• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2195-2201
• /
• 2009

본 논문은 R290, R600a, R1270과 같은 탄화수소계 냉매를 사용하는 냉동사이클의 효율에 대한 흡입관 열교환기의 영향을 고려하였다. 이러한 흡입관 열교환기는 냉동시스템의 성능을 향상시킬 수도 있지만, 성능을 저하시킬 수도 있다. 본 논문에서는 흡입관 열교환기를 가진 냉동사이클의 성능 특성을 파악하기 위해서 정상상태의 수학적 모델을 사용하였다. 그리고 탄화수소계 냉매유량, 흡입관 열교환기의 내관 직경, 길이, 유용도 등과 같은 운전조건의 영향을 분석하였다. 연구결과는 흡입관 열교환기의 내관 직경, 길이, 유용도, 탄화수소계 냉매의 질량유량은 냉동사이클의 상대냉동능력지수, 냉동능력, 압축일량에 영향을 미치는 것을 알 수 있었다. 따라서 이러한 영향을 상세히 파악하여, 흡입관 열교환기를 설치한 탄화수소계 냉매용 증기압축식 냉동사이클을 설계할 필요가 있다.

• Journal of Information Science Theory and Practice
• /
• 제3권2호
• /
• pp.42-57
• /
• 2015

Purpose. : The present study is an attempt to find out the impact of self-citations on Impact Factor (IF) across disciplines. The study examines the number of research articles published across 27 major subject fields covered by SCImago, encompassing as many as 310 sub-disciplines. The study evaluates aspects like percentage of self-citations across each discipline, leading self-citing countries and continents, and the impact of self-citation on their IF. Scope. : The study is global in nature, as it evaluates the trend of self-citation and its impact on IF of all the major subject disciplines of the world, along with countries and continents. IF has been calculated for the year 2012 by analyzing the articles published during the years 2010 and 2011. Methodology/Approach. : The study is empirical in nature; as such, statistical and mathematical tools and techniques have been employed to work out the distribution across disciplines. The evaluation has been purely under-taken on the secondary data, retrieved from SCImago Journal and Country Ranking. Findings. : Self-citations play a very significant part in inflating IF. All the subject fields under study are influenced by the practice of self-citation, ranging from 33.14% to 52.38%. Compared to the social sciences and the humanities, subject fields falling under the purview of pure and applied sciences have a higher number of self-citations, but a far lesser percentage than the social sciences and humanities. Upon excluding self-citations, a substantial amount of change was observed in the IF of subject fields under study, as 18 (66.66%) out of 27 subjects fields faced shuffle in their rankings. Variation in rankings based on IF with and without self-citation was observed at subject level, country level, and continental level.

• 한국컴퓨터산업학회논문지
• /
• 제3권1호
• /
• pp.77-84
• /
• 2002

다수의 서버를 클러스터로 연결하여 동시에 가동 할 경우 서버의 대수가 증가함으로 인해 발생하는 가용도 저하문제와 소프트웨어의 노화로 인하여 높은 가용도를 제공하기가 어렵다. 본 연구에서는 n대의 주 서버와 k 대의 여분서버로 구성되는 클러스터 웹 서버 시스템에서 가동되는 서버의 수, 여분서버의 수, 소프트웨어의 재활주기, 재활소요시간, 서버의 고장률, 서버의 수리율, 서버의 불안정률 등의 시스템 운영 파라미터에 기초하여, 소프트웨어의 재활정책에 대한 평가를 위해 평형 상태에서의 확률, 정지시간, 가용도, 손실비용 등을 계산하였다. 수학적 분석을 통해 다양한 시스템 운영 상태에 대한 실험을 통해 검증하였으며, 소프트웨어의 재활 정책에 의한 예방적 결함허용 기법이 시스템의 안정성에 중요한 요소임을 확인하였고, 또한 서버의 고장률 및 불안정률이 소프트웨어 재활 정책 결정에 중요한 요소임을 파악하였다.

