• 제목/요약/키워드: Materials characterization

검색결과 2,946건 처리시간 0.027초

선체구조용 EH36 TMCP 후판의 FCAW 및 EGW 조합 용접부 기계적 성질에 미치는 개선조건의 영향 (Effect of Groove Conditions on the Mechanical Properties of Welds Produced by the Combined Welding Process of Flux Cored Arc and Electro Gas in EH36 TMCP Steel Plate for Hull Structures)

  • 김기혁;김기원;심호섭;배강호;홍현욱;박병규
    • Journal of Welding and Joining
    • /
    • 제33권5호
    • /
    • pp.35-40
    • /
    • 2015
  • Characterization of microstructures and mechanical properties of 83mm thickness EH36-TM welds produced by the combined flux cored arc (FCA) and electro gas (EG) welding processes has been studied with the two different groove conditions, single-V (SV) and double-V (DV) bevels. The welding consumables used for FCA and EG welding processes were ASME/AWS A5.29 (E81T1-K2) and A5.26 (EG72T), respectively. Experimental results showed that all the mechanical properties of welds such as tensile property, CVN toughness and Vickers hardness met IACS requirements. The tensile strength of EG welded plates were reduced by approximately 4% (DV: 3.8%, SV: 4.2%) compared to the base metal. The hardness value of SV-beveled weld metal was slightly lower than that of DV-beveled one. There were no significant differences as per welding groove conditions except for the weld metal. In addition, at the fusion line, the toughness of SV condition was 20J lower and the weld metal was 40J lower than DV condition, respectively. On the basis of microstructural analysis, grain boundary ferrite (GBF) structures for SV condition were 2 times higher volume fraction than for DV condition and their packet sizes were coarsened to almost double. It was thus suggested that the GBF volume fractions and packet sizes in the weld metal of EH36-TM steel plates are the most important factors affecting the mechanical properties of the combined FCA and EG welded joint. Nevertheless, all the results of welds with both DV and SV conditions were found to be excellent.

DETERMINATION OF MOISTURE AND NITROGEN ON UNDRIED FORAGES BY NEAR INFRARED REFLECTANCE SPECTROSCOPY(NIRS)

  • Cozzolino, D.;Labandera, M.;Inia La Estanzuela
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1620-1620
    • /
    • 2001
  • Forages, both grazed and conserved, provide the basis of ruminant production systems throughout the world. More than 90 per cent of the feed energy consumed by herbivorous animals world - wide were provided by forages. With such world - wide dependence on forages, the economic and nutritional necessity of been able to characterize them in a meaningful way is vital. The characterization of forages for productive animals is becoming important for several reasons. Relative to conventional laboratory procedures, Near Infrared Reflectance Spectroscopy (NIRS) offers advantages of simplicity, speed, reduced chemical waste, and more cost-effective prediction of product functionality. NIR spectroscopy represents a radical departure from conventional analytical methods, in that entire sample of forage is characterized in terms of its absorption properties in the near infrared region, rather than separate subsamples being treated with various chemicals to isolate specific components. This forces the analyst to abandon his/her traditional narrow focus on the sample (one analyte at a time) and to take a broader view of the relationship between components within the sample and between the sample and the population from which it comes. forage is usually analysed by NIRS in dry and ground presentation. Initial success of NIRS analysis of coarse forages suggest a need to better understand the potential for analysis of minimally processed samples. Preparation costs and possible compositional alterations could be reduced by samples presented to the instrument in undried and unground conditions. NIRS has gained widespread acceptance for the analysis of forage quality constituents on dry material, however little attention has been given to the use of NIRS for chemical determinations on undried and unground forages. Relatively few works reported the use of NIRS to determine quality parameters on undried materials, most of them on both grass and corn silage. Only two works have been found on the determination of quality parameters on fresh forages. The objectives of this paper were (1) to evaluate the use of NIRS for determination of nitrogen and moisture on undried and unground forage samples and (2) to explore two mathematical treatments and two NIR regions to predict chemical parameters on fresh forage. Four hundred forage samples (n: 400) were analysed in a NIRS 6500 instrument (NIR Systems, PA, USA) in reflectance mode. Two mathematical treatments were applied: 1,4,4,1 and 2,5,5,2. Predictive equations were developed using modified partial least squares (MPLS) with internal cross - validation. Coefficient of determination in calibration (${R^2}_{CAL}$) and standard error in cross-validation (SECV) for moisture were 0.92 (12.4) and 0.92 (12.4) for 1,4,4,1 and 2,5,5,2 respectively, on g $kg^{-1}$ dry weight. For crude protein NIRS calibration statistics yield a (${R^2}_{CAL}$) and (SECV) of 0.85 (19.8) and 0.85 (19.6) for 1,4,4,1 and 2,5,5,2 respectively, on a dry weight. It was concluded that NIRS is a suitable method to predict moisture and nitrogen on fresh forage without samples preparation.

