and calibrated with measured travel time. The resulting estimated travel times were then compared. For the gravity model and the QUEENSOD method, the estimated travel times showed 1.16% and 0.45% deviation from the surveyed travel time, respectively. CONCLUSIONS : In building a large-sized microscopic traffic simulation network, an O/D matrix is essential in order to produce reliable analysis results. When link counts from diverse ITS facilities are available, the QUEENSOD method outperforms the gravity model.

HSI와 MaxEnt를 통한 삵의 서식지 예측 모델 비교 연구 (A Comparative Study on HSI and MaxEnt Habitat Prediction Models: About Prionailurus bengalensis)

  • 유다영;임태양;김휘문;송원경
    • 한국환경복원기술학회지
    • /
    • 제24권5호
    • /
    • pp.1-14
    • /
    • 2021
  • Excessive development and urbanization have destroyed animal, plant, habitats and reduced biodiversity. In order to preserve species diversity, habitat prediction studies are have been conducted at home and overseas using various modeling techniques. This study was conducted to suggest optimal habitat modeling research by comparing HSI and MaxEnt, which are widely used among habitat modeling techniques. The study was targeted on the endangered species of Prionailurus bengalensis in nearby areas (5460.35km2) including Cheonan City, and the same data were used for analysis to compare those models. According to the HSI analysis, Prionailurus bengalensis's habitat probability was 74.65% for less than 0.5 and 25.34% for more than 0.5 and the top 30% were forest (99.07%). MaxEnt's analysis showed that 56.22% of those below 0.5 and 43.79% of those above 0.5 were found to have a high explanatory power of 78.3% of AUC. The Paired Wilcoxn test, which evaluated the significance of thoes models, confirmed that the mean difference between the two models was statistically significant (p<0.05). Analysis of the differences in the results of those models using the matrix table shows that score 24.43% HSI and MaxEnt was accordance,12.44% of the 0.0 to 0.2 section, 7.22% of the 0.2 to 0.4 section, 2.73% of the 0.4 to 0.6 section, 1.96% of the 0.6 to 0.8, and 0.08% of the 0.9 to 1.0. To verify where the score difference appears, the result values of those models were reset to values from 1 to 5 and overlaid. Overlapping analysis resulted in 30.26% of the Strongly agree values, 56.77% of the agree values, and 11.92% of the Disagree values. The places where the difference in scores occurs were analyzed in the order of forest (45.23%), agricultural land (34.57%), and urbanization area (7.65%). This confirmed that the analysis of the same target species within the same target site also has differences in forecasts depending on the modelling method. Therefore, a novel analysis method combining the advantages of each modeling in habitat prediction studies should be developed, and future study may be used to select Prionailurus bengalensis and species-protected areas and species protection areas in the future. Further research is judged to require higher accuracy studies through the use of various modeling techniques and on-site verification.

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

불균형 자료 분석과 가설 검정에 관한 연구 (Study on the analysis of disproportionate data and hypothesis testing)

  • 장석환;송규문;김장한
    • 응용통계연구
    • /
    • 제5권2호
    • /
    • pp.243-254
    • /
    • 1992
  • 불균형 자료 분석에 대해서는 일찍이 Brown(1932)과 Yates(1934)의 연구 이에 Finney(1948), Stevens(1948), Henderson(1953), Kramer(1955)등 많은 사람들이 관심을 가지고 연구하였고 Searle(1971, 1977, 1981)은 R(v) 표기법으로 모형식의 상수적합에 의한 변동을 나타내었으며 Hocking과 Speed(1975), Speed와 Hocking (1976)이 사용한 제한들을 $\Sigma$ -, W-, O-restrictions라고 하였다. 또한 Speed등(1978)은 비가중평균법(method of unweighted means), 평균의 가중제곱법(method of weighted squares of means), 상수적합법 (method of fitting constants), Overall- Spiegel법, Henderson방법 등을 비교설명하고 Burdick 등(1974)은 각 변동을 기하학적으로 해석하려 하였다. 백(1987a,1987b)은 SAS 팩키지에 의한 변동을 설명하였고 장(1988)도 Searle(1977, 1981)의 방법을 이용하여 가설검정과 변동을 검토한바 있다. 본 연구에서는 여러 가지 모형에 대하여 $n_{ij} > 0, 또는 n_{ij} \geq 0$ 인 경우에 변동계산과 W-, $\Sigma$-, O- 제한 조건하에서의 변동과 가설을 재조명해 보고져 한다.

