• 제목/요약/키워드: Matrix Table Analysis

검색결과 62건 처리시간 0.023초

LE analysis on unsaturated slope stability with introduction of nonlinearity of soil strength

  • Deng, Dong-ping;Lu, Kuan;Li, Liang
    • Geomechanics and Engineering
    • /
    • 제19권2호
    • /
    • pp.179-191
    • /
    • 2019
  • Based on the effective stress principle, a new formula for shear strength of unsaturated soil is derived under the general nonlinear Mohr-Coulomb (M-C) strength criterion to improve the classical strength criterion of unsaturated soil. Meanwhile, the simple irrigation model under steady seepage is adopted to obtain the distribution of the matrix suction or the degree of saturation (DOS) above the groundwater table in the slope. Then, combined with the improved strength criterion of unsaturated soil and the simple irrigation model under steady seepage, the limit equilibrium (LE) solutions for the unsaturated slope stability are established according to the global LE conditions of the entire sliding body with assumption of the stresses on the slip surface. Compared to the classical strength criterion of unsaturated soil, not only the cohesion soil but also the internal friction angle is affected by the matric suction or the DOS in the improved strength criterion. Moreover, the internal friction angle related to the matric suction has the nonlinear characteristics, particularly for a small of the matric suction. Thereafter, the feasibility of the present method is verified by comparison and analysis on some slope examples. Furthermore, stability charts are also drawn to quickly analyze the unsaturated slope stability.

고정반복법에 의한 암시적 HHT 시간적분법을 이용한 철근콘크리트 골조구조물의 실시간 하이브리드실험 (Real-Time Hybrid Testing Using a Fixed Iteration Implicit HHT Time Integration Method for a Reinforced Concrete Frame)

  • 강대흥;김성일
    • 한국지진공학회논문집
    • /
    • 제15권5호
    • /
    • pp.11-24
    • /
    • 2011
  • 고정반복법에 의한 암시적 HHT 시간적분법을 이용하여 3층 3경간 철근콘크리트 골조구조물을 수치해석모형과 물리적 분구조모형으로 나누어 실시간 하이브리드실험을 실시하였다. 물리적 부분구조모형으로는 1층 내부 비연성기둥 1개소가 선택되었고, 수치해석모형에 일축 방향의 지진하중을 시편이 심한 손상에 의하여 파괴에 이를 때까지 작용시켰다. 비선형 유한요소해석 프로그램인 Mercury가 실시간 하이브리드실험을 위하여 새로이 개발 및 적용되었다. 실험결과는 물리적 부분구조모형의 상부 수평방향 층간변위비를 OpenSees에 의한 수치해석시뮬레이션과 진동대실험의 그것과 비교하였다. 본 실험은 가장 복잡한 실시간 하이브리드실험 중의 하나이고, 하드웨어, 알고리즘 그리고 모형에 대한 기술적인 내용을 본 논문에 자세히 설명하였다. 수치해석모형의 개선, 물리적 부분구조 모형 접선강성행렬의 유한요소해석 프로그램에서의 평가 그리고 하중기반 보-요소의 요소상태결정의 연산시간을 줄이기 위한 소프트웨어의 개선이 이루어진다면 실시간 하이브리드실험과 진동대실험결과의 비교는 권장할 만하다. 그리고 "지진과 같은 동적하중하의 복잡한 구조물의 수치해석시뮬레이션"이라는 목적을 위하여 실시간 하이브리드실험은 동적하중에 대한 실험적 검증을 점진적으로 수치해석모형으로 대체하기 위한 저비용-고효율 실험법으로서의 가치를 충분히 가지고 있다고 할 수 있다.