  • PDF

공공도서관에서의 향토문화콘텐츠 활성화 방안에 관한 연구 (A Study on Vitalization Methods of Local Cultural Contents in the Public Libraries)

  • 노영희;강정아
    • 한국도서관정보학회지
    • /
    • 제45권4호
    • /
    • pp.67-93
    • /
    • 2014
  • 본 연구에서는 공공도서관을 중심으로 한 향토문화콘텐츠 수집, 분류, 보관 등에 대해서 조사하였으며, 정부정책 수행 시 도서관이 어떤 방법으로 향토문화콘텐츠를 확보하고 전국 공공도서관과 협력하여 대국민서비스를 제공할 수 있을 것인가에 대한 방안을 제시하고자 하였다. 선행연구, 설문조사, 사례조사 등을 통해 도출한 연구결과는 다음과 같다. 첫째, 공공도서관은 향토문화콘텐츠를 제공하는 타 기관 등과 달리 지역주민들의 접근성이 높다. 따라서 도서관은 지역주민의 지식 및 관심 강화, 지역의 역사성 보존 등의 공공적 역할을 위해 지역의 향토문화콘텐츠를 수집 보존 활용하는 역할을 담당하여야 할 것이다. 둘째, 도서관의 공공성을 기반으로 지자체 및 중앙정부의 적극적 관심과 지원 유도 그리고 타 기관과의 협력네트워크 구축 등에 의한 향토문화콘텐츠 관리여건 개선방안을 모색하여야 할 것이다. 이를 통해 지역 고유 향토문화콘텐츠 수집, 콘텐츠화 강화 및 다양한 요구를 포괄하는 이용자 중심 도서관 서비스를 확대해야 할 것이다. 셋째, 향토문화콘텐츠에 대한 정기적이고 체계적인 조사 및 구축을 통해 지역문화를 중심으로 한 도서관에서의 향토문화콘텐츠 수집, 창조, 활용의 서비스 확대를 제공해야 한다. 이를 통해 공공도서관의 위상 및 존재감 향상뿐만 아니라 장기적으로 지역 공공도서관의 새로운 역할 확대를 통한 인류문화 발전에 기여할 수 있을 것이다.

피혁폐기물(皮革廢棄物)인 Shaving scraps으로 부터 가수분해(加水分解) 단백질(蛋白質)의 제조(製造) 및 특성(特性) (Preparation and Characterization of the Hydrolyzed Protein from Shaving Scraps of Leather Waste Containing Chromium)

  • 김원주;조주식;이홍재;허종수
    • 유기물자원화
    • /
    • 제5권2호
    • /
    • pp.47-56
    • /
    • 1997
  • 피혁 제조시 발생되는 크롬을 함유한 피혁 고형폐기물인 shaving scraps의 단백질 자원화 가능성을 검토하기 위하여 알카리제로 MgO를 농도별로 처리하여 가수분해시켜 회수한 hydrolyzed protein의 특성은 다음과 같다. MgO 처리에 의한 shaving scrap의 알카리 가수분해방법에서 크롬이 불용화 되는 pH 8.0 이상을 유지하기 위해서는 MgO를 5% 이상 처리해야 하는 것으로 나타났으며, MgO 처리에 따른 alkaline condition하에서 shaving scrap의 용해도는 약 60% 수준으로서 낮았다. MgO 처리에 의해 shaving scraps으로 부터 회수한 hydrolyzed protein의 평균 분자량은 약 80~100 KD이었고, collagen protein을 구성하고 있는 glycine, alanine 및 proline이 대부분을 차지하고 있었으며, 산성 아미노산인 aspartic acid와 glutamic acid도 상당량 함유되어 있는 것으로 나타났다. 무기성분중 Mg, Ca 및 Na는 액체비료의 무기양분으로서는 다소 많은 양이 함유되어 있었으며, Cr은 약 30~40ppm으로서 원시료 (40,000~42,000ppm)에 비해 크게 감소되었다.

