• New & Renewable Energy
• /
• v.19 no.4
• /
• pp.20-26
• /
• 2023

Emitted CO₂ is an attractive material for microbial electrochemical CO₂ reduction. Microbial electrochemical CO₂ reduction (i.e., microbial electrosynthesis, MES) using biocatalysts has advantages compared to conventional CO₂ reduction using electrocatalysts. However, MES has several challenges, including electrode performance, biocatalysts, and reactor optimization. In this study, an MES system was investigated for optimizing reactor types, counter electrode materials, and CO₂-converting microorganisms to achieve effective CO₂ upcycling. In autotrophic cultivation (supplementation of CO₂ and H₂), CO₂ consumption of Rhodobacter sphaeroides was observed to be four times higher than that with heterotrophic cultivation (supplementation of succinic acid). The bacterial growth in an MES reactor with a single-chambered shape was two times higher than that with a double chamber (H-type MES reactor). Moreover, a single-chambered MES reactor equipped with titanium mesh as the counter electrode (anode) showed markedly increased current density in the graphite felt as a working electrode (cathode) compared to that with a graphite felt counter electrode (anode). These results demonstrate that the optimized conditions of a single chamber and titanium mesh for the counter electrode have a positive effect on microbial electrochemical CO₂ reduction.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.396-407
• /
• 2023

The golden apple snail (Pomacea canaliculata) has been utilized as a natural and eco-friendly control of weeds in rice paddy fields. However, P. canaliculata can damage other crops. In this study, the effectiveness of plant extracts from various natural sources that are reportedly effective against pests in the control of P. canaliculata was investigated. The four plant extracts were effective against P. canaliculata and ranked in descending order as green tea seed (Camellia sinensis) > root of red spider lily (Lycoris radiata) > leaves of tobacco (Nicotiana tabacum) > root of sophora (Sophora flavescens). The mortality rate of P. canaliculata was increased using 200 to 2000 mg/kg of green tea seed powder. However, shrubby sophora root extract did not significantly increase the mortality rate. The LC₅₀ and LC₉₀ of green tea seed, tobacco leaves, shrubby sophora root, and red spider lily root were 900 and 2800 mg/L, 956 and 2320 mg/L, 2162 and 5325 mg/L, and 512 and 1054 mg/kg, respectively. The LC₅₀ and LC₉₀ of ground powder of C. sinensis, N. tabacum, S. flavescens and L. radiata were 248 and 646 mg/L, 403 and 733 mg/L, 409 and 905 mg/L, and 493 and 1141 mg/L, respectively. The findings indicate the remarkable control potency of green tea seeds against the golden apple snail. An organic material incorporating the four plant powders may help control green apple snail in an ecosystem-friendly manner.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.601-607
• /
• 2024

The discharge of oily wastewater into water bodies and soil poses a serious hazard to the environment and public health. Various conventional techniques have been employed to treat oil-water mixtures and emulsions; Unfortunately, these approaches are frequently expensive, time-consuming, and unsatisfactory outcomes. Porous materials and adsorbents are commonly used for purification, but their use is limited by low separation efficiencies and the risk of secondary contamination. Recent advancements in nanotechnology have driven the development of innovative materials and technologies for oil-contaminated wastewater treatment. Nanomaterials can offer enhanced oil-water separation properties due to their high surface area and tunable surface chemistry. The fabrication of nanofiber membranes with precise pore sizes and surface properties can further improve separation efficiency. Notably, novel technologies have emerged utilizing nanomaterials with special surface wetting properties, such as superhydrophobicity, to selectively separate oil from oil-water mixtures or emulsions. These special wetting surfaces are promising for high-efficiency oil separation in emulsions and allow the use of materials with relatively large pores, enhancing throughput and separation efficiency. In this study, we introduce a facile and scalable method for fabrication of superhydrophobic-superoleophilic felt fabrics for oil/water mixture and emulsion separation. AlN nanopowders are hydrolyzed to create the desired microstructures, which firmly adhere to the fabric surface without the need for a binder resin, enabling specialized wetting properties. This approach is applicable regardless of the material's size and shape, enabling efficient separation of oil and water from oil-water mixtures and emulsions. The oil-water separation materials proposed in this study exhibit low cost, high scalability, and efficiency, demonstrating their potential for broad industrial applications.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2024