정보통신 기술지식의 파급효과에 대한 실증분석 (An Empirical Analysis on the Diffusion Impact of IT Technological Knowledge)

  • 조형곤;박광만;이영용;박용태;김문수
    • 기술혁신연구
    • /
    • 제8권1호
    • /
    • pp.73-94
    • /
    • 2000
  • The main objective of this research is to examine the spillover effects of technological knowledge from IT industry to other industrial sectors and, based on empirical findings, to draw policy implications and suggest policy directions. To this end, we divide IT industry into IT equipment and IT service, assuming that these two sub-sectors are considerably different each other in terms of technology knowledge flow. Other industries are classified into 17 different sectors based on the KSIC of 1990. As the proxy measure of technological knowledge, the notion of R&D stock is employed. The Input/output(I/O) Table is used to define the inter-industrial flow pattern and to draw the knowledge flow matrix. As the research methodology, cost function model is employed to gauge the spillover effects of technological knowledge of IT industry. Based on the results of analysis, it is found that the economic impact of technology diffusion also exhibits a different pattern between IT equipment and IT service. The diffusion of IT equipment tends to show labor-substitution effect whereas IT service displays labor-creation effect. This fact should be considered in devising industry, education, and labor policy. The expectations from this research are as follows. First, the sectoral pattern, difference between IT equipment and service in particular, identified from this research may shed light on the sector-specific policy direction. It is emphasized that a sector-specific approach, rather than an aggregate approach, is relevant for formulating IT policy. Second, it is expected that the importance of technology diffusion programs and policy measures are recognized among policy makers in IT industry.

  • PDF

Digital Transformations to Improve the Work and Distribution of the State Scholarships Programs

  • Kireyeva, Anel A.;Lakhonin, Vassiliy;Kalymbekova, Zhanna
    • 유통과학연구
    • /
    • 제17권3호
    • /
    • pp.41-47
    • /
    • 2019
  • Purpose - Based on the analysis of Kazakhstan's experience of digital transformation, this study suggests a concept for digital solution to optimize organizational process, create trust networking between the center of state scholarships programs and recipients. In addition, the authors contribute to the current discussions of an effective digital transformation of state services. Research design, data, and methodology - Policy analysis is based on the combination of both primary and secondary materials collected during a Policy Research Project conducted in Kazakhstan in 2017. It involved semi-structured interviews with the state scholarship' recipients, ICT experts and findings from academic articles. Results - Findings are represented via Policy Development Matrix - a table with three options (status quo, partial change, total change) to deal with policy challenges. Authors suggest a concept for digital solution following the Customer Relationship Management (CRM) principles for optimizing core business processes, communication and networking strategies of the state scholarships program. Conclusions - At the time when digitalization becomes trending for states, the transformation of the state education policy is inevitable. The rapid development of digital technologies creates new opportunities for a single integration platform with key principles of Smart Remote Management in the state scholarships programs.

사각 링 마이크로스트립 안테나 해석 (Analysis of Rectangular Ring Microstrip Antenna)

  • 서동국;박병우
    • 한국전자파학회논문지
    • /
    • 제15권1호
    • /
    • pp.60-67
    • /
    • 2004
  • 본 논문에서는 디세그멘테이션 기법을 이용하여 사각 링 패치 안테나를 해석하였으며, 그린함수로부터의 직사각형 세그먼트의 임피던스 계산과 평면 전자기 구조체에 대한 디세그멘테이션 방법이 논의되고 있다. 사각 링 캐버티는 큰 사각형 캐버티에서 작은 사각형 캐버티를 빼낸 구조이므로, 사각형 캐버티에 대한 그린함수의 항으로 표현된 각각의 임피던스 행렬들에 다 단자 결합법을 적용하여 사각 링 캐버티의 전체 임피던스 매트릭스를 구한다. 전자계는 8개 경계조건을 만족하는 벡터 포텐셜로부터 구할 수 있다. 각 에지에서의 전자계 분포는 여기된 모드에 따라 막대 그래프로 표현하였다. 이 결과를 이용하여 사각 링 패치 안테나의 동작모드를 분석할 수 있다.