  • PDF

EPMA를 이용한 DUPIC 사용후 핵연료 핵분열 생성물의 특성 분석 (Analysis of High Radioactive Materials in Irradiated DUPIC SIMFUEL Using EPMA)

  • 정양홍;유병옥;주용선;이종원;정인하;김명한
    • 방사성폐기물학회지
    • /
    • 제2권2호
    • /
    • pp.125-133
    • /
    • 2004
  • 최대 선출력 61 ㎾/m 및 평균 연소도 1,770 ㎿d/tU의 조건으로 하나로에서 조사한 DUPIC(Direct Use of Spent PWR Fuel in CANDU Reactors) 핵 연료를 EPMA (Electron Probe Micro Analyzer)를 이용하여 핵분열 생성물을 분석하였다. EPMA의 정확한 분석 방법을 확립하고자, 핵분열생성물 대신 시약을 첨가하여 제조한 모의 DUPIC 핵연료로 EPMA 분석을 수행하였고, 그 결과를 습식 화학 분석의 결과와도 비교하여 평가하였다. 모의 DUPIC 핵연료 중심부의 금속 석출물은 약 1 $\mu\textrm{m}$ 정도의 크기로 관찰되었으며, 이들의 조성은 Mo-53.89 at.%, Ru-37.40 at.% 및 Pd+Rh-8.71 at%이었다. 모의 DUPIC 핵연료 시험에서 정립한 시험방법으로 조사한 DUPIC 핵연료 시편의 금속 석출물 특성을 분석하였다. 핵연료 중앙부에서 관찰된 금속 석출물들의 크기는 2∼2.5 $\mu\textrm{m}$ 정도이었으며, Mo-47.34 at.%, Ru-46 at.%, Pd+Rh-6.65 at.%의 조성임을 확인하였다. 이 실험을 위하여, 특별히 시료의 전도성을 향상시키기 위한 처리를 하였으며, 작은 금속 석출물에 EPMA의 전자빔을 정확히 조사할 수 있는 실험 조건을 제시하였다.

  • PDF

표면 개질된 지르코니아를 함유한 유-무기 하이브리드 코팅액으로 도포된 PET 필름의 특성 (Characterization of PET films coated with organic-inorganic hybrid coating system containing surface modified zirconia)

  • 이수;김상엽;김영준
    • 한국응용과학기술학회지
    • /
    • 제35권3호
    • /
    • pp.595-605
    • /
    • 2018
  • 최근 우수한 유연성과 화학적 안정성 등을 가진 고분자 수지와 우수한 기계적 성질 등을 나타내는 무기 재료로 이루어진 나노 복합 시스템으로써 유-무기 하이브리드 코팅 필름에 관한 연구가 활발히 진행되고 있다. 아크릴레이트 단량체로써 사용된 o-phenylphenoxyethyl acrylate (OPPEA)는 1.576의 높은 굴절률을 나타내고, Bisphenol A ethoxylate diacrylate (BAEDA)는 굴절률은 낮지만 경화된 고분자의 경도를 향상시킨다. 또한, 무기 소재로써 사용된 지르코니아는 산화지르코늄으로써 우수한 내구성과 광학특성 등을 나타낸다. 본 연구에서는 광학 특성을 향상시키기 위한 목적으로 아크릴레이트 단량체 중 BAEDA의 함량을 조절하여 필름을 제조한 뒤 연필 경도계와 아베굴절계를 이용하여 광학 특성 변화를 확인하였고, UV-vis spectrophotometer을 이용해 투과도를 비교하여 최적의 조건을 확립하였다. 그리고 실란 커플링제인 ${\gamma}$-methacryloxypropyltrimethoxysilane (MPS)를 사용하여 지르코니아를 소수화 처리하여 아크릴레이트 단량체에 대한 분산성을 향상시키고, 개질 전후의 물에 대한 분산성 변화를 조사하여 물에 대한 친화력이 감소하였음을 확인하였고, FT-IR ATR spectrophotometer를 통해 MPS에 의해 도입된 $1716cm^{-1}$에서의 에스터 C=O 결합 peak의 존재를 통해 MPS에 의한 지르코니아 표면의 개질 반응이 진행되었음을 확인하였다. 또한, 지르코니아의 표면에 도입된 규소 원자의 존재는 X 선 형광법을 이용하여 확인하였다. 그리고 화학적으로 개질된 지르코니아를 아크릴레이트 단량체에 도입하여 광경화 필름을 제조하였을 때, 굴절률은 아크릴레이트 자체 필름보다 1.2% 향상되었음을 확인하였고, SEM/EDS mapping 분석을 통해 PET 필름에 코팅된 개질 후 지르코니아가 아크릴레이트 코팅층에 균일하게 분포되어 있음을 알 수 있었다.