With the increasing demand for wearable sensors that are capable of point-of-care testing, paper-based sensors have been extensively studied. Paper is not only extremely cost-effective but also lightweight and flexible, and it is easy to apply conductive materials such as carbon and hydrophobic substances like wax to its surface. Moreover, the capillary action caused by cellulose fibers in paper allows the flow of liquid without help from external forces, making paper a particularly promising platform for wearable electrochemical sensors. Accordingly, paper-based sensors for detecting various analytes through electrochemical methods have been actively developed. Recently, paper-based electrochemical sensors that utilize electrochemiluminescence (ECL) or electrochromic materials for the optical read-out have been reported. This review introduces the basic fabrication methods and various application strategies of paper-based electrochemical sensors.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.459-467
• /
• 2023

Because an irradiation of 405 nm violet light could have a strong energy, it was used to be sterilized against various microbes in the indoor air condition or fresh food. Escherichia coli is a representative bio-pollutant in the indoor air-borne bacteria, and a hygienic microbe in the horticultural food. This study evaluated the inactivation influences on E. coli DS5α after exposure to 405 nm violet-light (VL) by investigating irradiating time, and the vertical and horizonal distance from light source. The illumination of 405 nm VL was inversely proportional to the distance from the VL source. E. coli DS5α on nutrient agar (NA) was inactivated approximately 50% more than the control when irradiated at 65 cm from 405 nm VL for 3 hours. When compared to the control, E. coli DS5α was inactivated approximately 50% within 70 cm from 405 nm VL for 3 hours. As it was irradiated for 3 hours 70 cm away from 405 nm VL, the horizonal distance from the point was negatively correlated to the inactivation of E. coli DS5α. These results indicated that the inactivation of E. coli DS5α grown on NA medium needs to be irradiated with 405 nm within 70 cm from the light source for 3 hours.

• Applied Biological Chemistry
• /
• v.17 no.1
• /
• pp.63-80
• /
• 1974

The chemical components of Citrus junos produced in Korea were divided into two parts; common and special components respectively. In the former the relation between the physiological effects of the plant and its ripening process was observed periodically while the latter was analyzed the ripening fruits for their effective utilization as food. The results are summarized as follows: 1. The analytical result of seasonal change showed that the rind ratio was higher than the flesh ratio and on a regional basis, the rind ratio was higher in the islands than on land areas. 2. In the experiment the moisture was increased until the third period, but afterwards it was made constant. While the content of crude fat, cellulose, ash, total acid and soluble non-nitrogen material were decreased until the third period and the cotent of cellulose and total acid were continuousely redused until the last period. In con trast with the above the content of reducing sugars was increased but the content of crude fat, cellulose, ash, crude protein and soluble non-nitrogen material were increased until last period. 3. The content of vitamin C was richer in the rind than in the flesh, in the Korean species than in the Japanese. 4. Free sugars; xylose, fructose, glucose were richer in the rind than in the flesh. 5. The content of volatile organic acids was richer in the rind than in the flesh. Among them, volatile acids, acetic acid, formic and n-valeric acid were found in the rind and formic acid, acetic acid and propionic acid were deteceed in the flesh. 6. The total content of non-volatile acids was richer in the flesh than in the rind. In the kind of non-volatile acids, citric acid,glutaric acid, malic acid, tartaric acid, oxalic acid, malonic acid, succinic acid and an unknown acid were found in the rind and citric acid, malic acid, succinic acid, oxalic acid, glutaric acid and malonic acid in the flesh. 7. Three kinds of aromatic components: D-limonene, ${\alpha}-pinene$, p-cymene and seven other kinds of unknown aromatic components were detected in neutral essential oils. Among them, D-limonene seemed to be main aromatic component in the fruits. 8. From the above results it is confirmed that both rind and flesh of the ripened fruit could be utilized for food effectively, and unripened fruits are suitable for producing citric acid, ripened fruits are also useful for producing juice.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.835-852
• /
• 2000