  • PDF

공간의존행렬과 신경망을 이용한 문서영상의 효과적인 블록분할과 유형분류 (An Efficient Block Segmentation and Classification Method for Document Image Analysis Using SGLDM and BP)

  • 김중수;이정환;최흥문
    • 한국정보처리학회논문지
    • /
    • 제2권6호
    • /
    • pp.937-946
    • /
    • 1995
  • 본 논문에서는 공간의존행렬과 신경망을 이용하여 문서영상에서 인식대상 문자가 포함되어 있는 블록들을 좀더 세분해 낼 수 있는 효과적인 방법을 제시 하였다. 제안 된 방법은 명암도 문서블록에서 공간의존행렬을 구하고 7가지 질감 특징을 추출한 뒤 신경망을 이용해 문서블록을 9가지 유형으로 분류할 수 있도록 하였다. 특히 기존에는 비문자영역으로 분류되던 수식, 도표, 순서도 등 주로 문자가 포함되어 있는 블록들을 세분해 낼 수 있도록 하였다. 또한 신경망 학습알고리즘인 BP 를 사용함으로써 기존의 선형분류시에 요구되던 유형별 임계값과 선형면결정지수를 찾는 어려움을 해소하였다. 명암도영상을 이진화하기 전에 먼저 Sobel연산을 적용함으로써 문서 뒷면에 의한 배경 잡음의 영향을 줄일 수 있도록 하였고, 교차 문지르기 후 분할함으로써 블록이 작은 조각으로 나누어지는 것을 방지하도록 하였다. 실험결과 제안한 방법에서는 문자가 포 함되어 있는 블록은 큰 문자, 중간문자, 작은 문자블록 및 수식, 순서도, 도표블록의 6가지로, 그리고 비문자블록은 인물사진, 그래프 등 3가지 유형으로 상세하게 분류 할수 堞있었으며 전체적인 분류성능도 우수함을 확인할 수 있었다.

  • PDF

중력모형을 이용한 서비스업의 지역간 교역계수 추정 (Estimating Interregional Trade Coefficient of Service Industry using the Gravity Model)

  • 윤갑식;김재구
    • 한국경제지리학회지
    • /
    • 제13권3호
    • /
    • pp.457-469
    • /
    • 2010
  • 본 연구의 목적은 중력모형을 이용하여 서비스업에 대한 지역간 교역계수를 추정하는 것이다. 중력모형을 이용하여 지역간 교역규모를 추정할 때 가장 중요한 점은 바로 종속변수인 지역간 교역자료와 독립변수인 지역간 인력요인 및 지역간 거리를 나타내는데 적용되는 대리변수의 선정이라고 할 수 있다. 따라서 본 연구에서는 중력모형을 이용하여 서비스업의 지역간 교역규모를 추정할 때 적용 가능한 다양한 대리변수에 따라 네 가지 유형의 모형을 제시하고 이중에서 통계적 설명력이 가장 높은 모형을 선정하고자 하였다. 분석결과, 종속변수로 지역산업연관표의 16개 지역간 서비스업 교역량 자료를 적용하고 독립변수로 이출지역의 서비스업 생산액 자료와 이입지역의 인구규모 그리고 지역간 공간거리를 적용한 모형의 설명력이 가장 높은 것으로 나타났다. 따라서 본 연구는 광역자치단체보다 작은 경제단위의 지역을 대상으로 지역산업연관표를 작성하거나 또는 최신의 지역산업연관표를 작성하기 위해 비조사적 방법을 적용하는데 있어 보다 정확한 지역간 교역자료 구축을 위한 방법을 제시하였다는데 의의가 있다고 할 수 있겠다.