Preparation and characterization of protein isolate from Yellowfin tuna Thunnus albacares roe by isoelectric solubilization/precipitation process

  • Lee, Hyun Ji;Lee, Gyoon-Woo;Yoon, In Seong;Park, Sung Hwan;Park, Sun Young;Kim, Jin-Soo;Heu, Min Soo
    • Fisheries and Aquatic Sciences
    • /
    • 제19권3호
    • /
    • pp.14.1-14.10
    • /
    • 2016
  • Isoelectric solubilization/precipitation (ISP) processing allows selective, pH-induced water solubility of proteins with concurrent separation of lipids and removal of materials not intended for human consumption such as bone, scales, skin, etc. Recovered proteins retain functional properties and nutritional value. Four roe protein isolates (RPIs) from yellowfin tuna roe were prepared under different solubilization and precipitation condition (pH 11/4.5, pH 11/5.5, pH 12/4.5 and pH 12/5.5). RPIs contained 2.3-5.0 % moisture, 79.1-87.8 % protein, 5.6-7. 4 % lipid and 3.0-3.8 % ash. Protein content of RPI-1 and RPI-2 precipitated at pH 4.5 and 5.5 after alkaline solubilization at pH 11, was higher than those of RPI-3 and RPI-4 after alkaline solubilization at pH 12 (P < 0.05). Lipid content (5.6-7.4 %) of RPIs was lower than that of freeze-dried concentrate (10.6 %). And leucine and lysine of RPIs were the most abundant amino acids (8.8-9.4 and 8.5-8.9 g/100 g protein, respectively). S, Na, P, K as minerals were the major elements in RPIs. SDS-PAGE of RPIs showed bands at 100, 45, 25 and 15 K. Moisture and protein contents of process water as a 2'nd byproduct were 98.9-99.0 and 1.3-1.8 %, respectively. Therefore, yellowfin tuna roe isolate could be a promising source of valuable nutrients for human food and animal feeds.

티타늄 실리콘 옥사이드 나노입자를 첨가제로 사용한 4-iodoaniline을 포함한 하이드로젤 착색 콘택트렌즈의 특성 (Characterization of Hydrogel Tinted Contact Lens Containing 4-iodoaniline using Titanium Silicon Oxide Nanoparticles as Additive)

  • 조선아;성아영
    • 한국안광학회지
    • /
    • 제19권3호
    • /
    • pp.315-322
    • /
    • 2014
  • 목적: 4-iodoaniline을 포함한 하이드로젤 콘택트렌즈 기본 재료에 티타늄 실리콘 산화물 나노입자를 첨가하여 친수성 착색 콘택트렌즈의 물리적 및 광학적 특성을 측정하고 제조된 고분자의 자외선 투과율을 측정하여 티타늄 실리콘 옥사이드 나노입자의 자외선 차단 안의료용 렌즈 소재로의 활용도 및 4-iodoaniline만을 기본 콘택트렌즈 재료에 공중합하여 두 실험군의 물성을 비교 분석하였다. 방법: 하이드로젤 렌즈 제조를 위해, HEMA, MA, MMA, 4-iodoaniline, 교차결합제인 EGDMA 및 개시제인 AIBN을 사용하여 공중합 하였다. 또한, 티타늄 실리콘 옥사이드 나노입자는 첨가제로 사용되었다. 중합 후 제조된 콘택트렌즈 재료의 함수율, 굴절률, 접촉각 및 분광투과율 등의 물리적 특성을 측정하였다. 결과: 하이드로젤 렌즈 고분자의 물성을 측정한 결과, 함수율 35.01~ 38.68%, 굴절률 1.4350~1.4418, 접촉각 $34.15{\sim}57.25^{\circ}$ 그리고 UV-B 투과율의 경우 1.0~10.0%의 범위로 나타났다. 또한 첨가제를 사용하지 않은 실험군에서는 함수율 34.0~36.8%, 굴절률 1.4378~1.4420, 접촉각 $40.15{\sim}60.16^{\circ}$ 그리고 UV-B 투과율의 경우 1.8~25.0% 범위의 분포를 나타내었다. 결론: 티타늄 실리콘 옥사이드 나노입자를 첨가한 조합에서 자외선 투과율이 크게 감소하는 것으로 나타났다.

