• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.439-441
• /
• 2002

The aim of this study is to reconstruct the 3D target volume from multiple projection images. It was assumed that we were already aware of the target position exactly, and all processes were performed in Target Coordinates whose origin was the center of the target. We used six projections: two projections were used to make a Reconstruction Box and four projections were for image acquisition. Reconstruction Box was made up of voxels of 3D matrix. Projection images were transformed into 3D volume in this virtual box using geometrical based back-projection method. Algorithm was applied to an ellipsoid model and horse-shoe shaped model. Projection images were created using C program language by geometrical method and reconstruction was also accomplished using C program language and Matlab(The Mathwork Inc., USA). For ellipsoid model, reconstructed volume was slightly overestimated but target shape and position was proved to be correct. For horse-shoe shaped model, reconstructed volume was somewhat different from original target model but there was a considerable improvement in target volume determination.

• 센서학회지
• /
• 제25권2호
• /
• pp.79-85
• /
• 2016

This paper proposes a threshold-based fall recognition algorithm to discriminate between falls and activities of daily living (ADL) using a tri-axial accelerometer and a bi-axial gyroscope sensor mounted on the upper sternum. The experiment was executed ten times according to the proposed experimental protocol. The output signals of the tri-axial accelerometer and the bi-axial gyroscope were measured during eight falls and eleven ADL action sequences. The threshold values of the signal vector magnitude (SVM_Acc), angular velocity (${\omega}_{res}$), and angular variation (${\theta}_{res}$) parameter were calculated using MATLAB. From the preliminary study, three thresholds (TH1, TH2, and TH3) were set so that the falls could be distinguished from ADL. When the parameter SVM_Acc is greater than 2.5 g (TH1), ${\omega}_{res}$ is greater than 1.75 rad/s (TH2), and ${\theta}_{res}$ is greater than 0.385 rad (TH3), these action sequences are recognized as falls. If at least one or more of these conditions is not satisfied, the sequence is classified as ADL.

• 한국항행학회논문지
• /
• 제12권6호
• /
• pp.574-582
• /
• 2008

본 논문에서는 Galileo 신호를 처리하는 소프트웨어 개발에 관한 연구를 설명한다. L1 RF단을 거쳐 ADC 샘플링된 중간 주파수데이터로부터 MATLAB툴을 이용하여 Galileo E1 신호를 처리하는 소프트웨어의 구조를 설명하고 성능을 분석하였다. E1-B 신호를 대상으로 신호의 획득, 추적, 항법 데이터를 추출 단계를 수행하고 Galileo Giove-A 실제 신호 저장 데이터를 처리하여 결과물을 검증하였다.

• 한국멀티미디어학회논문지
• /
• 제18권2호
• /
• pp.128-137
• /
• 2015

Blood oxygen saturation ($SpO_2$) is so important to be called bio-signal of the fifth. The measurement of blood oxygen saturation based on broad-ban light source has advantages of simple testing facility and easy understanding. This paper proposes a LabVIEW program which measures blood oxygen saturation based on broad-band light source. It combines LabVIEW and MATLAB, utilizing different light absorptions of oxyhemoglobin and deoxyhemoglobin in the visual wavelength range of 450nm-750nm to determine blood oxygen saturation. In order to improve accuracy through reducing the impact of hand shaking, the probe is fixed to the motor stage and then move a constant distance between the probe and the sample to be measured. Experimental results show that the proposed method noticeably increases the accuracy and saves time compared with the conventional methods.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.353-356
• /
• 2008

HEV(Hybrid Electrical Vehicle) is considered as one of the next generation vehicles. To develop the HEV, there must be a reliable simulator, by which the capacities of the power resources are tested, and the parameters of the HEV are optimized before developing the real model of the HEVs. This process can save the money for designing the HEV system and improve the system without experiments. Matlab Simulink is familiar to mechanical engineers and the program can simultaneously provide a system model and a controller in one program. Nowadays, the Simdriveline toolbox which is used for analysis a power-train system is applied to build a dynamic model for a HEV system. In this study, we make a HEV simulator with the Simdriveline toolbox and develop a controller. There are two simple strategies, applied to the controller. One strategy includes a power split ratio and a shift map which are created by user. Other strategy calculated an appropriate amount of resource's torque along specific results, and this is useful when users can't develop a fitting controller. The methodologies for configuring the simulator and its control system are presented in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.691-706
• /
• 2008

