• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.567-570
• /
• 2007

Cell gap dependence on anisotropic phase separation was studied. The results showed that the morphology of phase separation depended on cell gap and material parameters. With numerical simulation and experiments, the optimal range of cell gap in the formation of polymer layer and liquid crystal was suggested for given material parameters.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.13-21
• /
• 2009

A research on material separation of EVA and PET mixture plastic waste using a triboelectrostatic separator has been carried out. It was found that PP was the best charging material to give the highest charge on the surface of EVA and PET mixture plastics with an opposite polarity. Therefore, a charger of pipe line type using PP material was manufactured for separation of EVA and PET mixture plastic waste. At optimum test conditions that used PP cyclone charger developed in this study, we could separate out PET with a glade of 98.7% and a recovery of 89.7%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.353-353
• /
• 2009

It is an important task to construct a recycling society with a low damage on the environment in our century. Magnetic separation is expected to be applied for the industrial waste treatment as an important supporting technology. In the magnetic separation of dry condition, the cohesive force between particles is strong compared with that in the wet condition's magnetic separation. The use of high magnetic field by the superconducting magnet enhances the powder's magnetic substance capture ability of the magnetic separation. In this study, the POSCO's coolant sludge of hot rolled steel was used for the superconducting magnetic separation of dry condition. Cryo-cooled NB-Ti superconducting magnet with 100 mm room temperature bore and 600 mm of height was used for magnetic separator.

• Journal of the Korean Ceramic Society
• /
• v.49 no.2
• /
• pp.185-190
• /
• 2012

The purpose of this study was to examine a possibility that fly ash could be used as raw material for carbonation by conducting the experiment on magnetic separation and hydration of fly ash that contained a large amount of CaO composite. Wet magnetic separation experiment was performed to remove the component of magnetic substance that contained fly ash, which aimed at increasing the content of CaO in the non-magnetic domain. The selected fly ash was used for hydration experiment before the TG-DTA, XRF and XRD analyses were made to confirm the Ca component that could be carbonated. Then, the fly ash was turned to a hydrate that was favorable to dissociation of $Ca^{2+}$ ion. As a result, the magnetic separation enabled detecting the content of CaO component by up to 61 wt% in the non-magnetic domain. Since the hydrate was confirmed, it is believed that the fly ash can be used as raw material for carbonation.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.307-320
• /
• 2011

Polymeric gas separation membrane is the fastest growing field in membrane separation process. Polymeric gas separation membrane process is competitive compare to cryogenic process and pressure swing adsorption process. Aromatic polymer materials such as polysulfones, polypheneylene oxides, polycarbonates and polyimides have been used for gas separation. Recently, glassy polymer likes polyimide in aromatic polymers has been developed for achievement of high selectivity and permeability coefficients. The accurate understanding on a type and structure of polymer material is very important, because the factor that polymer material affect gas separation property. In the study, trend and the development direction on synthesis and permeation properties of polyimide is confirmed.

• Korea Journal of Hospital Management
• /
• v.9 no.3
• /
• pp.49-70
• /
• 2004

This study analyzes the effect of separation of dispensary from medical practice on hospital management performance. The results are as follow. The earning ratios of large size hospitals become deteriorated significantly after the separation of dispensary. The growth ratios of revenues from inpatient were unchanged, but the growth ratios of revenues from outpatient of large and middle size hospitals were decreased significantly. Hospitals can't sell the medicines to the outpatient after the separation of dispensary, but they can do to the outpatient. The labor cost ratios of small and large size hospitals are increased significantly after the separation of dispensary. There are two reasons for increase of labor cost ratios. One is the decrease of material cost ratio. The other is the increase of doctor's salary. The material cost ratios of every size hospital are decreased significantly after the separation of dispensary. Because medicines costs of outpatients are decreased. The labor cost and doctors' salary per patient of middle and large size hospitals are increased significantly after the separation of dispensary. And average treatment fees per day of inpatients of middle and large size hospitals are increased significantly after the separation of dispensary. But those of outpatients are decreased significantly. Average numbers of outpatients per bed of small and large hospitals are decreased significantly after the separation of dispensary. And average numbers of inpatients per bed of large hospitals are decreased significantly. In summary, as a consequence of separation of dispensary from medical practice, management performances of large size hospitals become deteriorated significantly.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.11-19
• /
• 2013

Recovery of pure cobalt and nickel from diverse resources is important due to the increased demand for these metals. In order to get cobalt and nickel with high purity, separation of them from other metal ions is necessary. In this review, several methods to obtain pure cobalt or nickel solution, such as solvent extraction, ion exchange, precipitation were introduced and compared. For solvent extraction, the advantage and disadvantage of the separation process together with detailed process conditions were investigated.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.97-105
• /
• 1998

The goal of this study is to investigate the potential application of triboelectrostatic separation process for removing unburned carbon from fly ash. The process utilizes the difference in electrical charging characteristics between the organic material (carbon) and the mineral matter (fly ash). In the present work, dry separation tests have been conducted on Samchunpo fly ash samples using a bench - scale analytic separator. The test variables studied include air rate, feed rate, electric field strength, particle size, charger material and length, etc. The best separation results were obtained at the air rate 501/min, feed rate 15 g/min and voltage 15 ㎸. The fly ash with carbon content below 1 % was obtained with over 65% recovery.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.2
• /
• pp.15-21
• /
• 2019

In the mine exploration sites, sustainable treatment system of mine water with energy saving and minimized chemical additives is required. Since most of the mine water contains highly-concentrated ferrous ion, it is necessary to study on the removal method of iron ions. We propose the system consisting of two processes; precipitation process by air oxidation using solid catalyst-modified magnetite and separation process combining gravitational sedimentation and magnetic separation using a permanent magnet. Firstly, in the precipitation process (a former process of the system), we succeeded to prepare solid catalyst-modified magnetite. Air oxidation using solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material showed high iron removal capability. Secondly, in the separation process (latter process of the system), solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material can be separated by a superconducting bulk magnet and a permanent magnet.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.2 s.24
• /
• pp.99-106
• /
• 2007

The purpose of this study presents in Relations between cracks in self-leveling material and quality of floor groundwork surface are experimentally examined. As the first stage, the experiment to observe cracks in self-leveling material constructed on floor groundwork made from various kinds of concrete was carried. As a result, following basic findings were obtained. First, observation of cracks should be continued until an increase in width of cracks stop, without constructing any finishing material. Second, degree of cracks may be indicated quantitatively by the product of length and width. Finally, Cracks and separation is not be influenced by specimen size. Based on these findings, the method of predicting cracks by evaluating surface layer quality of floor groundwork will be established.