• 한국지형학회지
• /
• 제24권3호
• /
• pp.105-118
• /
• 2017

The debris slope landforms which are existent in Korean mountains is generally on the steep slopes and mostly covered by vegetation, it is difficult to investigate the landform. Therefore a scientific method is required to come up with an effective field investigation plan. For this purpose, the use of Remote Sensing and GIS technologies for a spatial analysis is essential. This study has extracted the potential area of debrisslope landform formation using Fuzzy set and Bayesian Predictive Discriminate Model as mathematical data integration methods. The first step was to obtain information about debris locations and their related factors. This information was verified through field investigation and then used to build a database. In the second step, the map that zoning the study area based on the degree of debris formation possibility was generated using two modeling methods, and then cross validation technique was applied. In order to quantitatively analyze the accuracy of two modeling methods, the calculated potential rate of debrisformation within the study area was evaluated by plotting SRC(Success Rate Curve) and calculating AUC(Area Under the Curve). As a result, the prediction accuracy of Fuzzy set model wes 83.1% and Bayesian Predictive Discriminate Model wes 84.9%. It showed that two models are accurate and reliable and can contribute to efficient field investigation and debris landform management.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1505-1514
• /
• 2019

The permanent magnet synchronous motor (PMSM) is widely used in various fields and the proportional-integral (PI) controller is popular in PMSM control systems. However, the motor parameters are usually unknown, which can lead to a complicated PI controller design and poor performance. In order to design a PI controller with good performance when the motor parameters are unknown, a control algorithm based on stability margin is proposed in this paper. First of all, based on the mathematical model of the PMSM and the least squares (LS) method, motor parameters are estimated offline. Then based on the estimation values of the motor parameters, natural angular frequency and phase margin, a PI controller is designed. Performance indices including the natural angular frequency and the phase margin are used directly to design the PI controller in this paper. Scalar functions of the d-loop and the q-loop are selected. It can be seen that the designed controller parameters satisfy Lyapunov large scale asymptotic stability theory if the natural angular frequencies of the d-loop and the q-loop are large than 0. Experimental results show that the parameter estimation method has good accuracy and the designed PI controller proposed in this paper has good static and dynamic performances.

• 대한토목학회논문집
• /
• 제39권5호
• /
• pp.623-630
• /
• 2019

아시아 건설시장의 전략적 중요성이 높아지면서 기업 간 경쟁이 더욱 치열해지고 있다. 기존의 아시아 건설시장에 대한 연구는 주요 국가로의 진출전략 도출, 분야별 리스크 평가에 대한 정성적 접근이 주류를 이루었던 반면, 다수 기업의 역동적인 경쟁구도를 정량적으로 설명한 연구는 드물었다. 이에 본 연구는 국내 건설기업이 2009년부터 2017년까지 계약을 체결한 3,996건의 프로젝트 정보를 바탕으로 아시아 지역의 계약실적 구조를 분석하였다. 정태적 분석에는 시장 집중도, 동태적 분석에는 시장 이동성 및 불안정성 개념을 각각 활용하였으며, 이에 대한 수학적 모델을 소개하였다. 분석 결과, 정태적 측면에서는 아시아 건설시장에서 국내 상위 기업군의 시장 점유율 집중 현상이 나타나고 있으며, 동태적 측면에서는 산업설비 공종을 제외한 대부분의 경우 시장 지위가 약하고 안정성이 떨어지는 것으로 밝혀졌다. 본 연구에서 제시한 분석 방법론과 결과는 산업 차원의 실적에 대한 체계적 진단을 가능케 하며, 향후 경쟁전략 수립을 위한 기초자료를 제공하였다는 점에서 의의가 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.293-300
• /
• 2008

Efficient designing of SRM Grains in the field of Rocketry is still the main test for most of the nations of world for scientific studies, commercial and military applications. There is a strong need to enhance thrust, improve the effectiveness of SRM and reduce mass of motor and burning time so as to allow the general design to increase the weight of payload/on board electronics. Moreover burning time can be increased while keeping the weight of the propellant and thrust in desired range, so as to give the time to control / general design group in active phase for incorporating delayed cut off if required. A mathematical design, optimization & analysis technique for Slotted Tube Grain has been discussed in this paper. In order to avoid the uncertainties that whether the Slotted Tube grain configuration being designed is best suited for achieving the set design goals and optimal of all the available designs or not, an efficient technique for designing SRM Grain and then getting optimal solution is must. The research work proposed herein addresses and emphasizes a design methodology to design and optimize Slotted Tube Grain considering particular test cases for which the design objectives and constraints have been given. In depth study of the optimized solution have been conducted thereby affects of all the independent parametric design variables on optimal solution & design objectives have been examined and analyzed in detail. In doing so, the design objectives and constraints have been set, geometric parameters of slotted tube grain have been identified, performance prediction parameters have been calculated, thereafter preliminary designs completed and finally optimal design reached. A Software has been developed in MATLAB for designing and optimization of Slotted Tube grains.