The ultimate goal of periodontal therapy is the regeneration of periodontal tissue and repair of function. For more than a decade there have been many efforts to develop materials and methods of treatment to promote periodontal wound healing. Recently many efforts are concentrated on the regeneration potential of material used in oriental medicine. In some in vitro and in vivo experiments, there have been many evidences that these materials have an effect on bone regeneration. The purpose of this study was to evaluate histologically and radiologically in Sprague-Dawley rats the effects of safflower seed extracts on the regeneration of the calvarial defects surgically produced. So in this study, the critical size defects were surgically produced in the calvarial bone of 30 Sprague-Dawley rats using the 8mm trephine bur. The safflower seed extract was applied into the defect of each rat in experimental group, whereas nothing was applied into the defect of each rat in control group. Rats were sacrificed at 2, 4, 8 weeks following operation and histomorphometric and radiodensitometric analysis were performed. 1. The newly formed bone length was $102.91{\pm}22.05$, $178.29{\pm}24.40$ at 2 week in the each control, experimental group, $130.95{\pm}39.24$, $242.62{\pm}50.33$ at 4 week and $181.53{\pm}76.35$, $240.36{\pm}22.00$ at 8 week($unit,{\mu}m$). In the 2, 4 week, there were statistically significant difference between control and experimental group(P<0.05). 2. The newly formed bone area was $2962.06{\pm}1284.48$, $10648.35{\pm}1284.48$ at 2 week, $5103.25{\pm}1375.88$, $9706.78{\pm}1481.81$ at 4 week, $8046.02{\pm}818.99$, $12057.06{\pm}740.47$ at 8 week($unit,{\mu}m^2$). In every week, there were statistically significant difference between control and experimental group(P<0.05). 3. The radiopacity was $14.26{\pm}.33$, $25.47{\pm}4.33$ at 2 week, $20.06{\pm}9.07$, $26.61{\pm}2.78$ at 4 week, $22.99{\pm}3.76$, $27.29{\pm}1.54$ at 8 week(unit, %). In the 2 week, there was statistically significant difference between control and experimental group(P<0.05). In conclusion, the results of the present study suggest that safflower seed extract initially has an effect on the newly formed bone area, length and radiopacity when it is applied to the calvarial defect of Sprague - Dawley rat. Then. the material has an effect on newly formed bone area and length.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.181-187
• /
• 2004

Preparations of mesoporous materials using various templates and their applicability have been intensively investigated for many years. We studied on synthesizing mesoporous Ti02 with pores in which sensitive compounds having weak physico-chemical properties such as thermal or UV irradiation and low solubility in solvent are trapped. Prior to trapping OMC in the pores of mesoporous titania, OMC was nano-emulsified in O/W system using Lecithin. Thereafter the OMC was trapped in the pores of mesoporous titania using sol-gel method. Main focus of this work is to prepare OMC-trapped mesoporous titania and to trace the stability and solubility of nano-emulsified OMC in the pores of mesoporous titania, and compared with that of mesoporous silica. OMC-trapped mesoporous Inorganic-Organic hybrid titania showed higher factors in sun protecting and a skin penetration phenomenon was reduced.

• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.368-373
• /
• 1996

Korean general medicinal herbs-sasam, gilkyung, jakyak, danggwi, hwangki, and chunkung-were added In the normal brewing procedure as a raw material or in the distilling procedure as a packing material. The distillates from the former procedure and those from the latter procedure were compared in quality and distillation properties. As distillation proceeded, pH of the medicinal herb wine distillate and the control(not added herbs) distillates were decreased, whereas that of the herb packing distillate was increased slowely of $0.05{\sim}0.97$ during $1{\sim}4$ fractions and decreased remarkably of $0.92{\sim}0.98$ afterward. Average pH was the highest of 5.70 in jakyak and lowest of 4.37 In gilkyung. Absorbances of the herb Packing distillate were decreased rapidly of $0.60{\sim}1.59$ in the $1{\sim}4$ fractions but slowely of $0.19{\sim}0.54$ in the next fractions. During distillation both fractional alcohol concentration of the distillates and distillation rate were decreased. Their values were decreased more slowly than the control. Distillation rates of medicinal herb wine distillate were varied by medicinal herb varieties and alcohol concentration of fermented wine. Danggwi and control showed the highest average distillation rate as $0.12\;m{\ell}/sec$ and gilkyung the lowest value as $0.073\;m{\ell}/sec$. Maximum concentration of index component, paeoniflorin of jakyak was observed as 293 mg% in the 5th fraction of herb packing distillate and decrusin of danggwi as 3514 mg% In the 1st fraction of herb packing distillate. The extraction rate was 41.3% for paeoniflorin and 20.5% for decrusin. From sensory evaluation, the highest overall Qualify was observed in the medicinal herb wine distillate of hwangki added wine, the next in those of danggwi and jakyak added wine.