ATP(Automatic Train Protection) system in railway signaling system is the important one grasping the position and velocity of a train. The wayside transmitter of ATP system is installed between rails. In concrete slab track, the signal current using wayside transmitter of ATP system is influenced by reinforcing bars. The magnetic coupling between reinforcing bars and wayside transmitter of ATP system as a filter makes an input current distorted. So, it makes an alternating current signal with a desirable size not transmit to on-board system of a train. Way to decrease the distortion of an input current signal frequency is to avoid maximum induction current frequency. And the induction phenomenon between reinforcing bars insulated and wayside transmitter of ATP system does not occur. In this paper, we represent the model about wayside transmitter of ATP system and reinforcing bars on the concrete slab tracks, and calculated the parameters demanded for the model. Also, we demonstrated it through the Maxwell program. Furthermore, we calculated impedance on wayside transmitter used in KVB system and ERTMS/ETCS system which are a kind of ATP system, frequency response of induction current, using the Matlab, and demonstrated the validity of it, using the PSpice program.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.13-22
• /
• 2013

It is difficult to analytically derive a volumetric displacement formula of gerotor hydraulic pump/motor because geometric shape of rotors is complicated. An analytical method about the volumetric displacement is proposed in this work, which is relatively easy and based upon two physical concepts. The first one is energy conservation between hydraulic energy of the pump/motor and mechanical input/output energy. The second concept is torque equilibrium with respect to inner and outer rotors. The formula about the volumetric displacement is derived for the common case of inner and outer rotors rotate with respect to fixed axes. The formula is verified by comparing another analytical displacement formula, and it is numerically verified by comparing numerical results, which is calculated for geometric specification of a motor. The numerical displacement is calculated through CAD software program and MATLAB program. The proposed analytical formula can be utilized in analysis and design of hydraulic gerotor motors.

• 국제초고층학회논문집
• /
• 제8권1호
• /
• pp.71-82
• /
• 2019

The purpose of this study is to evaluate the indoor air quality (IAQ) and energy benefits of a dedicated outdoor air system (DOAS) and compare them with a conventional variable air volume (VAV) system. The DOAS is a decoupled system that supplies only outdoor air, while reducing its consumption using an enthalpy wheel. The VAV system supplies air that is mixed outdoor and transferred indoor. The VAV has the issue of unbalanced ventilation in each room in multiple zones because it supplies mixing air. The DOAS does not have this problem because it supplies only outdoor air. That is, the DOAS is a 100% outdoor air system and the VAV is an air conditioning system. The transient simulations of carbon dioxide concentration and energy consumption were performed using a MATLAB program based on the thermal loads from the model predicted by the TRNSYS 18 program. The results indicated that when the air volume is large, such as in summer, the distribution of air is not appropriate in the VAV system. The DOAS however, supplies the outdoor air stably. Moreover, in terms of annual primary energy consumption, the DOAS consumed approximately 40% less energy than the VAV system.

• 생물정신의학
• /
• 제19권2호
• /
• pp.77-83
• /
• 2012

Objectives : Although there have been studies that examine sex differences of the brain structures using magnetic resonance imaging, studies that specifically investigate cerebellar structural differences between men and women are scarce. The purpose of current study was to examine sex differences in structures of the cerebellum using cerebellar template and cerebellum analysis methods. Methods : Sixteen men and twenty women were included in the study. A MATLAB based program (MathWorks, Natick, MA, USA), Statistical Parametric Mapping 5 (SPM5) using the spatially unbiased infra-tentorial atlas template (SUIT) as the cerebellum template, was used to analyze the brain imaging data. Results : There was no significant difference in age between men (mean age=28.1) and women (mean age=27.2). Men showed higher gray matter density than women in two left cerebellar areas including the clusters in the lobules IV and V (a cluster located across the lobules IV and V), and the lobule VIIIb (lobules IV and V, t=4.75, p<0.001 ; lobule VIIIb, t=3.08, p=0.004). Conclusions : The current study found differences in cerebellar gray matter density between men and women. The current study holds its significance for applying the template specifically developed for the analysis of cerebellum.

• 대한전자공학회논문지TC
• /
• 제49권5호
• /
• pp.21-26
• /
• 2012

인트라세션 네트워크 코딩은 멀티 홉 무선 네트워크의 스케줄링을 간소화하고 패킷 전송의 효율성을 통하여 처리율을 향상시킬 수 있는 방법으로 제시되었다. 다중 레이트는 대부분의 무선 네트워크에서 사용되고 있으며 기존 연구에서 기회주의적 라우팅 방식과 결합하여 처리율의 증가를 보였다. 본 논문에서는 다중 레이트와 인트라세션 네트워크 코딩 방식을 사용하여 멀티 홉 네트워크 환경에서 처리율을 향상하기 위한 방법을 제안한다. 네트워크 모델을 인트라세션 네트워크 환경으로 모델링하고 제안한 레이트 선택 방법을 통하여 각 노드에서 최적인 전송 속도를 결정한다. 선형계획법을 사용하여 최대 처리율을 도출하고 MATLAB과 lp_solve IDE 프로그램을 이용하여 성능을 평가한다. 성능평가 결과를 통해 다중 레이트를 사용할 경우 단일 레이트 환경에 비하여 처리율이 향상되며 인트라세션 네트워크 코딩 방식은 기회주의적 라우팅 방식에 비하여 처리율이 향상됨을 보였다.