• Smart Structures and Systems
• /
• 제9권6호
• /
• pp.505-534
• /
• 2012

The present work deals with second order statistics of post buckling response of piezoelectric laminated composite cylindrical shell panel subjected to hygro-thermo-electro-mechanical loading with random system properties. System parameters such as the material properties, thermal expansion coefficients and lamina plate thickness are assumed to be independent of the temperature and electric field and modeled as random variables. The piezoelectric material is used in the forms of layers surface bonded on the layers of laminated composite shell panel. The mathematical formulation is based on higher order shear deformation shell theory (HSDT) with von-Karman nonlinear kinematics. A efficient $C^0$ nonlinear finite element method based on direct iterative procedure in conjunction with a first order perturbation approach (FOPT) is developed for the implementation of the proposed problems in random environment and is employed to evaluate the second order statistics (mean and variance) of the post buckling load of piezoelectric laminated cylindrical shell panel. Typical numerical results are presented to examine the effect of various environmental conditions, amplitude ratios, electrical voltages, panel side to thickness ratios, aspect ratios, boundary conditions, curvature to side ratios, lamination schemes and types of loadings with random system properties. It is observed that the piezoelectric effect has a significant influence on the stochastic post buckling response of composite shell panel under various loading conditions and some new results are presented to demonstrate the applications of present work. The results obtained using the present solution approach is validated with those results available in the literature and also with independent Monte Carlo Simulation (MCS).

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.581-609
• /
• 2012

In this paper a novel non-iterative approach is proposed to address the problem of deriving non-stationary stochastic processes which are compatible in the mean sense with a given (target) response (uniform hazard) spectrum (UHS) as commonly desired in the aseismic structural design regulated by contemporary codes of practice. This is accomplished by solving a standard over-determined minimization problem in conjunction with appropriate median peak factors. These factors are determined by a plethora of reported new Monte Carlo studies which on their own possess considerable stochastic dynamics merit. In the proposed approach, generation and treatment of samples of the processes individually on a deterministic basis is not required as is the case with the various approaches found in the literature addressing the herein considered task. The applicability and usefulness of the approach is demonstrated by furnishing extensive numerical data associated with the elastic design UHS of the current European (EC8) and the Chinese (GB 50011) aseismic code provisions. Purposely, simple and thus attractive from a practical viewpoint, uniformly modulated processes assuming either the Kanai-Tajimi (K-T) or the Clough-Penzien (C-P) spectral form are employed. The Monte Carlo studies yield damping and duration dependent median peak factor spectra, given in a polynomial form, associated with the first passage problem for UHS compatible K-T and C-P uniformly modulated stochastic processes. Hopefully, the herein derived stochastic processes and median peak factor spectra can be used to facilitate the aseismic design of structures regulated by contemporary code provisions in a Monte Carlo simulation-based or stochastic dynamics-based context of analysis.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.109-116
• /
• 2015

This paper is concerned with the single vendor single buyer integrated production inventory problem. To make this problem more practical, space restriction and lead time proportional to lot size are considered. Since the space for the inventory is limited in most practical inventory system, the space restriction for the inventory of a vendor and a buyer is considered. As product's quantity to be manufactured by the vendor is increased, the lead time for the order is usually increased. Therefore, lead time for the product is proportional to the order quantity by the buyer. Demand is assumed to be stochastic and the continuous review inventory policy is used by the buyer. If the buyer places an order, then the vendor will start to manufacture products and the products will be transferred to the buyer with equal shipments many times. The mathematical formulation with space restriction for the inventory of a vendor and a buyer is suggested in this paper. This problem is constrained nonlinear integer programming problem. Order quantity, reorder points for the buyer, and the number of shipments are required to be determined. A Lagrangian relaxation approach, a popular solution method for constrained problem, is developed to find lower bound of this problem. Since a Lagrangian relaxation approach cannot guarantee the feasible solution, the solution method based on the Lagrangian relaxation approach is proposed to provide with a good feasible solution. Total costs by the proposed method are pretty close to those by the Lagrangian relaxation approach. Sensitivity analysis for space restriction for the vendor and the buyer is done to figure out the relationships between parameters.