공업계열 고등학교의 발전계획 수립을 위한 학교컨설팅 모델 및 사례 분석 (School Consulting Model to Establish the Development Plan of Industrial High School and a Case Analysis)

  • 김진수
    • 대한공업교육학회지
    • /
    • 제33권2호
    • /
    • pp.1-25
    • /
    • 2008
  • 이 연구에서는 공업계열 고등학교의 발전 계획 수립을 위한 학교 컨설팅의 이론을 탐색하고, 컨설팅 모델과 수행기법 모델을 제시한 후, 제시한 모델과 컨설팅 수행 기법에 의하여 수행된 C 공업고등학교의 컨설팅 사례에 대하여 분석하였다. 최근까지 수행된 학교컨설팅은 대부분이 수업 및 장학 컨설팅에 대한 것이며, 학교경영컨설팅 분야에 대한 연구는 아직 미미한 실정이다. 이 논문에서는 공업계열 고등학교에 적합한 학교 컨설팅 모델을 구안하여 착수, 진단, 실행기획, 실행, 종료의 5단계로 제시하였다. 컨설팅 모델을 적용한 C공업고등학교의 컨설팅 사례를 분석하였고, 이는 향후 공업계열 고등학교의 컨설팅 연구의 기초 자료를 제공하고자 함이다. 학교컨설팅 모델의 5단계에 의하여 C공업고등학교의 현황 분석, 설문 조사, SWOT 분석, Issue Tree, 학교 진단 평가 등을 하였다. C공업고등학교의 발전 전략을 수립하기 위하여 Issue Tree에 기초하여 '문제점 및 개선방안 표'를 작성한 후, Pay-Off Matrix를 작성하였다. 최종적으로 C공업고등학교가 단기 및 중장기적으로 해결해야 할 발전 계획을 도출할 수 있었다.

X線螢光分析에 依한 珪酸鹽鑛物의 分析 (The X-Ray Fluorescent Spectrographic Analysis of Silicate Minerals)

  • 김찬국;상기남;김황암
    • 대한화학회지
    • /
    • 제13권1호
    • /
    • pp.49-55
    • /
    • 1969
  • 螢光X線을 利用하여 珪酸鹽鑛物中의 主成分인 $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO, MgO 및 $K_2O$를 迅速히 分析할 目的으로 試料의 處理 測定 및 各條件에 對하여 檢討하였다. 試料를 Lithium Tetraborate로 용융하여 300Mesh 以上의 微粉末로 한後 40,000Lb의 壓力으로 成型하여 Tungsten과 Chromium 對陰極의 X-線管과 LiF, EDDT, ADP의 分光結晶을 使用하여 測定하였다. 各成分에 對한 檢量曲線은 Matrix Effect를 고려하여 N.B.S 및 International Rock Standard를 選定 使用하였고 Lanthanum Oxide 및 Binder로서 Borie Acid를 첨가하여 얻었다. 各成分에 對하여 本法의 再現性 및 誤差를 檢討하기를 爲하여 I.R.S T-1을 使用하여 測定한 結果 0.47($SiO_2$), 0.85($Al_2O_3$), 0.05($Fe_2O_3$), 0.07(caO), 0.02($K_2O$), 0.13(MgO)의 標準偏差를 얻었다. 또한 化學分析植에 對한 偏差를 求하고져 Clay, Kaoline, Alunite, Wallastonite 및 Zeolite 等의 珪酸鹽鑛物을 選定하여 化學分析 및 本法에 依한 分析結果를 비교하였다.