  • PDF

실전 창의형 인재 양성을 위한 NCS 기반 직업교육과정의 모형 개발 (Development of NCS Based Vocational Curriculum Model for the Practical and Creative Human Respirces)

  • 김동연;김진수
    • 대한공업교육학회지
    • /
    • 제39권2호
    • /
    • pp.101-121
    • /
    • 2014
  • 이 연구는 고교 단계에서의 실전 창의형 인재 양성을 위한 NCS 기반 직업교육과 정의 모형을 개발하는 것이 목적이다. 이 연구를 효과적으로 수행하기 위해 사용한 연구 방법은 국내 외 문헌 연구, 내용 분석 연구, 사례 연구, 전문가(9명) 협의회 및 검토 자문 위원(3명)의 심층 면담 조사 방법으로 수행하였다. 또한 구안한 모형(안)의 타당도 확보를 위해 평균, 표준 편차, 내용 타당도 비율(CVR)로 분석하였다. 이 연구의 주요 개발 결과는 다음과 같다. 첫째, NCS 개발 매뉴얼과 훈련기준 활용 훈련과정 편성 매뉴얼, NCS 학습모듈 개발 매뉴얼과 사례집, NCS 연구보고서, NCS 기반 고교 단계 직업교육과정의 시범 개발 자료집과 사례 연구 분석, 국내 외 직업교육 모형 등 NCS 관련 선행 및 문헌 연구를 토대로 실전 창의형 인재 양성을 위한 NCS 기반 직업교육과정의 기본 모형(안)을 개발하였고 둘째, 구안한 모형(안)의 단계별 영역별 해당 하위 구성 요소 도출 자료를 토대로 전문가 심층 면담 조사 내용과 의견을 반영하여 최종 19개를 도출하였다. 즉 1단계의 영역별 하위 구성 요소로 능력단위, 능력단위정의, 능력단위요소, 수행준거, 적용범위 및 작업상황, 평가지침, 직업기초능력이고 2단계의 영역별 하위 구성 요소는 교과목명, 교과목표, 대단원명, 대단원목표, 교수 학습 방법, 평가방법, 직업기초능력이며 3단계 영역별 해당 하위 구성 요소로 NCS 기반 교과목 행렬표, NCS 기반 교과목 프로파일, NCS 기반 직업교육과정 편제표, NCS 기반 교과목 전체 구성도, NCS 기반 직업교육과정의 운영계획서를 도출하였다. 셋째, 1단계와 2단계 각각의 해당 하위 구성 요소를 3단계의 NCS 기반 교과목 프로파일과 연계 구성하여 모형(안)을 개발하였다. 넷째, 모형(안)에 대해 단계별 영역별로 타당도를 검증한 결과 평균이 4.67이고 CVR 값은 1.00으로 타당도가 매우 우수함을 알 수 있었다. 또한 해당 하위 구성 요소 도출 내용에 대한 평균이 모두 4.33 이상이며 CVR 값은 1.00으로 타당도가 매우 높았고 모형(안)의 연계 구성에 대한 평균도 모두 4.33 이상이며 CVR 값도 1.00이었다. 그리고 표준 편차는 .50 이하로 편차가 모두 작은 것으로 나타났다. 다섯째, 전문가에 의한 타당성 검증 자료와 검토 자문 위원들의 심층 면담 조사 내용을 토대로 모형(안)을 수정 보완 단계를 거쳐 고교 단계에서의 실전 창의형 인재 양성을 위한 NCS 기반 직업교육과정의 모형을 개발하였다.

