• 한국균학회지
• /
• 제48권4호
• /
• pp.389-396
• /
• 2020

표고는 한국에서 가장 많이 소비되는 식용버섯 중 하나이다. 표고는 사극성의 교배계를 따르며, 표고의 교배형은 자웅이주성의 다른 담자균류와 마찬가지로 서로 독립적인 두 유전자좌, A와 B에 의해 결정된다. 표고의 A 유전자좌에는 한 쌍의 homeodomain (HD) 전사인자가 암호화되어 있으며 이들의 N말단에서 나타나는 높은 변이가 A 교배형의 다양성에 중요한 것으로 알려져 있다. 본 연구에서는 표고 품종과 야생종에서 많이 발견되는 11종의 A 교배형을 구분할 수 있는 CAPS 마커를 개발하고자 하였다. A 유전자좌에서 변이가 큰 부분을 PCR을 통해 증폭한 뒤 두 가지 제한효소 HaeIII와 EcoRI로 절단하여 DNA 단편의 크기 및 양상을 살펴봄으로써 11종의 A 교배형을 서로 구별할 수 있었다. 또한 해당 방법이 이핵균주의 교배형을 확인하는 데 활용할 수 있는지도 살펴보았다.

• 한국식물병리학회지
• /
• 제10권3호
• /
• pp.192-196
• /
• 1994

Two hundred and fourty-seven isolates of Phytophthora infestans obtained from infested potato leaves from the spring of 1991 to the fall of 1993 from potato fields in various regions of Korea were tested for their fungicides resistances. A total of 20.9% isolates were not suppressed at 50 ppm of metalaxyl in 1991, but isolates from 1993 were suppressed at 50 ppm of metalaxyl. Ten resistant isolates and 10 susceptible isolates to metalaxyl were selected and tested against oxadixyl, fosetyl-Al, and phosphorous acid. Effectiveness of these chemicals were no better than that of metalaxyl. Dimethomorph suppressed all isolates at 1 $\mu\textrm{g}$/ml suggesting that it might be a potential chemical to control Phytophthora infestans. Mating types of all isolates from diseased leaves in 1993 turned out to be A2 type.

• 생명과학회지
• /
• 제6권3호
• /
• pp.165-170
• /
• 1996

The action of phospholipid on the rhodotorucine A(RH.A) acceptance by heterbasidiomyceteous yeast Rhodosporidium toruloides mating type a cells and the effect of medium composition during sexual differentiation were investigated. Activation of trigger peptidase(TPase)was very sensitive to the originated phospholipid from R. toruloides and was more sensitive to phospholipid liposome made up of phospholipi. Phospholopod present on the membrance of mating type a cells consists of phospatidylglycerol(PG), phosphatidylethanolamine(PE), phospatidylcholine(PC), phospatidylinositol(PI), and phosphatidylserine(PS) of 12.9, suprisingly 45.4, 11.0, and 13.9%, respectively. As the result of using C-1 and N-1 mediums which limited C and N sources capable of inhibiting the synthesis of phospholipid, it resulted inhibiting sexual dlfferentiation and production of Rh.A from mating type Acells.

• 한국미생물·생명공학회지
• /
• 제23권3호
• /
• pp.249-254
• /
• 1995

When mating type A and a cells of heterobasidiomycetous yeast Rhodosporidium toruloides were mix-cultured, both of the mating type cells have shown strong agglutination. But this agglutination was not detactable when the A and a cell were cultured separately. From reagglutination made just after the result of disassembling the agglutination by sonication, we knew that the agglutination was sexual-agglutination, not simple physical cell agglutination. The sexual agglutination was progressed actively on logarithmic phase and, in addition, progressed faster on mating type a cell treated with rhodotorucine A. These sexual agglutination have been inhibited by several protease such as trypsin, pronase, chymotrpysin and thermolysin and inhibited by 5 mM DTT as well.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.88.2-89
• /
• 2003

Changes of control efficacy of metalaxyl to potato late blight caused by Phytophthora infestans were examined in potato fields from 2001 to 2003. In 2001 and 2002, control efficacy of metalaxyl was similar to those of dimethomorph and ethaboxam. However, the control efficacy of metalaxyl were decreased to 50.3％ in 2003. Total 366 isolates of P infestans obtained from several areas in Korea from 2001 to 2003 were examined for changes of sensitivity to metalaxyl. About 6.8％ of fungal isolates examined in 2001 were sensitive, 84.1％ were intermediate resistant, 9.1％ were resistant to metalaxyl. Among the isolates collected in 2002, 3.9％ were sensitive, 75.6％ were intermediate resistant, 20.6％ were resistant to the chemical. However, among the isolates obtained in 2003, 55.9％ were intermediate resistant, 44.1％ were resistant, but none of the isolates tested were sensitive. Both A1 and A2 mating type isolate were isolated in 2002∼2003. However, all isolates collected in 2001 were A1 mating type. About 87.5％ of the isolates collected in 2002, 89.8％ In 2003 were determined as A1 mating type. The majority of the p. infestans isolates were A1 mating types. Changes of control efficacy of metalaxyl to potato late blight might be caused by the occurrence rate of moderately resistant isolates within A1 mating type.