  • PDF

미토콘드리아 DNA의 제한효소 분석법에 의한 영지의 계통분류 (Phylogeny of Ganoderma Based on the Restriction Enzyme Analysis of Mitochondrial DNA)

  • 홍순규;정학성
    • 미생물학회지
    • /
    • 제32권4호
    • /
    • pp.245-251
    • /
    • 1994
  • 영지속(Ganoderma)에 속하는 7종 10균주에 대하여 미토콘드리아 DNA의 제한효소 분절양상 비교를 통한 계통분석을 수행하였다. 여러 가지 제한효소들 중 생산된 절편이 충분한 정보를 가지고 있으면서 서로 구별할 수 있는 6가지의 제한효소를 분석에 이용하였다. 절편양상을 설 비교하여 전체 절편중 공통된 절편의 개수를 구하고 이로부터 염기위치당 염기치환율을 구하였으며, 이를 균주간의 진화거리로 계산하여 PHYLIP package의 Neighbor-joining 방법에 이한 계통도를 얻고 그 결과를 고찰하였다. 특이한점은 G. lucidum의 3균주와 G. lobatum 이 유연관계가 많이 있다는 점이다. 이러한 결과는 G. lucidum과 G. lobatum은 종의 다양성으로 인하여 과거부터 복합종으로 취급되어 왔으며 고전적인 영지속의 분류에 문제점이 많이 있음을 시사해 주고 있다. 따라서 영지속의 분류가 진화경로에 바탕을 둔 자연분류가 되기 위해서는 형태분류 뿐만 아니라 배양 분류와 분자생물학적이 sqnstjr등 다양한 기준에 의해서 재고되어야 할 것으로 판단된다.

  • PDF

Determination of Corticosteroids in Moisturizers by LC-MS/MS

  • Park, Sumin;Choi, Gye Young;Lee, Seon-Ah;Kim, Hyun Jeong;Yum, Hye Yung;Paeng, Ki-Jung
    • Mass Spectrometry Letters
    • /
    • 제7권1호
    • /
    • pp.26-29
    • /
    • 2016
  • Simultaneous determination of three corticosteroids (clobetasol propionate, betamethasone dipropionate, fluticasone propionate) in moisturizers was performed by using liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS). Sample preparation was conducted by the liquid-liquid extraction (LLE). Moisturizers include emulsifying agent and it forms micelles. In order to improve the extraction efficiency of corticosteroids trapped in micelle, newly developed-optimized extraction conditions which can remove the matrix effect from moisturizers was applied with various pH conditions in LLE extraction stage of sample preparation. Thus, the addition of 10 μL of 1 M HCl into moisturizers sample before extraction could improve the extraction efficiency. For the quantitative analysis, SRM table that contained specific transition of all of target corticosteroids was created. The developed method was validated for linearity, accuracy, precision, limit of detection (LOD), limit of quantization (LOQ) and recovery. Over the 0.99 r2 value was obtained in calibration standard range. Effective accuracy and precision were also obtained. LODs were below 31 ng/mL and LOQs were estimated below 94 ng/mL for all corticosteroids tested.

Mahalanobis Distance 를 이용한 차량 D 단 소음의 음질 평가 (Sound Quality Evaluation of the Level D Noise for the vehicle using Mahalanobis Distance)

  • 박상길;박원식;심현진;이정윤;오재응
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 추계학술대회논문집
    • /
    • pp.311-317
    • /
    • 2007
  • The reduction of the Vehicle interior noise has been the main interest of NVH engineers. The driver's perception on the vehicle noise is affected largely by psychoacoustic characteristic of the noise as well as the SPL. The previous methods to evaluation of the SQ about vehicle interior noise are linear regression analysis of subjective SQ metrics by statistics and the estimation of the subjective SQ values by neural network. But these are so depended on jury test very much that they result in many difficulties. So, to reduce jury test weight, we suggested a new method using Mahalanobis distance for SQ evaluation. And, optimal characteristic values influenced on the result of the SQ evaluation were derived by signal to noise ratio(SN ratio) of the Taguchi method. Finally, the new method to evaluate SQ is constructed using Mahalanobis-Taguchi system(MTS). Furthermore, the MTS method for SQ evaluation was compared by the result of SQ grade table at the previous study and their virtues and faults introduced.

  • PDF