임목(林木)((해송(海松)) 적지선정(適地選定)에 관한 연구(硏究) (The Selection of the Suitable Site for Forest Tree(Pinus thunbergii))

  • 정영관;박남창;손영모
    • 한국산림과학회지
    • /
    • 제82권4호
    • /
    • pp.420-430
    • /
    • 1993
  • 우리나라 남부지방의 주요 수종(樹種)인 해송임분(海松林分)의 지위지수(地位指數)에 영향하리라 예상되는 토양(土壤)의 이화학적(理化學的) 성질(性質)과 환경인자(環境因子)중 18개 인자(因子)를 218개 표준지(標準地)에서 측정(測定)하여 설명변수로 하고, 해송(海松)의 수고생장량(樹高生長量), 즉 임분(林分)의 지위지수(地位指數)를 반응변수로 하여 상관분석, 편상관분석, 회귀분석 및 요인분석을 실시하여 해송(海松)의 적지선정(適地選定), 생장량(生長量) 추정 및 비배관리 등에 대한 기초적 지침을 제시하고자 이 연구(硏究)를 실시하였으며, 그 결과를 요약하면 다음과 같다. 1. 해송임분(海松林分)의 지위지수(地位指數)와 토양(土壤) 및 환경인자(環境因子)간의 상관에 있어서, 지위지수(地位指數)와 유효토심간의 상관계수 r=0.6498로 약간 높게 나타났고(p<0.01), 다음으로 경사도, 유기물함량, 전질소함량 순으로 상관이 나타났다. 2. 각종 인자간의 내부상관을 배제한 해송임분(海松林分)의 지위지수(地位指數)와 영향인자간의 편상관에 있어서는 유효토심(r=0.6270), 경사도(r=-0.5423), 염기포화도(r=0.3278) 순으로 해송임분(海松林分)의 지위지수(地位指數)에 영향을 미치고 있었다. 3. 단계적회귀분석 결과, 해송임분(海松林分)의 지위지수(地位指數)에 영향을 미치는 인자군(因子群)은 유효토심, 경사도, 유기물함량, 염기포화도, 토양산도, 미사함량 및 치환성 $Ca^{{+}{+}}$ 군(群)으로 나타났다. 4. 토양(土壤) 및 환경인자(環境因子)에 의한 해송임분(海松林分)의 지위지수(地位指數) 추정식은 $Y=13.2691+0.0242\;X_2-1.2244\;X_4+0.6142\;X_5-0.3472\;X_{11}+0.0355\;X_{13}+0.1552\;X_{15}-0.1002\;X_{17}$으로 도출되었고, 추정식에 대한 적합도는 77%로 나타났다. 5. 해송임분(海松林分)의 지위지수(地位指數)에 영향하는 인자들을 요인분석한 결과, eigenvalue 1.0 이상의 주성분은 6개였으며, 이들의 누적기여율(累積奇與率)은 71.1%였다. 6. 요인분석(要因分析)에 의하여 산출된 6개의 요인점수(要因點數)와 해송임분(海松林分)의 지위지수(地位指數)와의 관계를 단계적회귀분석한 결과, 5개의 요인점수(要因點數)를 갖는 추정모델이 도출되었다. 이 해송임분(海松林分)의 지위지수(地位指數) 추정모델에 대한 $R^2=0.8481$로 높은 설명력을 가지며, 회귀계수에 대한 유의성을 검정한 결과 1% 수준에서 유의성이 인정되었다. 따라서 해송(海松)의 수고생장(樹高生長)에 관여하는 인자(因子)를 선정하는 방법은 요인분석(要因分析)에 의한 회귀분석(回歸分析)이 가장 유리한 것으로 나타났다. 그리고 해송임분(海松林分)의 경영은 이상과 같은 방법에 의하여 선정된 임목생장(林木生長)에 관여하는 인자(因子)를 고려하여 실행되어야 할 것으로 사료된다.

  • PDF