• The Plant Pathology Journal
• /
• 제17권5호
• /
• pp.276-280
• /
• 2001

Fusarium isolates of Gibberella fujikuroi species complex were obtained from sorghum grown in five provinces of Korea in 1996 and 1997. These isolates were characterized based on their mating behavior, mycotoxin production, and vegetative compatibility. Only three mating populations (A, D, and F) were recovered from a total of 155 isolates examined. The relative frequency of the mating populations was significantly different: F was predominant (80%), while D and A were observed at low frequencies of 9% and 3%, respectively. Female fertile isolates were more common within F (44 our of 124) than D (2 out of 14), while none of the five A isolates were female fertile. The inbreeding effective population sizes ($\textrm{N}_e$)for mating type and male/hermaphrodite ratios in mating populations A and D produced significant amounts of fumonisins, while F isolates produced none or only traces of fumonisin B$_1$. In contrast. F isolates produced higher amounts of moniliformin (average of 3,820 ppm) than A and D isolates (averages of 77 and 1,819 ppm, respectively). Fifty-one isolates were tested for vegetative compatibility using nitrogen non-utilization mutants of each isolate, and 44 vegetative compatibility groups (VCGs) were identified. A single VC type (VC1) was found in all of the five A isolates examined. Six of the D isolates examined consisted of three VC types: two for VC2, two for VC3, and the rest for VC4. All of the F isolates tested were incompatible in every combination and , thus, each constituted a unique VCG.

• 한국미생물·생명공학회지
• /
• 제20권6호
• /
• pp.625-629
• /
• 1992

서로 다른 성접합형 A와 a를 가지는 Rhodosporidium toruloides가 생산하는 invertase를 조사한 결과, 접합형 A는 세포내, 세포벽 결합, 세포의 분비성 invertase의 3가지를 생산하였으나, 접합형 a는 세포외 invertase를 생산하지 않는 접합형 특이성이 있는 것을 알았다. 양 접합형 세포로부터 세포내 invertase를 부분정제하여 이들의 성질을 비교한 결과, 접합형 A세포 유래의 효소는 $Zn^{2+}$에 의하여 11의 활성 상승효과와Mn^{2+}$에 의한 42.2%의 감소를 보이는 반면, a세포 유래의 효소는 $Mn^{2+}$에 의한 15의 활성 감소만을 보였다. 효소 저해제의 효과에서 a세포의 invertase는 2-mercaptoethanol, sodium dodecyl sulfate, pheonl에만 약간 저해를 받을 뿐이었다. 이들 양 효소의 열안정성은 모두 $80^{\circ}C$ 이상에서 급격히 실활되는 양상을 보였으며 최적 온도가 $60^{\circ}C$로 둘다 비슷하였다. a세포 유래의 invertase는 pH 3에서 pH 10까지 넓은 pH의 범위에서 안정하며 최적 pH가 4.0인반면, A 세포의 invertase는 pH 3에서 pH 6까지 산성의 조건에서만 안정하였으며 최적 pH는 5.0으로 나타났다.그리고, A 세포와 atpvh 유래 invertase의 $K_m$값은 각각 $2.5{\times}10^3$M 과 $3.4{\times}10^3$M과 이였다.

• 미생물학회지
• /
• 제27권3호
• /
• pp.210-215
• /
• 1989

In order to elucidate and characterize the signal transduction pathway(s) whereby yeast cells respond to mating pheromone, we have isolated mutants which are able to conjugate in the absence of the alpha-factor receptor. Sixty-one suppressors of a ste2-deletion mutation which also confer a ts conditional "start" arrest phenotypw have been subjected to genetic analysis. The mutants could be assigned to three complementation groups designated CDC70, CDC72 and CDC73, which are unlinked to each other as well as to the previously identified start genes. Quantitation of mating ability of the cdc70, cdc72 and cdc73 mutations in a ste2-deletion background gives levels ranging from 0.1% to 0.3% of wild type, depending on the allele and the gene. The results indicate that the signals from mating pheromone might be mediated by the CDC70, CDC72 and CDC73 products. products.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.260-266
• /
• 2002

DLC films were deposited on Si wafer by RF plasma assisted CVD using CH4 gas. Tribological tests were conducted using rotating type ball on disk friction tester in dry air. Four kinds of mating balls were used. The mating balls were made with stainless steel but apply different annealing conditions to achieve different hardness conditions. Testing results in all load conditions showed that the harder the mating materials, the lower the friction coefficient among the three kind of martensite mating balls. In case of austenite balls, the friction coefficients were lower than fully annealed martensite ball. The high friction coefficient in soft martensite balls seems to be caused by the larger contact area between DLC film and ball. The wear tracks of DLC films and mating balls could have proven that effect. Measuring the wear track of both DLC films and mating balls have similar tendency comparing to the results of friction coefficients. Wear rate of austenite balls were also smaller than that of fully annealed martensite ball. The results of effect of applying load showed, the friction coefficients were become decrease when the applying loads exceed critical load conditions. The wear track of mating balls showed that some material transfer occurs from DLC film to mating ball during the high friction process. Raman spectra analysis showed that transferred material was a kind of graphite and contact surface of DLC film seems to undergo phase transition from carbon to graphite during the high friction process.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.139-147
• /
• 2019

This study investigates the effects of corrosion resistance characteristics of opponent materials in relative motion on the sliding wear behavior of mild carbon steel. Pin specimens made of mild carbon steel are tested at several sliding speeds against mating discs made of two types of alloyed steels, such as type D2 tool steel (STD11) and type 420 stainless steel (STS420J2), with different corrosion resistance characteristics in a pin-on-disc type sliding wear test machine. The results clearly show that the sliding wear behavior of mild carbon steel is influenced by the corrosion resistance characteristics of the mating disc materials at low sliding speeds. However, the sliding wear behavior at high sliding speeds is irrelevant to the characteristics because of the rising temperature. During the steady state wear period, the sliding wear rate of mild carbon steel against the type 420 stainless steel at a sliding speed of 0.5 m/s increases considerably unlike against the type D2 tool steel. This may be because the better corrosion resistance characteristics achieve a worse tribochemical reactivity. However, during the running-in wear period at low sliding speeds, the wear behavior of mild carbon steel is influenced by the microstructure after heat treatment of the mating disc materials rather than by their corrosion resistance characteristics.