펄라이트를 첨가한 실리콘 고무 복합체의 내화 및 난연 특성 향상에 관한 연구 (A Study on Improvement of Fire-resistant and Flame-retardant Properties of Silicone Rubber Composites Containing Perlite)

  • 이병갑;이종혁;방대석;원종필;장일영;박우영;지광환
    • Elastomers and Composites
    • /
    • 제46권2호
    • /
    • pp.164-170
    • /
    • 2011
  • 본 연구에서는 실리콘 고무의 내열 및 내화 특성과 같은 열적 특성을 향상시키기 위해 실리콘 고무와 친환경 재료인 펄라이트를 기계적인 방법으로 혼합하여 실리콘 고무/펄라이트 복합체를 제조하였다. 다양한 분석 방법을 통하여 실리콘 고무/펄라이트 복합체의 특성은 펄라이트의 함량에 의존한다는 것을 확인하였다. 열중량 분석에서 순수한 실리콘 고무보다 실리콘 고무/펄라이트 복합체가 더 높은 온도에서 분해가 시작됨을 확인하였다. 가스 토치 시험을 통하여 펄라이트가 첨가된 복합 재료의 후면 온도가 순수한 실리콘 고무에 비하여 현저히 낮음을 알 수 있었고, RABT(Richtlinien fur die Ausstatung und den Betrieb won Stra${\beta}$entunneln) 조건에 따른 내화로 시험 그리고 탄화로 시험에서 펄라이트의 함량이 5 wt% 와 10 wt%인 복합체가 뛰어난 열적 안정성을 나타내었다. 주사전자현미경 (SEM)으로 실리콘 고무 내에서 펄라이트의 분산정도를 관찰하였다. 또한 한계산소지수(LOI)는 펄라이트의 함량에 따라 증가함을 확인하였다.

히알루론산을 함유한 PLGA 지지체의 제조 및 특성결정 (Preparation and Characterization of Hyaluronic Acid Loaded PLGA Scaffold by Emulsion Freeze-Drying Method)

  • 고연경;김순희;정재수;박정수;임지예;김문석;이해방;강길선
    • 폴리머
    • /
    • 제31권6호
    • /
    • pp.505-511
    • /
    • 2007
  • 조직의 재생을 위한 지지체재료의 개발은 조직공학 분야의 연구에 있어서 매우 중요한 요인이다. 히알루론산은 조직을 수복하기 위한 체내이식용 구조물로써 널리 사용되고 있는 천연고분자이며, 이를 이용하여 본 연구에서는 히알루론산을 함유한 락타이드-글리콜라이드 공중합체(PLGA) 다공성 지지체를 유화동결 건조법으로 제조하였다. HA-PLGA 지지체는 수은다공도계, 전자현미경 및 물흡수성을 측정하여 특성을 결정하였다. 제조된 HA-PLGA 지지체의 다공도는 약 96.5%, 전체다공면적은 $261\;m^2/g$ 이였으며, 세포가 성장하기에 적합한 환경인 다공사이의 상호 연결이 전자주사현미경을 통해 관찰되었다. 또한 세포의 생존율과 성장률은 MTT(3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyltetrazolium-bromide) 방법을 이용하여 분석하였고, 사이토카인 및 수용성 약물의 방출경향을 확인하기 위하여 과립구-대식세포 집락자극인자(GM-CSF)를 지지체에 담지시킨 후 효소결합 면혁 흡착검사(ELISA)를 이용하여 이들의 방출경향을 확인하였다. 천연/합성 하이브리드 담체로서의 HA/PLGA 담체가 PLGA 단독으로 사용하였을 때와 비교하여 볼 때 세포의 증식이 우수하였고, 이는 히알루론산의 우수한 생체적합성 및 수분 보유능력에 기인된 것으로 사료된다.